A GotVapes.com Worldwide Debut - The All New SMOKtech TELESCOPE™

[LordDavon]

I know this question has been asked, so let's do a little QA!

Q: Does the Kick work in the Telescope?
A: Although a little bit (very little) tricky to get out, it works great!

 

[Jeepster08]

This is good to hear! I posted a WTB add in the Classifieds earlier today in hopes that I can find a Kick to use in this.

I know this question has been asked, so let's do a little QA!

Q: Does the Kick work in the Telescope?
A: Although a little bit (very little) tricky to get out, it works great!

 

[Jeepster08]

Are you planning a video review on this new device?

I know this question has been asked, so let's do a little QA!

Q: Does the Kick work in the Telescope?
A: Although a little bit (very little) tricky to get out, it works great!

 

[LordDavon]

Are you planning a video review on this new device?

Yes. I will be reviewing the Telescope. If I can get some good testing in, then I can start recording on Thursday.

 

[burns_erin]

Ok, so first impressions. One, I was like a nervous virgin, too scared to get the kick in more than a little bit, I'll try again later. Two, it feels nice in my hand though it's lighter than I expected. Still very solid and everything seems well put together.

THREE, AND THIS IS CRUCIAL. IF YOU USE A BUTTON TOP BATTERY AND PUT IT IN UPSIDE DOWN, IT WiLL BE CONTINUALLY ON. Please bear this in mind.

Four, don't get surprised like I was. The bottom/button assembly screws off (not just the safety shut off). This means if you are a machinist, or if smoktech wants, they could easily make longer tubes so a kick would fit in with an 18650. Also, if the top part unscrewed like that it would be mooey easier to handle a kick.

Thus far I'm really liking it though.

 

[dannoman]

Completely forgot to upload the pic of that but yes this has a bottom assembly separate from the tube you can screw off entirely:

Ok, so first impressions. One, I was like a nervous virgin, too scared to get the kick in more than a little bit, I'll try again later. Two, it feels nice in my hand though it's lighter than I expected. Still very solid and everything seems well put together.

THREE, AND THIS IS CRUCIAL. IF YOU USE A BUTTON TOP BATTERY AND PUT IT IN UPSIDE DOWN, IT WiLL BE CONTINUALLY ON. Please bear this in mind.

Four, don't get surprised like I was. The bottom/button assembly screws off (not just the safety shut off). This means if you are a machinist, or if smoktech wants, they could easily make longer tubes so a kick would fit in with an 18650. Also, if the top part unscrewed like that it would be mooey easier to handle a kick.

Thus far I'm really liking it though.

 

[burns_erin]

Completely forgot to upload the pic of that but yes this has a bottom assembly separate from the tube you can screw off entirely:

It can be quite startling when you go to lock the pv...and the whole bottom shoots off and hits your cat if she stays mad and pisses in my husbands shoes, I'm blaming you

 

[Infinite]

The mechanical at the price point I have been waiting for.. Drool. Concerned about the Kick though. Not a go if no kick...

 

[kurtus]

The mechanical at the price point I have been waiting for.. Drool. Concerned about the Kick though. Not a go if no kick...

Kick has been confirmed to fit it's just a bit tricky to get out, a good wack into your palm should get it to come out of the tube just fine though.

 

[Drew_]

is it vented?

 

[DancingHeretik]

Shiny! Not really in the market right now, but, . . . . .

 

[Drew_]

Again..is this mod vented? Pretty much a must for an all mech mod like this.

 

[burns_erin]

The mechanical at the price point I have been waiting for.. Drool. Concerned about the Kick though. Not a go if no kick...

My kick is doing well, but this probably isn't the right pv if you are going to want to change it often.

 

[burns_erin]

Again..is this mod vented? Pretty much a must for an all mech mod like this.

Not specifically vented so far as I can tell, but there is room to vent in the button and threading on the middle pipe IYSWIM.

 

[billy2boots]

Wow, sure is purdy

 

[Briar]

Mine should be here later today...

I'll be Kicking it for sure. Fortunately, I don't need to change my wattage much. Just waiting for the Kick to surface again...

 

[dannoman]

I had figured SMOKtech did not put a venting hole in the bottom because of the firing button and this is what they told me:

[5:06:06 AM] SMOKTECH: there is no need , the telescope's buttom and threads all can vent , vent is no problem for sure , if u search u will find that a lot of mechanical mod of this kind on the USA don't have visiable venting hole as well

 

[Drew_]

SMOKTECH: there is no need , the telescope's buttom and threads all can vent , vent is no problem for sure , if u search u will find that a lot of mechanical mod of this kind on the USA don't have visiable venting hole as well

......

 

[AnsonJames]

Shame Smok didn't copy something that had a vent in it.

 

[WallyO]

Yeah, they should have. I would think that would be a standard for everything today whether it really needs one or not. People like to see that hole. But it's not that hard to drill an inconspicuous hole in the base somewhere if that's an issue for you.