Yeah I'd much rather spend 50 bucks on a holster then drop a 200.00 mod LOL
Vape cases
- Thread starter coffeebum
- Start date
- th_trl_thread_readers 0
- Status
You get a Radius to make a mold yet Coffeebum?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Huh, thought for sure someone who have done that by now. Well, I ordered my second Radius this morning so when the new one arrives I'll send the back up out to you. Will drop you a PM when I shoot it off. Hope things are going well and business is good. I for one, get hit up every time I'm out and about and Vaper's get a look at your work. Their like, man, where I can get one of those?! Talk to ya soon,
Jim
First thread was kinda clunky, starting fresh and hopefully more bandwidth friendly.
I will list the mods I can forge plastic for as they become available.
So far here are models available and prices.
Payment will have to be through PayPal, or send a money order. PM for all that.
istick 30w $30.00 (clip only)
iStick 50W $40.00
Vapor Shark rDNA 40 with Shark Skin $40.00
Vapor Flask dna 40 $40.00
REO Grand $40.00
Billet Box $40.00
Shipping: USPS first class is $3.00 and Priority I will do for $6.00
(US only, PM for shipping estimates to another country)
These are made from a material called kydex, it is a thermoformable plastic used in various applications including knife sheaths and handgun holsters.
I have been working with this material for several years and have a one-man shop providing hand formed custom products.
Custom cases for other mods are possible, but I may require the mod for fitting purposes.
PM me about what you want and I will try to work something out.
I can do faux carbon fiber, many different colors, and different camos and prints. I can also do molle attachments or other types of belt attachments.
Heck if you want a double thigh rig for your custom competition cloud blowers with battery slots I can do it
I will try to keep the imgur gallery updated, all the info (except for pricing) is on there with the pics.
Do you have a mold/would you be able to make a carbon fiber holster for my Lost Vape Efusion? If not, I'm willing to send it you to make one.
Yes sir, just be aware it will take a week or a bit more in my shop with my work-load right now.
I have a couple mods I am making molds for right now, and have had them longer than I anticipated.
Hate to keep someones gear longer than I said it would take. If that's ok respond here if you don't have PM privileges yet, and I will "start a conversation" or in other words PM you to set it up.
I have a couple mods I am making molds for right now, and have had them longer than I anticipated.
Hate to keep someones gear longer than I said it would take. If that's ok respond here if you don't have PM privileges yet, and I will "start a conversation" or in other words PM you to set it up.
Have some new stuff to post, will be getting it up in the next few days.
Been making quite a few cases lately, so thanks all you ECF people for the referrals and good energy!
First an interesting project.
Inverted mod modded case mods...?
Not modular tho, that would be too much modding.
Apparently if you drive a truck for a living you can go through some intense changes in elevation, which will cause all your tanks to leak everywhere. I didn't know this was a thing, but it is somewhat of a problem. DNA 30 and 40, RX 200, and Sig 150 TC cases.
The cases will work in the normal way, just will not stand up because of the cutout in the bottom lip.
Cases will work like this, mounted in the cab of a truck. This way there is no juice-flood when changing elevations.
Here is the clearance on the DNA 30, enough clearance for a 22mm tank.
The other mods have more clearance. This was the smallest of the bunch, and the only one i actually hace a mod and tank to show off with.
Been making quite a few cases lately, so thanks all you ECF people for the referrals and good energy!
First an interesting project.
Inverted mod modded case mods...?
Not modular tho, that would be too much modding.
Apparently if you drive a truck for a living you can go through some intense changes in elevation, which will cause all your tanks to leak everywhere. I didn't know this was a thing, but it is somewhat of a problem. DNA 30 and 40, RX 200, and Sig 150 TC cases.
The cases will work in the normal way, just will not stand up because of the cutout in the bottom lip.
Cases will work like this, mounted in the cab of a truck. This way there is no juice-flood when changing elevations.
Here is the clearance on the DNA 30, enough clearance for a 22mm tank.
The other mods have more clearance. This was the smallest of the bunch, and the only one i actually hace a mod and tank to show off with.
Here is a real beast, a TMOD dual 18650 squonker. Skull camo with red felt case, which goes great with the mods color scheme.
The newest REO, the P 67
Interesting project, by that I mean harder than I thought to get right.
Interesting project, by that I mean harder than I thought to get right.
Last edited:
Looks great, thanks coffeebum!
Any luck on the Lavabox yet? Been looking everywhere for a decent holder for mine and your products look way better than everything else out there. Would totally love one for my mod.
I don't have a mold for one yet, someone would need to send one in to fit up.
Most of the cases I have available were through trades with forum members for the use of their mods.
I have two more in the shop to prototype right now, I hope to finish them in a couple days so they can go home.
A plain-Jane case is $40.00 plus shipping, fancier kydex is from $3.00 to $5.00 more
Felt lining is an additional $20.00
Shipping is $6.00 in the US and runs about double that to other countries.
Hey Bum! Checked out your newer designs, and you are KILLIN' it my friend! Nice job especially on the "no-leak" trucker cases!
Update on my felt lined CC case- zero problems and no felt pulling after four months of daily use!
Next project:
Just got a bicycle. I plan on commuting to work with it. Its going to need mounted custom classic case on it.
Any chance you could drill 2 extra holes and include 2 extra spacers ( instead of a clip) once I get you c2c measurements of the mounting screws?
Fortune favors the Bottom Feeders.
Update on my felt lined CC case- zero problems and no felt pulling after four months of daily use!
Next project:
Just got a bicycle. I plan on commuting to work with it. Its going to need mounted custom classic case on it.
Any chance you could drill 2 extra holes and include 2 extra spacers ( instead of a clip) once I get you c2c measurements of the mounting screws?
Fortune favors the Bottom Feeders.
Yeah sure, if you can include a pic along with the measurements that will help.
Just PM me with the specs and we will work it out.
Glad the case is holding up!
- Status
Similar threads
- Locked
