5 Hours browsing, a migrane, and still clueless - Help!!

[LilSweetie785]

Im telling you it wont last long..... You get what you pay for in life.....

I went with this one: http://www.myvaporstore.com/Vision_Spinner_Joye_Ego_C_Twist_Combo_p/vvs-c.htm

 

[Vapoor eyes er]

As far as batts go my story:
Twist 1000 mah- loose dial that turns far too easy- batt drains quickly
Twist 650 fires and runs great
2 X 1300 mah Spinners run great.

A friend that owns 2 Spinners-one is only holding 1/2 a charge.
Just seems to be hit and miss but most Twist/ Spinner owners seem quite happy.
Same thing I've got a smoktek 1.7 ohms single coil carto- measures out @ 2.2 ohms. Chinese QC leaves a lot to be desired IMO.

 

[Katya]

You don't need a ProVari!!!!

Just trust me. Please.

 

[Sassington]

I'm am SO glad I found this thread. LilSweetie asked the same questions, had the same concerns, and went with the same starter kit I've had my eye on from MVS. You guys are AWESOME.

Sent from my ADR6425LVW using Tapatalk 2

 

[Katya]

It's a nice kit! Good luck, Sassi!

 

[Sassington]

I went with this one: http://www.myvaporstore.com/Vision_Spinner_Joye_Ego_C_Twist_Combo_p/vvs-c.htm

Soooooo..... We were both interested in the same kit.. :thumbup: You probably ordered your kit before me (I think) - have you had a chance to try it out? If so, what are your thoughts? I should get mine by the end of the week! Keep us updated!

Sent from my ADR6425LVW using Tapatalk 2

 

[Ipster]

You've largely done your homework and know what you want. It sounds like you've done enough vaping to now just find the right supplier.
Not supposed to post links, Im so very happy with the online personalized service I get from the vaporCrave folks. They do take super good care of my questions and inquiries. I know I can phone or email which the larger suppliers just may not be able to handle. Sorry about your migraine. You'll feel better when you are only using the ecigs and no analog tobacco (imho). Best of Luck to you, and welcome!

 

[LilSweetie785]

Soooooo..... We were both interested in the same kit.. :thumbup: You probably ordered your kit before me (I think) - have you had a chance to try it out? If so, what are your thoughts? I should get mine by the end of the week! Keep us updated!

So far my favorite clearo is the Kanger EVOD. The vapor production is AMAZING and it's smooth! The eGo CE4+V2 has good vapor production as well but I prefer the EVOD, not sure why. I'll probably be able to explain it better after another week. I find the vapor production on the T3 is lacking but maybe it has something to do with the liquid, not sure. I feel like I have to inhale for a long time to get an adequate amount of vapor. The batteries are awesome. I am still on the same battery on day 4!

Now I just need to find my favorite liquid and wait for these to steep so they taste better. Hope your kit comes in soon! I am sure enjoying mine.

 

[Vapoor eyes er]

I find the vapor production on the T3 is lacking but maybe it has something to do with the liquid, not sure. I feel like I have to inhale for a long time to get an adequate amount of vapor.

A couple of things you could try. Try, with your finger, plugging one hole at the bottom. If this works plug it with a round toothpick. Also try using a 1.8 ohms atomizer/ head.

 

[Sassington]

So far my favorite clearo is the Kanger EVOD. The vapor production is AMAZING and it's smooth! The eGo CE4+V2 has good vapor production as well but I prefer the EVOD, not sure why. I'll probably be able to explain it better after another week. I find the vapor production on the T3 is lacking but maybe it has something to do with the liquid, not sure. I feel like I have to inhale for a long time to get an adequate amount of vapor. The batteries are awesome. I am still on the same battery on day 4!

Now I just need to find my favorite liquid and wait for these to steep so they taste better. Hope your kit comes in soon! I am sure enjoying mine.

I'm glad it's working well for you! I'm excited to try mine... I went with the 2 evods for my kit choices since it seems evods work pretty well for a lot of people. Now I'm working on ordering additional atomizer heads for the evods - they're $1.50 a piece (awesome!) on MVS and would be good to have on hand when the heads wear out on the evod. What liquids did you get?

 

[Katya]

So far my favorite clearo is the Kanger EVOD. The vapor production is AMAZING and it's smooth! The eGo CE4+V2 has good vapor production as well but I prefer the EVOD, not sure why. I'll probably be able to explain it better after another week. I find the vapor production on the T3 is lacking but maybe it has something to do with the liquid, not sure. I feel like I have to inhale for a long time to get an adequate amount of vapor. The batteries are awesome. I am still on the same battery on day 4!

Now I just need to find my favorite liquid and wait for these to steep so they taste better. Hope your kit comes in soon! I am sure enjoying mine.

Congrats, LilSweetie and I'm glad your gear is working fine for you.

Just FYI, I have never had much luck with any of the CE4s (and CE3s, and CE2s, for that matter ). Other peeps swear by them. It's all about personal preferences. I believe that Kanger is just a better design--but that's my personal opinion.

Happy vaping!

 

[Katya]

I find the vapor production on the T3 is lacking but maybe it has something to do with the liquid, not sure.

A couple of things you could try. Try, with your finger, plugging one hole at the bottom. If this works plug it with a round toothpick. Also try using a 1.8 ohms atomizer/ head.

What he said!

Kangers "feel" cooler than other heads of comparable resistance. Without going into lengthy speculations as to why this is the case, I'll just second Vapoor's sage advice--get lower resistance coils (but don't get the 1.5Ω ones, there have been problems with those), plug one air hole to tighten the draw, and up the voltage a bit. That's what I do too.

Good luck!

 

[Vapoor eyes er]

What he said!

Kangers "feel" cooler than other heads of comparable resistance. Without going into lengthy speculations as to why this is the case, I'll just second Vapoor's sage advice--get lower resistance coils (but don't get the 1.5Ω ones, there have been problems with those), plug one air hole to tighten the draw, and up the voltage a bit. That's what I do too.

Good luck!

Truth be told it's Katya's sage advice I'm just the messenger as I don't own any T3's

 

[Katya]

Truth be told it's Katya's sage advice I'm just the messenger as I don't own any T3's

You don't???? Quelle horreur!

You really should try them. BTW, I ordered a Vision mini ViVi Nova because of your rave reviews; should be here tomorrow. We shall see. I tried one before, a bigger one made by SmokTech, and I didn't really like it. I also didn't like the way it looked on my eGos--I don't care for the lollipop look much.

 

[Julopy]

chinabuye is not the best place to buy.

try
2135 Electronic Cigarettes at FastTech - Worldwide Free Shipping

 

[Vapoor eyes er]

You don't???? Quelle horreur!

You really should try them. BTW, I ordered a Vision mini ViVi Nova because of your rave reviews; should be here tomorrow. We shall see. I tried one before, a bigger one made by SmokTech, and I didn't really like it. I also didn't like the way it looked on my eGos--I don't care for the lollipop look much.

I'm thinking maybe getting a T3 and a ProTank- ProTank I'll wait until Canvape has them in as he's the cheapest. Spotted them the other day selling for $15.99. Problem is too I really like a warm vape. As for the ST Vivi I was "gifted" one by a friend who didn't want it...absolute garbage and a terrible vape- dry hits, leaking...really hoping you like the Vision Mini.
Wheeeee homemade perogies for supper

 

[Katya]

I'm thinking maybe getting a T3 and a ProTank- ProTank I'll wait until Canvape has them in as he's the cheapest. Spotted them the other day selling for $15.99. Problem is too I really like a warm vape. As for the ST Vivi I was "gifted" one by a friend who didn't want it...absolute garbage and a terrible vape- dry hits, leaking...really hoping you like the Vision Mini.
Wheeeee homemade perogies for supper

I guess the ProTank goes on your Vamo.

I like perogies.

 

[Vapoor eyes er]

I guess the ProTank goes on your Vamo.

I like perogies.

Yes. Homemade from scratch. A few yrs ago we had a spagetti dinner non profit fundraiser at the cottage and an elderly Ukrainian neighbor bought a whack of tickets but told me she couldn't attend because her MS meds didn't agree with it...made her a special batch of perogies and I was so very, very touched when she told me they were honestly the best perogies she had ever eaten. I was almost in tears as her husband has Alzheimers and they're just such a sweet couple. Terri and I now take her and her hubby perogies every Christmas. The secret is egg noodle dough.
I do go on don't I too much java and far too busy and great a day at work and I'm justa so pumped

 

[LilSweetie785]

A couple of things you could try. Try, with your finger, plugging one hole at the bottom. If this works plug it with a round toothpick. Also try using a 1.8 ohms atomizer/ head.

Do you mean plug one side where the wicking strings are?

 

[Katya]

Do you mean plug one side where the wicking strings are?

No, no!!! If you look at your Kanger clearo, examine carefully its knurled base--it has three tiny air holes. Just stick a toothpick in one of those air holes and break it off.