2 questions about cotton wick

Status
Not open for further replies.
I would like to try cotton wick on my taifun gt. there is a specific guide for my atom?
The most important think that I would know, is this: dry cotton burns with a flame, compared with mesh and wick that doesn't. So I think that also if the cotton is wet, it should exale something bad for our organism, due to the coil that reach high tempratures.
There is any study about pulmons damages/problems based on exalations of cotton?? Also if not, there is probably more exalations compared to a wick? Some users talks about their own problem about this??
I' m very in doubt about using it, at the end our pulmons are importants, and I think that if there isn' t any study about that, maybe is better for our health if we use mesh or wick. Unless we wanna be a guinea pig :blink:

Last question: how many days cotton should stay in the coil after changing it??

thanks a lot.
 

Ryedan

ECF Guru
ECF Veteran
Verified Member
Mar 31, 2012
12,869
19,652
Ontario, Canada
I would like to try cotton wick on my taifun gt. there is a specific guide for my atom?
The most important think that I would know, is this: dry cotton burns with a flame, compared with mesh and wick that doesn't. So I think that also if the cotton is wet, it should exale something bad for our organism, due to the coil that reach high tempratures.
There is any study about pulmons damages/problems based on exalations of cotton?? Also if not, there is probably more exalations compared to a wick? Some users talks about their own problem about this??
I' m very in doubt about using it, at the end our pulmons are importants, and I think that if there isn' t any study about that, maybe is better for our health if we use mesh or wick. Unless we wanna be a guinea pig :blink:

Last question: how many days cotton should stay in the coil after changing it??

As you know cotton can not be dry burned to clean it like you can with silica or stainless steel. You have to replace it. Even if you replace it every day, it's probably cheaper than using silica or stainless steel.

As long as you keep it wet, it will not burn. The only issue I'm aware of that people worry about are chemicals used on cotton in the process of cleaning and/or bleaching it. I use cotton that is used for first aid, which has a bit of antiseptic (hydrogen peroxide) in it. I don't worry about inhaling that. A lot of people use organic cotton. Some people wash their cotton. I'm not aware of any scientific testing ever being done on the safety of cotton.

If you look long enough you will find some people have expressed health concerns with silica and also stainless steel. I'm not aware of any scientific testing ever being done on these materials either. I use them all. I do not vape a atty that is burning juice, I fix that immediately. I also do not make SS too hot. I have never read anything that convinced me that any of these wicking materials were dangerous when used properly.

I have left cotton in my attys for up to a week occasionally. Usually I replace it after a few days because performance does decrease after a while. It lasts longer if you do not put too much into your coil, which will choke it and cause it to degrade faster. I do not worry about it being in there too long for any health reasons.
 
Last edited:

Lexx

Senior Member
ECF Veteran
Feb 15, 2014
204
123
United Kingdom
Definitely use organic cotton as the conventional kind is one of the world's dirtiest crops (most amount of pesticides used). These chemicals cannot be completely removed during washing or boiling.

Organic cotton is often only a £ or $ or € more than the regular kind and still makes cotton the most economical wick material available.

Silica (fibre glass) is known to cause various lung problems if the dust is inhaled. Personally I would avoid using silica wick for this reason even if our risk of inhaling particles is low.

Cotton is king for chimney-style atties, IMO.
 
Status
Not open for further replies.

Users who are viewing this thread