hehehehehe, push me all you like, I am not sending any bad vibes your way, sorry.
push push push MY AFS IS BETTER THEN YOURS
AFS feedbacks
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
push push push MY AFS IS BETTER THEN YOURS
nooooooooooooooooooooooooopush push push MY AFS IS BETTER THEN YOURS
not working, sorry
Hey Imeo,
I've been reading the reviews on the AFS. It sounds like it is going to be a SUCCESS!!!
(Just need to work out the dead atty problem.) You are an absolute genius, my friend! 
My only problem is that I probably won't ever be able to experience the pleasure of the AFS because I use strictly DSE 801 (and BE112) atomizers. I own 125 of them, so there is no turning back now. 
Man, I wish I came across the GG forum before deciding to go strictly 801, because I do love the 801. But it seems everything GG is 901. 8-o
I know I asked you this vaguely in PM Imeo, but do you think you will *ever* plan to make an AFS to fit an 801 atomizer? It can't be that much more difficult for an artist of your caliber, can it? Just make the hole in the AFS a little wider and use a wider O-ring, right? Then drill the same tiny hole in the 801 atomizers. Heck, I'd figure out how to get the hole in there myself, somehow. It can't be that difficult for a master artist like yourself. Another nice thing about the 801 atomizer is that it is much longer than the 901. It is almost 50% longer. That means it will not need an extension. So you could make an 801 AFS longer to hold even more juice. If you made an extension for an 801 atty, there would be even more possibilities to hold even more juice. Also, big plus here, the 801 atomizer is known to be able to handle 6 volts much better than the 901, so longer lasting atties for the AFS.
Come on, my friend, at least give me some hope for the future. I am a patient man and I will wait it out.
Man oh man, Imeo, do I wish you lived around the corner so I could come bug you to death.
You're lucky that you don't.
I sure do love being a brand new part of the GG family. All you guys and gals are just great! I have an idea that I bet no one's thought of yet. A handful of us should grab a table at a poker site sometime and play some rounds of Texas Hold'em (for fun of course, unless you wanna lose your loot to me so I can buy more GG's
). I can see it now, sliding our computerized poker chips across the world wide web while we smoke on our GG's and talk about the old days before the AFS existed. hehe.
...No, really, we should do this.
-ESmoking
I've been reading the reviews on the AFS. It sounds like it is going to be a SUCCESS!!!
(Just need to work out the dead atty problem.) You are an absolute genius, my friend! My only problem is that I probably won't ever be able to experience the pleasure of the AFS because I use strictly DSE 801 (and BE112) atomizers. I own 125 of them, so there is no turning back now. Man, I wish I came across the GG forum before deciding to go strictly 801, because I do love the 801. But it seems everything GG is 901. 8-oI know I asked you this vaguely in PM Imeo, but do you think you will *ever* plan to make an AFS to fit an 801 atomizer?
It can't be that much more difficult for an artist of your caliber, can it? Just make the hole in the AFS a little wider and use a wider O-ring, right? Then drill the same tiny hole in the 801 atomizers. Heck, I'd figure out how to get the hole in there myself, somehow. It can't be that difficult for a master artist like yourself. Another nice thing about the 801 atomizer is that it is much longer than the 901. It is almost 50% longer. That means it will not need an extension. So you could make an 801 AFS longer to hold even more juice. If you made an extension for an 801 atty, there would be even more possibilities to hold even more juice. Also, big plus here, the 801 atomizer is known to be able to handle 6 volts much better than the 901, so longer lasting atties for the AFS. Come on, my friend, at least give me some hope for the future. I am a patient man and I will wait it out.
Man oh man, Imeo, do I wish you lived around the corner so I could come bug you to death.
You're lucky that you don't.I sure do love being a brand new part of the GG family. All you guys and gals are just great! I have an idea that I bet no one's thought of yet. A handful of us should grab a table at a poker site sometime and play some rounds of Texas Hold'em (for fun of course, unless you wanna lose your loot to me so I can buy more GG's
). I can see it now, sliding our computerized poker chips across the world wide web while we smoke on our GG's and talk about the old days before the AFS existed. hehe....No, really, we should do this.
-ESmoking
Last edited:
I think the 801 may be next on the list esmoker. The new arrival of the HV imeoatty yesterday will surely put imeo to the lathe making one for it now.... If I understand this man at all he will show us very soon his new atty with the AFS attached and kicking out tons of vapor all day without the need to touch your bottle of juice once... lol...
And yes the AFS actually works like a champ. Like nothing I ever tried before. Total vaping Bliss!!!!
And yes the AFS actually works like a champ. Like nothing I ever tried before. Total vaping Bliss!!!!
I think the problem with the 801 is that it's not the same diameter all the way up - however, Imeo will come up with an AFS solution for this too, don't worry.
Hi,
For about 5 days, I continue using only AFS.
I think that AFS is a splendid device, but liquid leak occurs depending on how to use.
So, I tested various how to use.
The liquid leak of AFS occurs from the inlet port of the atomizer.
In AFS got ready, there is not the liquid leak from other parts.
Therefore I thought.
When I use AFS, I may do an inlet port upward.
Of course, with an inlet port, the liquid inlet port looks up, too.
Therefore I turn to the inlet port below when I want to supply liquid to an atomizer.
I was able to prevent liquid leak by using it while turning AFS timely.
About this how to use, how do the all of you think?
For these several days, I do not watch liquid leak of my AFS
For about 5 days, I continue using only AFS.
I think that AFS is a splendid device, but liquid leak occurs depending on how to use.
So, I tested various how to use.
The liquid leak of AFS occurs from the inlet port of the atomizer.
In AFS got ready, there is not the liquid leak from other parts.
Therefore I thought.
When I use AFS, I may do an inlet port upward.
Of course, with an inlet port, the liquid inlet port looks up, too.
Therefore I turn to the inlet port below when I want to supply liquid to an atomizer.
I was able to prevent liquid leak by using it while turning AFS timely.
About this how to use, how do the all of you think?
For these several days, I do not watch liquid leak of my AFS
Hi Toshi,
It sounds like you have found the best way to use the AFS for you.
Congratulations - I am so happy that you are enjoying using it.
It sounds like you have found the best way to use the AFS for you.
Congratulations - I am so happy that you are enjoying using it.
Thanks Lisa,
By the way, did you experience liquid leak of AFS?
Where of AFS did the liquid leak occur if I experienced it?
By the way, did you experience liquid leak of AFS?
Where of AFS did the liquid leak occur if I experienced it?
I didn't get to experiment with it for very long before my atty died - however, I had a small amount of leakage at one point from the existing atty hole - but this was solved by doing just what you did.
If the o-rings are maintained and replaced as they get a bit old, I don't think there will be any other leakage problems. I am not sure if I would carry it around loose in my handbag when it's full of e-liquid- but it might be fine and I might just be over-worried about it.
I tend to use something smaller when I am on the move - this is why I ordered a new slim GG.
P.S. Toshi-san, Your English skills are great - I think all the people with English as a second language don't get enough thanks for making all the effort with English. I thank you and apologise for my lack of Japanese. Arigatou
Last edited:
OMG! Did you guys see this video??? UNREAL...
YouTube - Imeoatties
And I think that was at 6 volts! Am I hallucinating? Did you guys see what I just saw?! Man do I wish I didn't spend over $700 USD on Chinese atties. Why couldn't I have found this forum a month ago? Oh well, you live and learn, I guess.
I'm gonna HAVE to get me some Imeoatties when he makes the AFS to hold an 801. I just gotta. Maybe I can sell some of my existing atties.
-ESmoking
Did you guys see this video??? UNREAL...YouTube - Imeoatties
And I think that was at 6 volts! Am I hallucinating? Did you guys see what I just saw?! Man do I wish I didn't spend over $700 USD on Chinese atties. Why couldn't I have found this forum a month ago? Oh well, you live and learn, I guess.
I'm gonna HAVE to get me some Imeoatties when he makes the AFS to hold an 801. I just gotta. Maybe I can sell some of my existing atties.
-ESmoking
Last edited:
Thank you so much Lisa,
I use AFS with GGT and 18650 3.7V battery.
I can use without almost doing battery exchange and liquid supplement in half day.
Of course without liquid leak
Thank you again, Arigatou
I use AFS with GGT and 18650 3.7V battery.
I can use without almost doing battery exchange and liquid supplement in half day.
Of course without liquid leak
Thank you again, Arigatou
OMG!
I'm gonna HAVE to get me some Imeoatties when he makes the AFS to hold an 801. I just gotta. Maybe I can sell some of my existing atties.
-ESmoking
You should have no trouble getting your money back from the classified ads on this forum.... I was easily able to sell a few mods to get my GG... Thanks to Stormynights for taking the SB off my hands for her son... So yea as long as they are new you should have no troubles at all...
And I can't believe that video either. I would bet you my paycheck this week that imeo is working on the 801 AFS as we speak.... lol...
I was only able to use my auto feeder for less then half an hour then the atty died. While it worked though it was nice.
Truly amazing
Reminds me of a destruction test done on a Beretta semi-automatic shotgun and after shooting a million rounds through it they gave up!
OK I'll have 6 months supply please, so I'll probably need at least one maybe two
- Status
