Hello all, was wondering if any one out there uses a adapter from alt. for there janty stick...If so how do you like it... Thanks....
adapter for the janty??
- Thread starter catholic83
- Start date
- th_trl_thread_readers 0
- Status
If you are talking about the 510 adapter for the JantyStick, then Id hold off on that. If you are talking about the 901 adapter, they work well. I dont know a think about Alt, but I do know there are problems with the first batch of 510 adapters from Janty and its anticipated to be corrected towards end of October.
yea i heard about the janty adapters but, was wondering about the adapter(510) from altsmoke used on a janty stick any one uses one???
tell ya what, you guys send me your Jantysticks...and I'll let ya know if they work or not 
...trust me
...trust me
lol good one ....its a deal I will send you my janty and you can send me a silver bullet...
i'll happily send in my stick for another SB! Rob- How nice of you to extend this offer to us.
Already order 510 adapter on the way. I'll try on my janty stick and let you know later. But I think it will work except its lenght might not enough. Since 510 atty + CT + adapter will be roughly 1 cm shorter than 801 atty + CT.
I got the adapter from Alt Smoke about 2 days ago, and have been trying it on all my 801 batteries, it works great with all of them, including the stick.
One thing to keep in mind, the Alt Smoke adapter is small, the 510 cartridge only extends out maybe 3/4 inch, make sure the cart is a snug fit. And I worry about the adapter getting stuck in the stick when I unscrew the atomizer. Lastly, I drip, and it's kind of hard to drip the 510 being completely recessed. The Janty adapter would be optimal for the stick, but JantyUSA seems to be floundering right now, it's the only option.
One thing to keep in mind, the Alt Smoke adapter is small, the 510 cartridge only extends out maybe 3/4 inch, make sure the cart is a snug fit. And I worry about the adapter getting stuck in the stick when I unscrew the atomizer. Lastly, I drip, and it's kind of hard to drip the 510 being completely recessed. The Janty adapter would be optimal for the stick, but JantyUSA seems to be floundering right now, it's the only option.
In theory it will work, but in practice it will probably get stuck in the Stick.
I thought I'd try it but gave up half way through tightening it in, as it seemed likely to end up being stuck on the connector at the base of the chamber.
Yeah, sounds like you'd have a permanent 510 JS. Otherwise you could start stacking adapters on top of each other!
I got the 510-801 adapter for my SB- Its not working very well, if at all- is it possible its broke? I mean is a 510 connector with an 801 connector- is there anything else in it? Is it possible to be broken?
How is the draw? Anything is possible, does a 510 work after using the adapter?
More than likely you've got a probably with the 801 center post not making contact. Got any other 801 atties to try? Try searching for 801 center post. There are tips around the board on how to make sure the post is making contact.
My 801 adapter works 100% of the time on my SB FWIW. Tried both Eastmall's 4 hole atties and legit high bridge SLB 801 atties without any problems.
thanks neko for the info my adapter should be here today..cant wait to try it out...not sure whats up with janty and there 510 adapter.....
Seems like their Janty Stick Dura/510 adapter had some problems and they are doing a revision to the design before releasing it again. The Alt Smoke adapter has been working great for me in the mean time.
The draw is real bad from what I remember- Once the 801 attys weren't working real well, I haven't been using them at all- just my 510s. Tomorrow I will report back once I give them another run. BTW I have Totally Wicked 801 attys and Janty KBC-304 801 attys- If I remember correctly the Jantys have barely any draw- dont quote me on that I'll do some tests tomorrow.
The 510 attys work great.
Thanks
Which adapter should I get if I want to use my 510 atomizer on the janty stick V2? I read this thread and it's not realy clear. I'm thinking it is the 801 to 510 adapter??? but IDK. I'd rather order from rob (somebody I know through video chat) than janty (somebody i dont know) if that makes any sense. I like to support those who get to know their customers. So which adapter will i need to use my 510 on my janty stick?
So which adapter will i need to use my 510 on my janty stick?- Status
Similar threads
