1st drag with rcr123a 6v killed my 901 annty.. whats wrong? help please

[brisk7188]

i just got my rcr123a tenergy batts today and i put them in the sb. but they werent full charged i just threw them in the sb right out of the box to see if there was a charge and took my first drag and a little smoke can out and then next thing you know my 901 annty was dead... And before that i was vaping that same 901 with my 18650 batts and it was working great for about 4 days tons of vaper.....So after that i threw the 18650 back in the sb to see if that 901 antty would work. But it didnt. thous rcr batts killed my 901 annty... what am i doing wrong..?? im scared to blow another annty.... what should i do.

 

[brisk7188]

forgot to add .... i have the rcr123a 750 mah lifepo4 batts

 

[solitary1]

Chances are that you might have been a little dry in the atty.I have killed at least four atties this way.My woman on the other hand vapes nothing but 6v on the SB(dripping)and has no problems.You have to keep the atty very wet,to a 3.7v or stock batt user this would be flooding.To give you some idea your 18650 will make the atty glow orange,6v will make it glow white(much hotter,much faster)this will allow it to burn through flooding conditions.Stick with it,pour on the juice and you will get the hang of it.You might want to stock up on the atties as well.

 

[brisk7188]

Thank you bro .... i have 3 anntys left wish me luck..... im going to flood it then 4 to 5 drops the right?

 

[clyde2801]

1. Be especially careful with the first drag using a freshly charged battery. (I've read that initially they can be charged above the stated maximum.

2. As already stated, keep that puppy wet!

3. Don't hit it too much in a row. When using HV, I feel the outside of my atty with my finger to make sure it's not getting too hot.

4. Don't fill up your cartridge and stick it on a hot atty you've just used. The extreme heat, rapid cool down can cause premature failure.

5. Consider a HV atty. IMO, it doesn't cut down on the vapor, but for me they stand up to abuse a little bit better than reg attys.

 

[brisk7188]

my liquid taste burn ... for some reason at 6v liquidxpress artisan ... my favorite liquid... could it be the new annty..?

 

[brisk7188]

like i said in an other post i just break in the annty a little more with 3.7 and ill try going back to 6v... maybe it s the liquid it just can hold up...... but either way i look at the bsb is the best..... this is my 2nd mod and will be my last unless they make a new one... im happy with 3.7 vaping truthful... tons of vaper... puts the vp2 to shame... Thanks everyone again for the help... im going to keep digging threw post and threads to see what go juices are for 6v.... this 6v thing is a hole new level.....

 

[boochips]

like i said in an other post i just break in the annty a little more with 3.7 and ill try going back to 6v... maybe it s the liquid it just can hold up...... but either way i look at the bsb is the best..... this is my 2nd mod and will be my last unless they make a new one... im happy with 3.7 vaping truthful... tons of vaper... puts the vp2 to shame... Thanks everyone again for the help... im going to keep digging threw post and threads to see what go juices are for 6v.... this 6v thing is a hole new level.....

A dry atty will taste burnt too.....I HATE that...lol

 

[brisk7188]

Thanks guys ive been mainly post in another thread . But i blew 3 901 atty already and i got 3 hours out of 1 annty and its was the best vaping i ever experianced mega vapor. And all the other attys died on the firrst drag. I heard 901 atty pop the easiest at 6v im going to order hv attys and some510s time to stock up and experiment.

 

[doots]

901s dont hold up to 6v imo. ive poped too many of them.