28 ga a-1 kanthal

[kwalka]

I have 13 packages with 100' of 30 ga wire in them. "This is the end, oh oh the end my friends". 6 lbs of wire, it was bitter sweet when the white spool appeared under the wire as it un-rolled this morning for the last time. It has been my pleasure to help do this for all of my fellow vapers.
Come and get it before it's gone. Please pm for these last 13 so we don't go over.

If you paid in the last 24ish hrs it just shipped 15 mins ago.

My typing voice is much better than my real life voice

 

[Pete379]

Hey Ken I just got home from a week on the road and was greeted by a package of wire from you. Thank You!!!!! I really like the 30g the best and now I have plenty to play around with. This was a great thing you did for all of us! Thanks again. RG

 

[Aurora-Oblivion]

Only 30g left, or 28g too? Which is more ideal to use?

 

[kwalka]

Hey Ken I just got home from a week on the road and was greeted by a package of wire from you. Thank You!!!!! I really like the 30g the best and now I have plenty to play around with. This was a great thing you did for all of us! Thanks again. RG

Right on man. You are welcome

Only 30g left, or 28g too? Which is more ideal to use?

Only 30 and I bet the consensus is 30. I know in my expert (genesis) opinion, I prefer the 30

 

[asdaq]

My vote is for the 30. I can substitute the 32 for 30 without complications, wrapping is easy, pins still fit and 10 wraps of 30 gets me to 2.2Ω. Lovely full vape. The 28G doesn't look like it will fit as well, needs more intensive wrapping care and I'll need probably 14 wraps. That stuff will wait for the FQ tubing.

Ken, would you entertain a re-up for the very last 100' of 30G, directly to me (Poland, no forwarding from US address)? Please let me know, I am quite liking it.

 

[kwalka]

My vote is for the 30. I can substitute the 32 for 30 without complications, wrapping is easy, pins still fit and 10 wraps of 30 gets me to 2.2Ω. Lovely full vape. The 28G doesn't look like it will fit as well, needs more intensive wrapping care and I'll need probably 14 wraps. That stuff will wait for the FQ tubing.

Ken, would you entertain a re-up for the very last 100' of 30G, directly to me (Poland, no forwarding from US address)? Please let me know, I am quite liking it.

Of course, that's not a problem. $3.50. If you aren't familiar with the process just PM.
Thanks

FTR, I used the 30 to wrap a pyrex tube (10 actually) and ithe only way to do it w the 28 would be to use the Petar K method. Because the 28 is so thick.

 

[Aurora-Oblivion]

Only 30 and I bet the consensus is 30. I know in my expert (genesis) opinion, I prefer the 30

Thanks! Well I guess 30 it is then! Hope I didn't miss out due to the posts above? Just got in and replied to your PM, and prefer to wait to hear back once more before sending you the funds. Hope I can still get a pack, thanks!

 

[tiburonfirst]

Right on man. You are welcome



Only 30 and I bet the consensus is 30. I know in my expert (genesis) opinion, I prefer the 30

i'm mulling over a request for a serious favor be prepared! followed your advice and provari mini is now on order with GREEN led! woot!

 

[asdaq]

13 wraps of 28G measuring in at 1.8ohms. A little slow to get going on a mechanical mod, but quite full and rich vapor. Battery life unknown.

Mr. Blurrycam:

 

[XfooYen]

Package received. Very generous. Thank you, K!

 

[kwalka]

3 packages left...

 

[Crack3dOne]

Got my wire, again!!!! Thanks man!!!!!!

You rock!

 

[BuzzKilla]

JUST got my package...

customs may have just been scratching their heads, thinking "why is there wire and rope in an envelope....".

 

[kwalka]

JUST got my package...

customs may have just been scratching their heads, thinking "why is there wire and rope in an envelope....".

That was much faster than the first, no?

 

[BuzzKilla]

That was much faster than the first, no?

about the same... canadian customs is poo!

from Korea it takes 4-6 days (RC car parts)
anything USA, i get worried only after the 4th week lol

I think your shipments were in the two week mark

 

[kwalka]

Me too. I get parts from Korea for the Adam in a few days. But go the other direction over the other pond and the time is significantly increased. One would think it's the opposite.

 

[erich]

Me too. I get parts from Korea for the Adam in a few days. But go the other direction over the other pond and the time is significantly increased. One would think it's the opposite.

It's almost as if we have some sort of trade imbalance with Asia... I'll have to look in to that.

 

[VegasVaporz]

Hey all. I have some twisted 32gauge kanthal and i have yet to get my ihybrid working. I constantly pop the top coil leading to the positive post when I use regular 32gauge. So I twisted some 32 together and am going to try the petark method. My question is, if I have just a 3.7 volt hybrid, how many wraps should I do? If it helps, I vape at 4.7 volts on a 3ohm boge carto on my provari. Any help would be greatly appreciated. Or if I can find some 30gauge untwisted, how many wraps for that? I vape fruit juices and pluid only. So I dont really need like low low ohms that will make me cough or burn my juice

 

[kwalka]

Hey all. I have some twisted 32gauge kanthal and i have yet to get my ihybrid working. I constantly pop the top coil leading to the positive post when I use regular 32gauge. So I twisted some 32 together and am going to try the petark method. My question is, if I have just a 3.7 volt hybrid, how many wraps should I do? If it helps, I vape at 4.7 volts on a 3ohm boge carto on my provari. Any help would be greatly appreciated. Or if I can find some 30gauge untwisted, how many wraps for that? I vape fruit juices and pluid only. So I dont really need like low low ohms that will make me cough or burn my juice

You should be able to execute the Petar K method with the 32 with no prob. The twisted 32 is going to require at least 7-10 wraps to get up to 1.5+Ω. Pm me if you need help once you start the PK method.