About 2hrs almost constant vaping, i'm at 6v so it burns through it pretty quickly
-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
AFS feedbacks
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
About 2hrs almost constant vaping, i'm at 6v so it burns through it pretty quickly
Oh Womble, I really think you might want to think of cutting your juice down further than that.......
If it only lasts 2 hours at 24mg, that's a LOT of nicotine in one day - too much for anyone I would think, surely?
Please consider cutting it a bit more if you go through this quantity.........
.......n thats a hell of a lot of nic being pumped in your body. But I'm glad to see your atty is till kicking. I'm still scared to try it at 6v, I'm more then satisfied at 3.7v for now.
I like pouring my liquid now... screw dripping... I never want to go back to that again... Unless it is just to try a new flavor or something like that. I hardly touch anything else but the AFS now... there is just no reason to anymore. What a hassle all that dripping was.
I have cut down lisa from 36 to 24mg
I don't actually vape that heavily, it was more for testing purposes..see how long a tank lasted at 6v..so i'm guessing about 3.5 hrs at 3.7v
just hoping to give people a guide as to what to expect from the AFS
.......n thats a hell of a lot of nic being pumped in your body. But I'm glad to see your atty is till kicking. I'm still scared to try it at 6v, I'm more then satisfied at 3.7v for now.
My atty died a few days ago crash, the extras i bought showed up
come on hit it up at 6v ya big girl
I have cut down lisa from 36 to 24mg
I don't actually vape that heavily, it was more for testing purposes..see how long a tank lasted at 6v..so i'm guessing about 3.5 hrs at 3.7v
just hoping to give people a guide as to what to expect from the AFS
Thank God you don't normally vape that heavily - cos that is seriously A LOT over a whole day - 8 refills at 2.5ml per refill is 20ml of juice................!!!!!
Last edited:
I think I was on about 3-5ml 18mg a day pre-AFS.
Now I think I am going through about 6-7ml of 9mg with the AFS.
Technically, getting less nic than before but the flavour and hit are the same, even with the PG-cut juice.
I used to vape 3ml at 36mg a day when i was using the pv at 3.7v vapn, since i switched to 6v a while ago now, it has gone to about 5ml, but i likes it
Hi ppl !..From today I am a happy owner of the new AFS ...My first impressions are all positives ...Very nice caps with silver hardness regulators ..The hole GGT now looks like a very robust mechanical statute..
The AFS can go nowhere now
I have no lick of juice except from the known "down" hole which is less than the "old" AFS...
Also because of the new AFS construction, the down hole is hiding inside the cap so it`s a little bit hard for someone, to know where the hole is for doing the appropriate (up or down) move to the GG for coming juice inside the atomizer..I dont know if its a point of luck to me but the AFS tube has a perpendicular line along its body...If we roll the AFS tube as the line comes at the same point of the atomizer hole, then we will know every time where this hole is, so we can make the needed adjustments !!!
The AFS can go nowhere now
I have no lick of juice except from the known "down" hole which is less than the "old" AFS...
Also because of the new AFS construction, the down hole is hiding inside the cap so it`s a little bit hard for someone, to know where the hole is for doing the appropriate (up or down) move to the GG for coming juice inside the atomizer..I dont know if its a point of luck to me but the AFS tube has a perpendicular line along its body...If we roll the AFS tube as the line comes at the same point of the atomizer hole, then we will know every time where this hole is, so we can make the needed adjustments !!!
something for new AFS guys.
You DONT need to have the 2 o-rings inside the atomizer. You will notice that the upper o-ring (near the mouthpiece, isnt inside the upper side of the atomizer because there is no reason for this and because we want to unthread it easily to refill it. Exept that , we can adjust the hardness of the catridge that goes inside the atomizer. You will soon notice that catridge is not inside the atomizer any more but inside the o-ring, so threatening more the AFS upper cap you can adjust how easy or how hard the catridge goes inside the o-ring.
So we solve the loosy or tight mouthpiece inside the atomizers
Also we solved the issue that we didnt knew where to stop AFS when we were putting as new atomizer inside it. Now we know because the atomizer will stop on the upper o-ring. When it stops there, we screw the AFS's cap and we smoke as usual
You DONT need to have the 2 o-rings inside the atomizer. You will notice that the upper o-ring (near the mouthpiece, isnt inside the upper side of the atomizer because there is no reason for this and because we want to unthread it easily to refill it. Exept that , we can adjust the hardness of the catridge that goes inside the atomizer. You will soon notice that catridge is not inside the atomizer any more but inside the o-ring, so threatening more the AFS upper cap you can adjust how easy or how hard the catridge goes inside the o-ring.
So we solve the loosy or tight mouthpiece inside the atomizers
Also we solved the issue that we didnt knew where to stop AFS when we were putting as new atomizer inside it. Now we know because the atomizer will stop on the upper o-ring. When it stops there, we screw the AFS's cap and we smoke as usual
Last edited:
This is my second feedback after 5 days of using the AFS. I am still overexcited and if anyone dares to touch my GG I will cut his hands at once 
.
I had to deal with the option to move the GG with AFS on it around. Since I am on the move last days and not a lot on a desk. So I had to deal with the licking problem through the original hole of the atty. Well I did the obvious one and sealed the original hole with a tape (3M tape cause GG deserves only the best ) The licking stopped 100% and now no matter the position of the GG (even upside down) its perfect.
The GG breaths without problem through the battery and the 3 holes on the bottom. I just cant fill the AFS all the way up cause when I do that its harder to smoke. But I dont care since my AFS even with 70% juice lasts at least 2 hours so I am more than happy. Every time I change batteries I put juice also
Once more big thanks to the men that keep me vaping few moments before I quit it cause of the dripping mess
.I had to deal with the option to move the GG with AFS on it around. Since I am on the move last days and not a lot on a desk
. So I had to deal with the licking problem through the original hole of the atty. Well I did the obvious one and sealed the original hole with a tape (3M tape cause GG deserves only the best ) The licking stopped 100% and now no matter the position of the GG (even upside down) its perfect. The GG breaths without problem through the battery and the 3 holes on the bottom. I just cant fill the AFS all the way up cause when I do that its harder to smoke. But I dont care since my AFS even with 70% juice lasts at least 2 hours so I am more than happy. Every time I change batteries I put juice also
Once more big thanks to the men that keep me vaping few moments before I quit it cause of the dripping mess
Last edited:
kolex, I think you could do the same thing without using tape... just slide the AFS down to cover the second hole. I am assuming you have a cartomizer ready adaptor as well because you mentioned three holes at the battery connection as well.
I am noticing juice leaking from the vent hole also. And maybe I will attempt some modification to my connection so I can do the same. But until then I will have to deal with it.
I am noticing juice leaking from the vent hole also. And maybe I will attempt some modification to my connection so I can do the same. But until then I will have to deal with it.
hmmm didnt think that
I will try it though for sure but even with the tape I am so pleased.
With the tape I dont have anything to think about cause I put my GG with AFS everywhere (car sheats, beds, dinner tables). And I dont use my GG the gendle way... its made for bad use and I like to use it that way. Its more beautiful with the marks of use on it than like a brand new one shinny
O and yes I have the carto ready GG
I will try it though for sure but even with the tape I am so pleased. With the tape I dont have anything to think about cause I put my GG with AFS everywhere (car sheats, beds, dinner tables). And I dont use my GG the gendle way... its made for bad use and I like to use it that way. Its more beautiful with the marks of use on it than like a brand new one shinny
O and yes I have the carto ready GG
I don't get it..... Got my atomizers yesterday and am using with old AFS..... If I drip into atty, I get plumes of vapor....... As the direct drip wears down, sometimes I get a strong vapor and sometimes no vapor at all......
I turn it over 180 degrees and suck on mouthpiece 5 or 6 times without pushing power button..... Then turn it back 180 degrees and start vaping...... Again, sometimes get great cloud of vapor, and other puffs get nothing....... Can somebody help me please..... Thank you.......
I turn it over 180 degrees and suck on mouthpiece 5 or 6 times without pushing power button..... Then turn it back 180 degrees and start vaping...... Again, sometimes get great cloud of vapor, and other puffs get nothing....... Can somebody help me please..... Thank you.......
Take it slow and easy and don't get frustrated. Try turning it a little at a time until you get the feel of how it works. It didn't come easy for me. When you are turning 180 maybe you are just going side to side and not up and down. Are you filling the tank enough? It really is simple. I was trying to make it hard. Maybe you are too.
Try keeping the atomiser hole pointing downwards at all times - unless you feel or see it flooding - then turn it 180 degrees so it's facing upwards for a few puffs.
How do I know if it is flooding if I can't see inside a closed system..... I thought I pointed the hole down to fill it, do you mean I got it backwards...... I been vaping with the hole pinting up and filling it with the hole pointing down...... And I got the tank filled 3/4 full...... I watched Imeo's video's over and over...... Thank you so much for your help...... You people, the GG Family are so nice......
- Status
