Advice needed. 510 connection issues.

[Honigschmidt]

Hi Guys,


I have been using my reo and reomizer 2 without issues for the better part of 2 years.


It’s been dropped many times (not on purpose mind you) but this last drop I think may have done some damage.


Getting out of my car my Reo dropped onto cement and hit Reomizer first. Since that time the reomizer will not screw into place and just slides in and out of the 510 connector.


I have a male/female 510 adapter to see where the damaged was, but to my confusion the 510 adapter screwed in snuggle and securely to the Reo and the Reomizer. So now I am at a loss on what needs to be looked at and fixed.


Anyone have any suggestions, or has had this happen before?

 

[nerak]

After screwing the adapter on to both did you again try the RM2 in the REO?

 

[Honigschmidt]

Definately so. Multiple times.

 

[nerak]

Definately so. Multiple times.

And you can push it down in the 510 and lift it out? Can you see any of the threads on the RM2 that look damaged? Can you try a different atty or rba on the REO?

 

[Sloth Tonight]

Are you using the new 510 connector? If not, perfect time to upgrade

 

[nerak]

If you do decide/have to send it in make sure you include the RM2 with the REO.

I would say call Robert and run this by him first. That guy knows a little something about REO's and RM2's!

 

[Papa_Lazarou]

Sounds like a send in, for sure, but maybe try a couple of things...

* Check the threads on the RM2 - the threading might have broken away.

* Try the RM2 in an ohm checker to see if it threads and makes a connection.

* Try another atty in the Reo and see if connection/firing is normal.

This won't fix any issue, but should tell you whether the issues are with the atty or the reo.

 

[redeyedancer]

Please put
a note with your email address and a brief description of the problem . Also
empty any e juice in the mod and remove the bottle . It helps to put a tissue or napkin around the tube . Please clean the mod if its a mechanical mod flush the mod with hot water and soap . I will send a invoice once the mod is repaired thank you

Reos Mods LLC
120 Ida Jim Rd
Alfred Me 04002

 

[Honigschmidt]

Thanks for the input guys and thanks for the mail in info Rob!

It's that strangest thing to me. The reomizer screws in perfectly to an old OMG Mod I have. Likewise the Reo screws in my first cheap rebuildable I got a year or so ago. without any issues.

Before posting this I made an order for another reomizer, but it sounds very prudent to send it in.

 

[Technonut]

Please put
a note with your email address and a brief description of the problem . Also
empty any e juice in the mod and remove the bottle . It helps to put a tissue or napkin around the tube . Please clean the mod if its a mechanical mod flush the mod with hot water and soap . I will send a invoice once the mod is repaired thank you

Reos Mods LLC
120 Ida Jim Rd
Alfred Me 04002

Answers the question I had regarding sending in my converted VV Grand for the new 510 without needing to PM you. I'll try to get it out this week...

 

[bushmaster]

Techno, have I just......missed it or have you been absent from this subforum for a long time? Sure seems like ages since I've seen you here. Good to see ya again!

 

[Technonut]

Techno, have I just......missed it or have you been absent from this subforum for a long time? Sure seems like ages since I've seen you here. Good to see ya again!

I'm still around from time to time.. Not near as often as "back in the day" though.. Ah, the Golden Age of REOville. Good to see you too my friend, I'll try not to be a stranger..

 

[bushmaster]

I'm still around from time to time.. Not near as often as "back in the day" though.. Ah, the Golden Age of REOville. Good to see you too my friend, I'll try not to be a stranger..

I'm not sure that the "Golden Age of REOville" might not be as aptly referred to as today. This place is smokin' and I don't even know half the folks here. Robert is kickin ..... and I love it. Bottom-feeder and grooving on it!

 

[Papa_Lazarou]

I'm not sure that the "Golden Age of REOville" might not be as aptly referred to as today. This place is smokin' and I don't even know half the folks here. Robert is kickin ..... and I love it. Bottom-feeder and grooving on it!

I suspect that this will be remembered as the golden age of vaping in general - like F1 racing in the '60's & '70's (freewheeling, explosive innovation, little regulation).