AFS feedbacks

[vapn]

Yes I am doing that now and it is working just fine. Back to normal. Thanks imeo for the help.

Did I say normal.. I meant to say terrific. Super big vapor production. More than I ever got from the 901. This is more like the 801 at 6v and I am only using the 3.7v 18650.

 

[moog]

Moog one question please my friend.

I saw a post and you were saying that you saw the hole of atomizer. You saw it from inside or outside the atomizer? If you saw it from inside, then AFS should work properly. If you saw it from outside only, then its blind

I could only see it from the outside....

 

[Zaibach333]

well I've had the AFS for two days now and I've used it quite a bit. it works great for over half-full and thinned just a little bit with pg because the hole wont take extra thick vg. my GGT puts the hole of the atty at 9 oclock instead of 6 so I'm able to use the really long two air gap cartridge with the length trimmed a little and position it so one of the side holes is open to the hole in the atty (I find that it takes less air to get liquid to the atty with this cartridge). overall the device is great for what it's made for. I prefer 6V personally so I have to turn it to hole facing down and take in some puffs every several vape inhales. I love it

the videos aren't up anymore but just watching these helped me out for handling the AFS as it was for the beta testing afs models.

YouTube - AFS 1

just click the link to get the other two parts under "more from: SakisGoldenGreek"

 

[imeothanasis]

Yes I am doing that now and it is working just fine. Back to normal. Thanks imeo for the help.

Did I say normal.. I meant to say terrific. Super big vapor production. More than I ever got from the 901. This is more like the 801 at 6v and I am only using the 3.7v 18650.

nice vapn, I am happy!!

 

[imeothanasis]

I could only see it from the outside....

ok, bad luck moog, sorry my friend

 

[imeothanasis]

well I've had the AFS for two days now and I've used it quite a bit. it works great for over half-full and thinned just a little bit with pg because the hole wont take extra thick vg. my GGT puts the hole of the atty at 9 oclock instead of 6 so I'm able to use the really long two air gap cartridge with the length trimmed a little and position it so one of the side holes is open to the hole in the atty (I find that it takes less air to get liquid to the atty with this cartridge). overall the device is great for what it's made for. I prefer 6V personally so I have to turn it to hole facing down and take in some puffs every several vape inhales. I love it

the videos aren't up anymore but just watching these helped me out for handling the AFS as it was for the beta testing afs models.

YouTube - AFS 1

just click the link to get the other two parts under "more from: SakisGoldenGreek"

thank you very much for the link Zai, I delete them by accident but I post them again in a new thread.
Very very useful info Zai!!! thanks a lot

 

[Stormynights]

OK Today I am having flooding troubles... I seem to be getting too much juice in the atty... I was doing great last night but today it is a different story. I changed batts and that was not it. I think the atty is just getting weak already. I was really giving it a work out last night. I don't think it is keep up with the AFS today. I am thinking of going with 5v on the Prodigy to see if I can wake it up... I am scared to go with 6v in fear of blowing it... And as Lisa knows that is a heart breaking situation. imeo we need more atties...

I am having the same problem. My addy is constantly gurgling. Maybe our holes aren't all the same size. I haven't had any leaking even with it thrown in my purse. I used it at 6 V. I think if it didn't flood I would just love it. I have dumped 3 tanks of liquid in my lap though. I am very clumsy. I am looking forward to the new additions. I am at the library now. My phone service is down at home. I hope they get it fixed before the weekend.

 

[imeothanasis]

I am having the same problem. My addy is constantly gurgling. Maybe our holes aren't all the same size. I haven't had any leaking even with it thrown in my purse. I used it at 6 V. I think if it didn't flood I would just love it. I have dumped 3 tanks of liquid in my lap though. I am very clumsy. I am looking forward to the new additions. I am at the library now. My phone service is down at home. I hope they get it fixed before the weekend.

if you see this noise, it means that atty is overfilled as you already know stormy, so please turn GG 180 degress, so the atty's hole looking up and smoke until noise stops. Then, turn it again with hole down. Please do it and tell me your results

 

[ggero]

Hei guys !..I want to say about a difference I noticed while using these two mouth pieces (m/p) ...As you can see at the pict1, we have a m/p at the left which has two parts..The black and the brown...At the right we have another one which is the default cap for protecting a new atty...

I am using the right m/p and the inhale is very soft while a lot of smoke coming into my mouth..I tried to use the left one m/p (of course without the brown part) and while logically it seems to works better, the result was not good..I had to inhale hard to get the 1/5 of smoke compared with the right one

Also I noticed (as you can see at the pict2) that the long m/p at the bottom has two "D" figures..If you center this "D" figure at the same line of the hole in the atty you will have a great result..The liquid flows smoothly from the AFS into the atty and the result is brilliant..

pict1 :

pict2 :

 

[vapn]

I'll try it. Thanks for the tip. I will report back with my opinions.

Now if I can find those. I remember getting some with a few new atties a while back...

 

[Lisaf01]

Those are both RN4075 carts and excellent explanation and pics George.

Now, who is using an original 901 cart or any other type with the AFS?

 

[vapn]

I just tried that cart and got a load of juice in my mouth... YUK... I will be using my J118 again. That was a lot of juice too.. I hope I don't die... Poison you know? I want one of those new deals that imeo made...

 

[Lisaf01]

I just tried that cart and got a load of juice in my mouth... YUK... I will be using my J118 again. That was a lot of juice too.. I hope I don't die... Poison you know? I want one of those new deals that imeo made...

Which one did this and can you post us a pic of the J118 cart?

 

[abhowe]

Does the J118 cartridge work good with the AFS..... If so, where do you buy them please......

 

[moog]

I just tried that cart and got a load of juice in my mouth... YUK... I will be using my J118 again. That was a lot of juice too.. I hope I don't die... Poison you know? I want one of those new deals that imeo made...

I think those carts cover up the hole....

 

[Lisaf01]

OK, does anyone else think it would be a good idea if one or more of us could gather up every single type of 901/4075/118 cart we know of and make sure Imeo has a few of each individual type for his testing purposes?

 

[vapn]

I got a bunch of them a long time ago.. They are for the V5 J118. It is a knock off of the 901. They fit pretty tight but they are kinda softer than these RN hard plastic mouthpieces. I use them for my 510s also.

Hope this helps y'all.

 

[vapn]

I think those carts cover up the hole....

Nope... the center filler part can be pulled out just as the brown type can. But they seem to fit better.

Yea I think I have one of each type made. And this is the one I keep going back to. Just the mouthpiece anyway.

 

[vapn]

imeo, I had a thought, how about a clear acrylic material for the AFS so we can see what is going on with the juice without taking the cap off? Could you machine something clear plastic? Something to think about anyway.

 

[womblebat]

AFS is now repaired, i just swapped the top and bottom "o" rings, not a single leak

Great idea on the acrylic tank vapn