• This forum has been archived

    If you'd like to post a thread, post it here instead!

    View Forum

3 Questions

Status
Not open for further replies.
Hi All, I got 3 questions... Recently got across the murky waters to get my stuff. Happily vaping now but encountered some problems
I have a kanger subtank , the big one, Why does it leak from the airholes after 3 hours... It is fine now, but what caused it to leak out?
Where can I get the materials to make a DIY coil, What exactly do I need?
One last one, I bought 2 units a Clouper mini & an e leaf. The same voltage on my clouper produces a stronger concentration of vapour that chokes me but the exact same voltage on my eleaf produces a lighter less chokey vapour. why is it so?
 

WarA

Super Member
ECF Veteran
Verified Member
Jul 24, 2015
487
238
Hi All, I got 3 questions... Recently got across the murky waters to get my stuff. Happily vaping now but encountered some problems
I have a kanger subtank , the big one, Why does it leak from the airholes after 3 hours... It is fine now, but what caused it to leak out?
Where can I get the materials to make a DIY coil, What exactly do I need?
One last one, I bought 2 units a Clouper mini & an e leaf. The same voltage on my clouper produces a stronger concentration of vapour that chokes me but the exact same voltage on my eleaf produces a lighter less chokey vapour. why is it so?

Congrats and welcome!

1. if you look at the design of the chamber, if the cotton is over saturated in the centre portion leaking into the airholes is inevitable. If its on a OCC turn the mod around, cover the airholes and give it a few blows. If its on RBA you can typically rewick(needs trial and error)

2. Kanthal A1 at 26AWG is what i'd recommend together with Koh Gen Do organic unbleached cotton(muji/shiseido is fine too, they'll look slightly yellow with husk on them) and they are readily available. Also a few screwdrivers with estimate size of 2-3mm diameter to coil (Blue screwdrivers provided are usually 2mm). And also check out steam engine to roughly estimate coils.

3. Different manufacturers have different standard of power variation errors.

one more thing, They gave me free 10 bottles of the (I think from green sound) juices, I find it tasted like crap, Tasted exactly like how the bottle smelled, Is it expired or is green sound juices really just crap? And should I keep my liquids in the fridge or leave them in a cool dark area?

Cool dark area will do. As to why its crap, I have yet tried them so its all due to personal preference where expiry is unlikely unless seller is bad.
 
  • Like
Reactions: javafreak

Epic_Sinner

SG Mod
ECF Veteran
Verified Member
May 18, 2013
922
603
Wonderland
Hi All, I got 3 questions... Recently got across the murky waters to get my stuff. Happily Vaping now but encountered some problems
I have a kanger subtank , the big one, Why does it leak from the airholes after 3 hours... It is fine now, but what caused it to leak out?
Where can I get the materials to make a DIY coil, What exactly do I need?
One last one, I bought 2 units a Clouper mini & an e leaf. The same voltage on my clouper produces a stronger concentration of vapour that chokes me but the exact same voltage on my eleaf produces a lighter less chokey vapour. why is it so?

Leaking is caused usually by lack of cotton or cotton is too short from the juice channels. If its OCC coils you can do nothing about it. It is just a bad coil you got. If it is RBA like what Wara said, rewick it.

As what Wara said, different devices yield different power variations. They are not accurate considering the chips they use are of lower quality.

As for your juice flavor, I know that flavor. Yes it is bad, otherwise why would they be free? Common sense bro. They need to clear stock. LOL.
 
Status
Not open for further replies.

Users who are viewing this thread