22mm Tank Recommendation, please

[proax9]

I'm looking for a tank with the following specs...
1. 22mm diameter
2. Minimum 4 ml capacity, prefer 5ml.
3. Can be run with a single self made coil. ( No drop-in in coils)
4. Adjustable air flow ( I set up for DL 99.9% of the time).
5. Top fill.
6. Able to run at .5 ohm ( I have a few KFs but they can't keep wicks saturated regardless of juice flow setting, not really a sub ohm tank).

I think that's about it. Any suggestions would be appreciated.

 

[Topwater Elvis]

Might get better response in the rebuildable atomizer systems / RTA subsection considering this forum is for ' drop in ' replaceable head type tanks.

 

[Skeebo]

The 22mm Griffin if you can find one.

 

[bombastinator]

5ml 22mm is hard. Lot of space for a small RTA. Some sort of oddity will be required. Iirc a bellus has 5ml in a 22mm form factor. It’s got problems though. For one it’s a true PITA to wick right. Plus it’s dual coil. Tiny tiny dual coils.

 

[Skeebo]

I found some...

Griffin RTA by Geek Vape - Two-Post | Black & Stainless Steel

and even cheaper here:

GeekVape Griffin RTA Rebuildable Tank Atomizer

 

[Skeebo]

5ml 22mm is hard. Lot of space for a small RTA. Some sort of oddity will be required. Iirc a bellus has 5ml in a 22mm form factor. It’s got problems though. For one it’s a true PITA to wick right. Plus it’s dual coil. Tiny tiny dual coils.

Ahhh the old Bellus..lol What a great tool for anger management.

 

[bombastinator]

I found some...

Griffin RTA by Geek Vape - Two-Post | Black & Stainless Steel

and even cheaper here:

GeekVape Griffin RTA Rebuildable Tank Atomizer

Gonna be hard to wick single coil because of the 4 wick wells. Could be done though. Build the coil between the posts running sideways then split the wick to either side on both ends so the wick goes in all 4 channels. Lot of space to fill. Fluffing the wick ends will likely be key to prevent leaks. Maximum diameter for a between posts single coil, plus you’ve got to fill 4 wick channels.

 

[bombastinator]

Ahhh the old Bellus..lol What a great tool for anger management.

As in “if I can build this thing without throwing it through the window there’s no way “X” can possibly piss me off”?

 

[bombastinator]

I also want to say origional ammit, but I don’t know if it’s got the juice volume or not.

UPDATE: yeah. 3.5ml. Close but no cigar. Also getting one would be hard.

 

[Steamer861]

I have a few KFs

Witch K-F's do you have? A K-F V5 sound like it could fit your needs
A Merlin is also a good choice

 

[Skeebo]

Gonna be hard to wick single coil because of the 4 wick wells. Could be done though. Build the coil between the posts running sideways then split the wick to either side on both ends so the wick goes in all 4 channels. Lot of space to fill. Fluffing the wick ends will likely be key to prevent leaks. Maximum diameter for a between posts single coil, plus you’ve got to fill 4 wick channels.

Ahh I missed the single coil request. I can't think of anything other than the Bellus. I actually have two of them still in their box in pristine condition.

 

[DPLongo22]

I'm looking for a tank with the following specs...
1. 22mm diameter
2. Minimum 4 ml capacity, prefer 5ml.
3. Can be run with a single self made coil. ( No drop-in in coils)
4. Adjustable air flow ( I set up for DL 99.9% of the time).
5. Top fill.
6. Able to run at .5 ohm ( I have a few KFs but they can't keep wicks saturated regardless of juice flow setting, not really a sub ohm tank).

I think that's about it. Any suggestions would be appreciated.

The Fumytech GoTank fits your description but I'm not sure they can still be found. Too bad because they're great little atties.

 

[Foggy Road]

This tank is probably exactly what you're looking for! Offers a choice of drop in CL coils (lousy) or the optional CLR coil (rewickable, rebuildable, perfect).

Joyetech eGo ONE Mega V2 Tank

For more info just ask around in this thread. Don't like the style? There are more than a dozen other tanks available that accept the CLR coil. Just ask in this thread. Tell 'em Foggy sent ya.

eGo ONE tank series – CLR coil

 

[DPLongo22]

This tank is probably exactly what you're looking for! Offers a choice of drop in CL coils (lousy) or the optional CLR coil (rewickable, rebuildable).

Joyetech eGo ONE Mega V2 Tank

For more info just ask around in this thread. Don't like the style? There are more than a dozen other tanks available that accept the CLR coil. Just ask in this thread. Tell 'em Foggy sent ya.

eGo ONE tank series – CLR coil

My personal favorite too (as you know), but the OP did mention no drop-ins.

But yeah; if I was forced to choose JUST ONE, the Mega V2 would be it.




Pass the eggrolls.

 

[bombastinator]

Witch K-F's do you have? A K-F V5 sound like it could fit your needs
A Merlin is also a good choice

Sounded to me like he wants some sort of sub ohm. The only KF sub ohm is a gigantic thing. The issue is space. 22mm attys just don’t have a lot of it, and DL vapor chambers tend to not be small. Anything is going to be super tall. Bubble glass maybe? Won’t be 22mm all the way up and you’ve got the glass fragility factor but there would be room.

 

[DPLongo22]

The Fumytech GoTank fits your description but I'm not sure they can still be found. Too bad because they're great little atties.

These are the GoTanks. Wide range of air options too. I believe they're 4ml capacity. Upon further review, they're only 3ml (sorry).

Of course, you can always dress them up too, @Katdarling style.

I hope they make a comeback someday (hint-hint, Fumytech, if you're watching).

 

[bombastinator]

The Fumytech GoTank fits your description but I'm not sure they can still be found. Too bad because they're great little atties.

MTL again though. Big issue I think is it’s not clear what tank type exactly. DL, RDL, or MTL?

 

[Steamer861]

Sounded to me like he wants some sort of sub ohm. The only KF sub ohm is a gigantic thing. The issue is space. 22mm attys just don’t have a lot of it, and DL vapor chambers tend to not be small. Anything is going to be super tall. Bubble glass maybe? Won’t be 22mm all the way up and you’ve got the glass fragility factor but there would be room.

Most 22's are going to be tall if you're looking for 4 or 5 mil capacity.
I routinely run .5ish in my K-F V5's It is a restricted lung hit but fairly open draw.
A Hussar & a Skyline are 2 more good choices

 

[DPLongo22]

MTL again though. Big issue I think is it’s not clear what tank type exactly. DL, RDL, or MTL?

I've heard people say they're RDL too. I'm never really certain about that stuff. I just vape.

 

[Foggy Road]

My personal favorite too (as you know), but the OP did mention no drop-ins.

But yeah; if I was forced to choose JUST ONE, the Mega V2 would be it.




Pass the eggrolls.

True but the CLR is kinda thpethial. Figgered I'd let the OP decide for himself whether or not he considered the CLR a drop in.