adapters for V3

[squirrel64]

Anyone know when 801 adapters for the V3 will be available ??

 

[CaSHMeRe]

hey squirrel ...

they are in stock and you should be able to order sorry about that! didn't realize they showed as being "out of stock"

 

[squirrel64]

Thank You,,, Thought I was gonna have to buy another V3 to get different adapter hehe That was a close one ! By the way,,, lovin the new V3. it's everything I expected and more. Got it with 512 but just wanna try the 810/be112 combo that everyone says is so good.

Thanks for your time

 

[CaSHMeRe]

BE112's are my FAVORITE atomizers and really, the only ones I use so sad most people don't give them a chance. 75% of vapers are 510 users ... and there are only a handful of penstyle (801/BE112) users left in the vaping community

you'll enjoy them

 

[jonny2hottie]

which 112 are you using? whered you get it? i wanna give it a go.

BE112's are my FAVORITE atomizers and really, the only ones I use so sad most people don't give them a chance. 75% of vapers are 510 users ... and there are only a handful of penstyle (801/BE112) users left in the vaping community

you'll enjoy them

 

[cappadoc]

which 112 are you using? whered you get it? i wanna give it a go.

Ummm, I think he uses his own.
Ever been to Puresmoker?

 

[squirrel64]

Steve,,,, Just wanted to say thank you for the recommendation on the BE112 atomizers... Have to say that the V3 6v with these atties compares with nothing else. 801s come close. But this is definitely what I have been searching for. I can't imagine vapor tasting any better than with this setup.

I did use just a cheap adapter on the 510 setup but it does add unneeded length to the whole setup so I will be ordering the DSE801 V3 adapter after the holidays are over. Thanks for the great customer service.

 

[Knifemaker]

I ordered the 801 adapter and a be112 at. to try out. It wont work on the adapter at all. The connection is too large to reach into the adapter. It works fine on the 510 adapter with an after market 510 to 801 screw in adapter.

Also, there is no way for air to flow, even when using standard 801's. The Pure Smoker adapter has no air holes like other brands. It effectively blocks all air to the point that vaping is almost impossible.
It sure would be nice if you could TALK to some one connected with PureSmoker. It would save a lot of grief!

KnifeMaker

Any suggestions?

 

[New_World]

Ummm, I think he uses his own.
Ever been to Puresmoker?

lol

yeah he uses his own

 

[CaSHMeRe]

Ummm, I think he uses his own.
Ever been to Puresmoker?

haha ... that I do cappa

Steve,,,, Just wanted to say thank you for the recommendation on the BE112 atomizers... Have to say that the V3 6v with these atties compares with nothing else. 801s come close. But this is definitely what I have been searching for. I can't imagine vapor tasting any better than with this setup.

I did use just a cheap adapter on the 510 setup but it does add unneeded length to the whole setup so I will be ordering the DSE801 V3 adapter after the holidays are over. Thanks for the great customer service.

Sorry for the delayed response squirrel ... Finally have some time now that the holidays are over! Happy you are loving it. Nothing quite matches the performance of BE112's

I ordered the 801 adapter and a be112 at. to try out. It wont work on the adapter at all. The connection is too large to reach into the adapter. It works fine on the 510 adapter with an after market 510 to 801 screw in adapter.

Also, there is no way for air to flow, even when using standard 801's. The Pure Smoker adapter has no air holes like other brands. It effectively blocks all air to the point that vaping is almost impossible.
It sure would be nice if you could TALK to some one connected with PureSmoker. It would save a lot of grief!

KnifeMaker

Any suggestions?

Knife -- You can email Casey (info@puresmoker.com) if you haven't already and we can exchange the adapter. Once in a while, we'll have an adapter that just doesn't work with BE112's, but we're happy to replace them for you.