Search results

  1. T

    How Long Do You...

    i literally NEVER have a problem with mine, i wrap it, tighten it down, don't even test with a multimeter (cause i have wrapped so many darn coils by now, and know what to look out for, and know a 3/4 wrap with 32 for me gets me 1 ohm every time) and put the cap on pour juice in and vape, i've...
  2. T

    IGO-L Rebuildable Stainless Steel Dripping Atomizer Anyone have one of these?

    ok ok 2x 2mm sounds more and more appealing, tonight i will have a project once the lady goes to sleep
  3. T

    IGO-L Rebuildable Stainless Steel Dripping Atomizer Anyone have one of these?

    I make jewelry and have BurLife, it's amazing for keeping burs and bits living through some heinous work lol
  4. T

    IGO-L Rebuildable Stainless Steel Dripping Atomizer Anyone have one of these?

    you use a drill press to get the second hole in there? I'm thinking i'll try 2x 1.5mm airholes in one of mine...
  5. T

    IGO-L Rebuildable Stainless Steel Dripping Atomizer Anyone have one of these?

    im going 2.5mm on one of them soon ;) and people, the airhole strongly correlates to the coil you run, lower ohm coil=bigger airhole
  6. T

    GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 1

    The Paps X is what we should be focusing on ;) the pictures ive seen are ridiculous
  7. T

    Panasonic CGR 18650 Batteries

    I am getting MNKE's soon, i also just orderd some more of these Panasonics, as they have treated me well. Picked 4 up brand new with battery cases for $20.06 shipped.
  8. T

    Ea mod

    looking good BA. yes the EA is one of the more efficient MODs on the market as of right now, ESPECIALLY a telescoping device. These are extremely nice and i think one day some people will wish they had purchased one
  9. T

    IGO-L Rebuildable Stainless Steel Dripping Atomizer Anyone have one of these?

    I own quite a few of these little buggers, i have airholes that range from 1.5mm-2mm+ for me :toast: if the sky is blue in my town on a certain day...it's cause i haven't woken up and started vaping ;)
  10. T

    Low Ω 28g vs twisted 32

    twisted 32g @.6ohm for me recently and it just gungs up too quickly, the gunk builds up in the crevices of the wire, I never seem to have good luck making a twistd wrap work. i prefer a 3/4 of 32 @1 ohm it lasts much longer and vapor seems to be just the same for me as a .6-.7ohm twisted. just...
  11. T

    iSeason Mechanical Mod -- Adam clone w/brass contacts

    check my sig ;) i have nothing but non china mods with the exception of the iseason. The Mortar v4 and the EA are the most efficient followed closely by the Gus and Paps, the iseason is a little behind those it doesn't hit nearly as hard as my other devices but it's not bad at all, can test...
  12. T

    SmokTech The Natural - New mechanical device

    i don't have one but i know how to fix it. take the switch apart, take the spring, cut one full loop off of it, stretch it out a little and you hvae a much easier throw.
  13. T

    Bless me, father, for I have sinned . . . . .

    mesh around ceramic?
  14. T

    IGO-L Rebuildable Stainless Steel Dripping Atomizer Anyone have one of these?

    just setup a twisted 32g 3/4 wrap around 2x 3mm silica on one of my IGOs.... .6 ohms, and it's rocking. these are the best atty for the price around hands down, and i can put most genesis attys to shame with this lil dripper. 2mm airhole=must
  15. T

    iSeason Mechanical Mod -- Adam clone w/brass contacts

    i have a mini gentech torch for jewelry prop/oxy and i just put it on my soldering station tweezers and got a tiny tiny flame going and torched it until it started to change. not the best job i've done, but not the worst, i have only heat treated a few pieces of SS and before this they were all...
  16. T

    Mechanical mods from the Philippines?

    thanks to Fury i have a Mortar v4 on the way
  17. T

    iSeason Mechanical Mod -- Adam clone w/brass contacts

    it adds a little contrast and unique something i am digging this device
  18. T

    iSeason Mechanical Mod -- Adam clone w/brass contacts

    Not yet, I am working on finding magnets for my EA first, then going to find them for this as well. I am going to do some hunting tomorrow.
  19. T

    iSeason Mechanical Mod -- Adam clone w/brass contacts

    No rings, rainbowed button, and no spring. I can't handle it how it was, but im starting to like it now especially with this twisted 32g .6 ohm coil...clouds for days haha
  20. T

    show us your wicks, all you RBA drippers!

Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu