100% Leakproof RDA

[Isidzukuri]

Hello everyone,

searching for a leakproof rda. Currently i use Achilles rda (doesn't leak even if turned upside down, holds 2-2,5 ml of juice), but it has very tight draw.
Is there any RDA that is totally leakproof but has medium to high airflow level?
Thanks.
P.S.: preferably single coil
P.P.S.: Immortalizer Plus?

 

[edyle]

manta v2
air intake at the top,
air channelled down to hit the coils from the sides.

$7.43 MANTA V2 Style RDA Rebuildable Dripping Atomizer - stainless steel / 22mm dia. at FastTech - Worldwide Free Shipping

 

[edyle]

that immortalizer plus looks leakproof too;
looks like it takes air from the top,
the air must go down the space between the two concentric cylinders
then channelled under the coil and up up the middle.
(that ceramic insulator is real classy too)

 

[Winchester]

Hi,
When you find one that is 100% leakproof please let me know. I have been looking for one for years!

 

[Rabbit Slayer]

NOT the Nixon

 

[Isidzukuri]

Hi,
When you find one that is 100% leakproof please let me know. I have been looking for one for years!

 

[herb]

that immortalizer plus looks leakproof too;
looks like it takes air from the top,
the air must go down the space between the two concentric cylinders
then channelled under the coil and up up the middle.
(that ceramic insulator is real classy too)

This looks interesting , i hate typical three posts RDA's with shallow drip well's but love the really odd ones like the Veritas , Marquis etc...

The Veritas is outstanding for flavor and it's great at preventing leaking as well but not leak proof , i never heard of a 100% leak proof RDA , at least not one that vaped great .

 

[AndriaD]

Hello everyone,

searching for a leakproof RDA. Currently i use Achilles RDA (doesn't leak even if turned upside down, holds 2-2,5 ml of juice), but it has very tight draw.
Is there any RDA that is totally leakproof but has medium to high airflow level?
Thanks.
P.S.: preferably single coil
P.P.S.: Immortalizer Plus?

You might try the new Achilles 2; it's made in much the same way as the Achilles, but the airflow control is a bit different, and apparently adjustable to higher airflow than the originals. So far they haven't been cloned though; they're only on the titanium-mods site, about $90-$95 USD. There's been some talk about Yeahsmo cloning them (they cloned the original Achilles) but so far they're not available. And a lot of us Achilles lovers are waiting very impatiently for that.

Andria

 

[laredmond]

Any top airflow rda will be basically leak proof. I recommend the Vector RDA or the Aeolus Lite RDA for decent quality at an okay pricepoint.

 

[edyle]

This looks interesting , i hate typical three posts RDA's with shallow drip well's but love the really odd ones like the Veritas , Marquis etc...

The Veritas is outstanding for flavor and it's great at preventing leaking as well but not leak proof , i never heard of a 100% leak proof RDA , at least not one that vaped great .

I have 3 30mm sized veritas, and they've been highly leak resistant; having only 1 airhole to begin with I just have to keep that hole upward if I lay the mod down, or I technically one could turn the topcap to block of the airhole entirely, but I never felt the need to do that.

 

[suprtrkr]

Wotofo Sapor is top air. It would leak if you turned it upside down, but if it falls over, you've got time to set it up.

 

[Isidzukuri]

You might try the new Achilles 2; it's made in much the same way as the Achilles, but the airflow control is a bit different, and apparently adjustable to higher airflow than the originals.

Just wrote to Stamer, manufacturer of the Achilles, about the air hole diameter. As soon as he replyes i'll post it here, but i think that i'll just drill my air vent hole to that diameter, because i cannot find reasons to pay almost 100$ for 99% similiar device (Okay, 85$ because i'm in Ukraine

I see only 3 differences with v1. - 1) airflow control ring 2) larger air hole diameter 3) different design. And the only thing that i need - larger air hole.

 

[AndriaD]

Just wrote to Stamer, manufacturer of the Achilles, about the air hole diameter. As soon as he replyes i'll post it here, but i think that i'll just drill my air vent hole to that diameter, because i cannot find reasons to pay almost 100$ for 99% similiar device (Okay, 85$ because i'm in Ukraine

I see only 3 differences with v1. - 1) airflow control ring 2) larger air hole diameter 3) different design. And the only thing that i need - larger air hole.

But the original Achilles has a very small diameter in the airflow stack directly under the coil. I think the v2 has a larger diameter there as well as the hole on the side.

Andria

 

[Isidzukuri]

Originally 1.2 mm of the airflow stack (increased my to 1.5 mm) and v2 seems to have something like 2mm. But the airflow stack is cone, so it is possible to make it 2 mm.
But anyway i'm waiting for Stamer to answer about the v2's diameter, just to be sure.
P.S. The hole on the side is already 2 mm

 

[snipeslayer]

Wotofo Sapor is top air. It would leak if you turned it upside down, but if it falls over, you've got time to set it up.

I second this. I have a friend who has one and he let me play with it for a bit. I cannot see an easy way for it to leak everywhere.

I also would say just don't over drip on any RDA and it shouldn't leak. If needing more juice is your thing, look into an RDTA.

 

[Isidzukuri]

So i've got answer about the airflow stack of the Achilles v2 - 2.5 mm.

 

[Bunnykiller]

as long as gravity is present, 100% leakproof isnt going to happen

 

[dannyboi]

bottom airflow like the mutation xv4 is gonna be more prone to leaking. for me i just hit my rda and blow on it till the cotton is near white and holds little juice soaked

 

[Woofer]

as long as gravity is present, 100% leakproof isnt going to happen

Achilles (and Prometey) only leak if you overfill them but no need to they both hold a few mils.
Maybe not 100% but 99.9%