◙ Li’l PINCH (←thang) ◙ pdib (←maker) ◙ not sayin’ (←just sayin’) ◙ shuh-ZAM! (←hyperbole)

Status
Not open for further replies.

Rossum

Eleutheromaniac
Supporting Member
ECF Veteran
Verified Member
Dec 14, 2013
16,081
105,232
SE PA
Just curious because My island property looks pretty similar to that right now. What equipment did you use to tackle that job?
We started with a 5' brushhog on a tractor (MF 1533). Kept the brush hog pretty high, more-or-less like you see in that picture, because we didn't really know what was in there, and backed the tractor in. As a general rule, it's best to start clearing undergowth in the "winter" when the deciduous plants don't have leaves on them, 'cause that increases visibility by a lot. You really don't want to hit big rocks, big stumps, or stuff like that with your brush hog if you can avoid it. However, we started this area in May, when things were already well on the way to leafing out. We also got a DR walk-behind brush mower, which lets you get in tighter. What I was doing this past week is mainly clearing deadfall branches and such, so I could hit the entire area with the zero-turn mower, and the pic was taken after I'd run the mower through most of it.
Looks like you may have sticks and small logs in the mix there?
Yeah, the little sticks that are laying flat don't bother me; I just wanna be able to cruise through there with the regular mower every 4-6 weeks during the growing season to keep the undergrowth from coming back. There's another area on the other side of the house that we cleared last winter and it's starting to look more-or-less like a lawn. There are also two really big logs laying in there (not in the frame of that picture) that we still need to drag out of there and cut up.
 
  • Like
Reactions: X-Puppy

X-Puppy

Cloud Hound!
ECF Veteran
Verified Member
Sep 13, 2013
2,262
12,612
Marysville, Washington, USA
We started with a 5' brushhog on a tractor (MF 1533). Kept the brush hog pretty high, more-or-less like you see in that picture, because we didn't really know what was in there, and backed the tractor in. As a general rule, it's best to start clearing undergowth in the "winter" when the deciduous plants don't have leaves on them, 'cause that increases visibility by a lot. You really don't want to hit big rocks, big stumps, or stuff like that with your brush hog if you can avoid it. However, we started this area in May, when things were already well on the way to leafing out. We also got a DR walk-behind brush mower, which lets you get in tighter. What I was doing this past week is mainly clearing deadfall branches and such, so I could hit the entire area with the zero-turn mower, and the pic was taken after I'd run the mower through most of it.

Yeah, the little sticks that are laying flat don't bother me; I just wanna be able to cruise through there with the regular mower every 4-6 weeks during the growing season to keep the undergrowth from coming back. There's another area on the other side of the house that we cleared last winter and it's starting to look more-or-less like a lawn. There are also two really big logs laying in there (not in the frame of that picture) that we still need to drag out of there and cut up.
Great strategy, LOL, you've done this before! :)

I've been using an 18HP DR on the farm down the street at our garden. Very handy! :)

When I was out of commission taking care of my parents the grass on the farm got about 2ft tall. :blink:
The DR came in quite handy for the toughest areas. The John deer 300 took care of the rest but I did have to clean out the deck a few times. Looks like we just cut down hay. :lol:
We have 2 JD 300's right now. The older 300 works better than the 230. The 230 chokes up from the grass buildup pretty easy.
I have a new respect for the little John Deer's. They've taken quite a bit of abuse with just normal maintenance.

I was doing pretty deep research on tractors but ended up buying my new truck instead. My old Tundra was 20yrs old and after what turned out to be a bad tank of gas, I figured it was time.

I've got tractor on the brain now. Anyone else ever have that problem?

I'll have to see how my job works out first. I finished training my replacements from Mexico last month. Things are coming to a slow depressing death at work right now. I'm thinking I might go to BOEING for my last few years and make some big bucks before I get laid off again. :sneaky:

And retire on the island! :p

Hmm... I'll need a boat... next up, boat on the brain. :w00t:

(An anchor for my wallet) :lol:
 

Doffy

Vaping Master
ECF Veteran
Verified Member
Mar 15, 2014
8,220
40,975
Australia
Cold [emoji3063]

301263a8a8d7a931ab20035ca0621369.jpg
ef48e4e6f5da5cc220faede2a4520fc4.jpg
46e38169ac54cf76e825306270054f0e.jpg
65666b1a13b7518b88d0b9377dffd248.jpg
6259b26f5fa1f7f31a979af2cee6d146.jpg
e34cecf8b9ad0ad3f9ad72a5757f3a27.jpg
ccb2d167547f842012091ac256161639.jpg
96edecb822ebd24489506728f1bd0667.jpg
1f716f7e7a895004d89fc05b94f69aa2.jpg
 

Doffy

Vaping Master
ECF Veteran
Verified Member
Mar 15, 2014
8,220
40,975
Australia
buggered

went to The Picasso Century | NGV

some good, some bad. Peers of picasso good

interesting looking at early 20th canvas stretchers. Linen not cotton, presumably prior to advent of staple guns, so hammer tacs on edges and not such tight stretch

some falling apart, but mostly ones with old paint technology that was pickier about layering techniques than modern stuff
 
  • Like
Reactions: X-Puppy

Doffy

Vaping Master
ECF Veteran
Verified Member
Mar 15, 2014
8,220
40,975
Australia
@pdib is not sharing again

latest is a bit max ernst

this is max ernst

16020.jpg


who did things like cover canvas in paint, smoosh a sheet of glass on it, remove glass and work with the happy accidents that resulted

bee didn't do that

but arrived in a similar sensibility
 
Status
Not open for further replies.

Users who are viewing this thread