4 volt to save time.

[Big Hitter]

Since we are in REOville here and usually talking about 18650 or 14500 batts I'm giving up on the 3.7v moniker.

I pretty much used mine from 4.2v to 3.9v so I'm rounding it out and going with 4 volt.

Hence forth my descriptions will contain either 4v, 5v, or 6v

 

[Harrygrowth]

Makes sense to me.

BH You still liking the 6v?

I'm pleased with the 5v batts. Been using them for a couple weeks now with 2.0 boge carto. Not sure about how everyone elses chargers are performing on the 5v but mine charges like a ..... Total charge to 5.75v in about 1.5 to 2 hours. I was thinking it was going to be a 4-5 hour charge.

 

[Big Hitter]

Makes sense to me.

BH You still liking the 6v?

I'm pleased with the 5v batts. Been using them for a couple weeks now with 2.0 boge carto. Not sure about how everyone elses chargers are performing on the 5v but mine charges like a ..... Total charge to 5.75v in about 1.5 to 2 hours. I was thinking it was going to be a 4-5 hour charge.

Yep still digging the 6v myself.
My 5v took 5-6 hours to re-charge ???
(well I used to give it an hour or so after the green light like most vendors recommended)

Although one of the vendors that lists the battery had a pic of a charger that was different than mine .... forgot who.

Were did you get your charger ?? I'd order up one of those for sure

 

[Big Hitter]

To expand on the 6 volt question a bit more ..... HECK YES I am still rocking it full time X3 REOs

To be honest my one and only mini (Cocobolo) barely gets used at all.

Once I got the hang of that warm chewy vapor from a 3Ω carto at 6 volts its been hard to make do with anything else.
Still like the 6v with the IKV 3.5Ω 510 too, but its still my same gripe with attys ..... loss of flavor after just a few hours.

The Cartomizer at 6v is the ticket for this Big Hitter

 

[Mvgratz]

To expand on the 6 volt question a bit more ..... HECK YES I am still rocking it full time X3 REOs

To be honest my one and only mini (Cocobolo) barely gets used at all.

Once I got the hang of that warm chewy vapor from a 3Ω carto at 6 volts its been hard to make do with anything else.
Still like the 6v with the IKV 3.5Ω 510 too, but its still my same gripe with attys ..... loss of flavor after just a few hours.

The Cartomizer at 6v is the ticket for this Big Hitter

Tim, added expense, BUT if you love 6v's and want to actually use that mini woodvil... Get some of the 3.2v batts from Randy and slap a carto on the mini. IFR 14250 3.2v

 

[marcalbar]

Hey BH, Mike, what batts do you use in the Woodvil and Grand for 6v?

 

[Harrygrowth]

Yep still digging the 6v myself.
My 5v took 5-6 hours to re-charge ???
(well I used to give it an hour or so after the green light like most vendors recommended)

Although one of the vendors that lists the battery had a pic of a charger that was different than mine .... forgot who.

Were did you get your charger ?? I'd order up one of those for sure

BH I got the batts and charger at RTD. Charger is the one-banger and was about $12.

I'll do a timer test. I think it's around 4.8v where I can tell the power just isn't there anymore and I switch out.

This charger doesn't light green when charged.

Warm chewy vapor hmmmmm I might like that.

I'll keep you posted.

 

[Mvgratz]

Hey BH, Mike, what batts do you use in the Woodvil and Grand for 6v?

These... AW LiFePO4 RCR 123
Or, these... Amazon.com: Kits: 6 RCR123A 3.0V 750mAh LiFePO4 Rechargeable Batteries with a Smart Charger: Camera & Photo

 

[marcalbar]

Thanks MIke!