24gauge

[komanji]

Hey guys I have some 24 gauge kanthal what would be a good dual coil build for clouds right now I have a dual coil 4wraps each side and puts out decent clouds but I want to get more out of it

 

[GodOfThunder]

What are you wrapping your coil around (5/64 drill bit, paperclip, etc) and what size air holes you have make a difference. Also, up your vg to get more clouds, but you sacrifice flavor in the process.


vaping and using Tapatalk

 

[mackman]

24 takes a long time to heat up.

 

[TrolleyVW]

Yeah need more specifics on your current. Someone will probably chime in on safety and all that. I know that 4 wraps of 24 gauge on anything smaller than 3/32 ID is really really pushing it. It's like .1something so I would be careful. Otherwise, godofthunder has it right. More VG and larger airholes. You can only go so low in resistance before you are just wasting juice and battery life.

 

[deedupdex]

for 24g go with a 7/64 bit and do a 5/6 wrap use 30 amps at least 7/64 holes

 

[tmel]

for 24g go with a 7/64 bit and do a 5/6 wrap use 30 amps at least 7/64 holes

I have some 24g coming today, and I first didn't believe this post...then I looked at the name and yup, this man knows his wire.

 

[deedupdex]

I have some 24g coming today, and I first didn't believe this post...then I looked at the name and yup, this man knows his wire.

Hello brotha thanks! but it also has a lot to do with personal pref. You can adjust by top cap holes, wraps, and 7/64 or 1/8 inside diameter bits. I personally wouldn't go any where under a 7/64 I.D due to the thick wire heating up and burning to hot for the wick inside the coils. Feel free to pm me anytime guys!