801 901

Status
Not open for further replies.

dormouse

ECF Guru
ECF Veteran
Oct 31, 2010
12,347
1,611
Pennsylvania
I agree - they have different adapters for 801 and 901 so they must be different.

You stick a 901 to 808 (aka 901 to KR808D-1) adapter on the 901 to provide the air inlets and use KR808D-1 cartos (blanks or Vapor4Life prefilled ones)
http://www.madvapes.com/901-Battery-to-808-D-Atomizer-adapter-_p_2648.html

In the opposite direction, a KR808D-1 (or Vapor4Life.com in colors) battery can use dse901 atomizers directly because the air inlet hole is provided in the atomizer.

If you really specifically want to use 801 cartos (no idea why since KR8 has a much larger variety of cartos) you could get a 901 to 801 adapter
 
Last edited:

dormouse

ECF Guru
ECF Veteran
Oct 31, 2010
12,347
1,611
Pennsylvania
Not without an adapter. As far as I know, the 901 and KR808D-1 threading is the same. The problem is the air access for the cartomizer. I believe you must use a 901 to KR808D-1 adapter like I linked above to use Vapor4Life cartos on a 901 - not to fix the threading but to provide the air notches needed to be able to let air get to the bottom hole of the cartomizer. I believe if you screw a Vapor4Life carto on a 901 battery without the adapter then it will fit but you will not be able to suck air through it.

Alternately, you could replace your 901 batteries and use KR808D-1/Vapor4Life batteries which can use both the Vapor4Life cartos AND the DSE901 atomizer with no adapter.
 
Last edited:

VaporMadness

Ultra Member
ECF Veteran
Jan 26, 2010
1,521
7
CA, USA
Alternately, you could replace your 901 batteries and use KR808D-1/Vapor4Life batteries which can use botht eh Vapor4Life cartos AND the DSE901 atomizer with no adapter.

From what i've read, KR8 batts sound like a good thing. Full voltage, nice choice of sizes, and the biggest one has a very respectable capacity (380 mah). If i were a skinny batt user, i think these would them for me.
 
Status
Not open for further replies.

Users who are viewing this thread