1.3ohm / 1.5ohm / 1.7ohm Dual Coils, which should I choose?

[Carmiol]

Im being offered DCs at these ohm ratings. I dont know which to pick. Im worried 1.3 is too low and will burn the liquid or something... The battery can handle any of the three.

What do you suggest?

 

[fray]

What voltage are you vaping it at?

 

[BardicDruid]

Can't answer until we know what your putting them on.

 

[Carmiol]

Its a 4.2V freshly charged, 3.7V underload battery.

It CAN handle the amps from either 3, so the battery is not an issue for me, just want to know which would be a better vape experience.

 

[DAlberto]

The lower the resistance the hotter the coils will get leading to faster vapour production and quicker juice usage. It's an alternative way to using variable voltage mods to generate the same effect. Different juices react different to different heats so I would suggest getting at least one of each and trying them all with the same juice and see which one you prefer.

I've tried xl clearomizers in two different resistances and both my brother and I couldn't really tell a difference. If I remember right the resistances were 2.5 and 2.3 ohm on a ego-t battery.

 

[Mudflap]

Not helpful, but you need to try one of each resistance for each flavor you vape to determine which one suits you best.

 

[fray]

A 1.3 ohm dc carto has 2 2.6 ohm coils. You will not burn juice on a 2.6 ohm coil at 3.7v

I would get a 1.3 and/or a 1.5 and see what you like.

 

[upStomp]

Start in the middle and work your way out .

 

[Carmiol]

A 1.3 ohm dc carto has 2 2.6 ohm coils. You will not burn juice on a 2.6 ohm coil at 3.7v

I would get a 1.3 and/or a 1.5 and see what you like.

So chances are I wont be able to tell the difference between 1.3 and 1.5ohm?

 

[fray]

I think you will. The difference between a 2.6ohm coil and a 3 ohm coil is noticable.

 

[hairball]

My suggestion is to get some of each to try with each type of juice you have. I run all 3 at 5V and nothing gets burned...that's the beauty of these dc's...no burning/scorching. My favorite to use above 5V is 2.5ohm dc's that crystalclearvaping sells. I also use the ego mega d's with an adapter for a bunch of my mods. But a get some of each and try for yourself to see what you like.

 

[Carmiol]

I can see 2.6 and 3.0 being different, but will I tell the difference between 1.5 and 1.7 or between 1.3 or 1.5? To begin with, has anybody tried 1.3?