510 M Passthrough that also works with 306 series! ON PRE ORDER NOW!!!

Status
Not open for further replies.

applefr3ak

Unregistered Supplier
ECF Veteran
Dec 3, 2008
2,267
1,498
45
Ogden, Utah, United States
Yes, I gave them the specifications to have a 4-5 foot cord, Manual switch with NO cutoff whatsoever (thats what bothered me about other passthroughs) The battery box to protect from overloading your motherboard and or atomizers. So U can push that button and vape as long as you want!!!

Jason
 

robw

Super Member
ECF Veteran
Nov 7, 2008
657
23
Austin Texas
I have a technical question for you. Does the device work with out a battery in the battery box I see in the cable.
The reason I ask is because the cable with the battery box sold by ecigmall requires there to be not only a battery, but a fully charged battery. Also if the battery charge chip dies, the cable can not be used by simply jumping the + and - battery clips with a wire. Their usb cable does not allow direct power from the usb port to the e-cig.

So I was hoping you could check this on your cable.
 

applefr3ak

Unregistered Supplier
ECF Veteran
Dec 3, 2008
2,267
1,498
45
Ogden, Utah, United States
im not sure if i specified black and white, i need to take that off the site if i have white on there at all.. sorry doode.. i believe they are all black, i will check with suppler and ask.. in the next day or so.. but im pretty sure they are all black, my prototype is white tho..

Jason
 

applefr3ak

Unregistered Supplier
ECF Veteran
Dec 3, 2008
2,267
1,498
45
Ogden, Utah, United States
on a side note, to all of you who are ordering the passthroughs.. please do them on a completely seperate order than your other items, as i will probably lost track of them.. and i will end up losing a lot of money on shipping ;) but i talked to the supplier tonight, all black units, no white ones :( but they are coming... hoping for the 28th or 29th as a ship date!
 

applefr3ak

Unregistered Supplier
ECF Veteran
Dec 3, 2008
2,267
1,498
45
Ogden, Utah, United States
in my next shipment after this first 50 i will have the white passthrus.. now i recently saw someone on the forum who was upset about the price.. well mine is cheaper from janty, we spent nearly 4000.00 to do the INITIAL run of these! And joyetech sent MY prototypes to janty and they bought them. I got a little upset after spending so much time on the phone with joye discussing design, specifying and making sure it would be manual etc.. and then to my dismay.. its up on janty's site... now about the 25.00 ok fine dont freaking buy it.. seriously.. sure i do have a markup on them. Im a business with operating costs etc.. and most my pricing is below the norm anyways.. But the fact that we put up the money to get these made and now another company has them is really shady to me.. i really dislike china sometimes for that reason. then again we are all out to make a buck and hopefully help people. and i hope that customers continue to buy from me because im personable, you can talk to me on the phone, ask me questions in chat i bust my but to make sure orders go out before post office cutoff time etc.. and if you read my testamonial section. i think i am doing an okay job. i could always just say the heck with the passthrough then u would all have to order through janty....

sorry to rant but sheesh.. and dont be suprised if you start seeing a lot of sellers raising prices in the not so distant future.. things are getting really hard to get into the country and we are taking huge risks every time we order.. some of us could lose our whole business if we lose a shipment..
 

Krakkan

Unregistered Supplier
ECF Veteran
Feb 22, 2009
855
4
New Orleans, LA
www.truesmoker.com
Yeah I would be fired up if I personally designed something that helps my customers just to watch them get sold to a competitor who put no effort into the creation of these whatsoever and tries to take credit for them.

But at least you can always say you created them can't take that away as so many know the truth like me. I believe people will appreciate these products either way.:)
 

rsngfrce

Super Member
ECF Veteran
in my next shipment after this first 50 i will have the white passthrus.. now i recently saw someone on the forum who was upset about the price.. well mine is cheaper from janty, we spent nearly 4000.00 to do the INITIAL run of these! And joyetech sent MY prototypes to janty and they bought them. I got a little upset after spending so much time on the phone with joye discussing design, specifying and making sure it would be manual etc.. and then to my dismay.. its up on janty's site... now about the 25.00 ok fine dont freaking buy it.. seriously.. sure i do have a markup on them. Im a business with operating costs etc.. and most my pricing is below the norm anyways.. But the fact that we put up the money to get these made and now another company has them is really shady to me.. i really dislike china sometimes for that reason. then again we are all out to make a buck and hopefully help people. and i hope that customers continue to buy from me because im personable, you can talk to me on the phone, ask me questions in chat i bust my but to make sure orders go out before post office cutoff time etc.. and if you read my testamonial section. i think i am doing an okay job. i could always just say the heck with the passthrough then u would all have to order through janty....

sorry to rant but sheesh.. and dont be suprised if you start seeing a lot of sellers raising prices in the not so distant future.. things are getting really hard to get into the country and we are taking huge risks every time we order.. some of us could lose our whole business if we lose a shipment..

I can see why you would be upset about this, particularly since they got them first, but I am under the assumption that Janty designed the 'Yeti' as the Dura (which I could certainly be wrong about, correct me if you know otherwise) and I doubt they are happy that others are selling them cheaper now. Seem like a two way street...

No complaints from me, I've had excellent service from you and your Rum liquid RULES... besides being impossible to find elsewhere. :)
 

cekte

Super Member
ECF Veteran
Feb 5, 2009
412
1
Oregon
www.youtube.com
in my next shipment after this first 50 i will have the white passthrus.. now i recently saw someone on the forum who was upset about the price.. well mine is cheaper from janty, we spent nearly 4000.00 to do the INITIAL run of these! And joyetech sent MY prototypes to janty and they bought them. I got a little upset after spending so much time on the phone with joye discussing design, specifying and making sure it would be manual etc.. and then to my dismay.. its up on janty's site... now about the 25.00 ok fine dont freaking buy it.. seriously.. sure i do have a markup on them. Im a business with operating costs etc.. and most my pricing is below the norm anyways.. But the fact that we put up the money to get these made and now another company has them is really shady to me.. i really dislike china sometimes for that reason. then again we are all out to make a buck and hopefully help people. and i hope that customers continue to buy from me because im personable, you can talk to me on the phone, ask me questions in chat i bust my but to make sure orders go out before post office cutoff time etc.. and if you read my testamonial section. i think i am doing an okay job. i could always just say the heck with the passthrough then u would all have to order through janty....

sorry to rant but sheesh.. and dont be suprised if you start seeing a lot of sellers raising prices in the not so distant future.. things are getting really hard to get into the country and we are taking huge risks every time we order.. some of us could lose our whole business if we lose a shipment..

At the risk of some disliking my statement... That does not invalidate it.

JOYE Techs Alibaba page has had the manual switch style Passthroughs for the 510 pictured for quite some time now.

See: USB passthrough charger electronic cigarette Manufacturer exporting direct from Guangdong China

Companies in other countries have been offering this exact unit, Manual switch, inline battery, 510. Black or white. Branded, even (takes longer production lead times, larger MOQs, more $ invested) These being available for quite some time through said companies.

See: Translated version of http://www.liberty-cig.com/ - (translated link- French site) For some reason the translated link will not let you click on the specific model in discussion. However, if you click the "View Original Web Page" link, you should be able to see large pics and read a full French description of such.

Will you blame Liberty Cig as well? When they were selling it much before mention of it here. Perhaps not to many members knowledge, but still available. I find it very hard to believe you had something 'specifically designed for you', and invested such money in its development.. When it has already been developed and available for quite some time elsewhere. :confused:

Heck, Ive even got one coming any day.

:confused:
 
Last edited:

applefr3ak

Unregistered Supplier
ECF Veteran
Dec 3, 2008
2,267
1,498
45
Ogden, Utah, United States
No i dont blame anyone, thats completely understandable. Although while talking to my rep out there they said they did not produce them at all. So we had to buy a minimum of 500 units to have them produced. So i was basically lied to and forced to spend more money then.. which still kind of ticks me off. I was not blaming janty whatsoever. I was blaming Joye. Who said they produced the prototype to the specs i gave them etc.. so no worries.. But im sure you can see why i would be a little ticked with the information i had. I have no ill feelings towards janty nor any other supplier. In fact i talk to a lot of different suppliers every day. But thanks for the heads up.. time to sqwak at joye a bit..

Jason
 
Status
Not open for further replies.

Users who are viewing this thread