Youtube is processing those videos, please wait a little guys
YouTube - afs final video 1
YouTube - afs final video-2.avi
YouTube - afs final video 1
YouTube - afs final video-2.avi
AFS final videos
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
Hahaha, the hair comment and then the look on your face cracked me up!!! I laughed so hard!!!!
Looks like that new cartridge is going to be the be all and end all solution to stopping the liquid in the mouth issue.
Lots of good hints and tips in these videos.
Go Boston!!!!!
Looks like that new cartridge is going to be the be all and end all solution to stopping the liquid in the mouth issue.
Lots of good hints and tips in these videos.
Go Boston!!!!!
Last edited:
Imeo, Great videos man!!! You really dedicate your time and thoughts to come out with all the goodies~ Can't wait till those new cartridges come out as well!!! Awsome!
I think these need to be added to the main site imeo... lots of useful info in these two videos. Thanks for showing us how to take those tiny inhales to get liquid with the Control ring closed. I was doing it all wrong at first.
Boom, noone will complain about my hair again!!!!!
Thanks a lot keon my friend!
Vapn, yes, I wanted to make this video long ago because I had notice that I had to answer to some questions and I couldnt answer properly but only with a video.
I want to say something else for people that maybe have a little more overflooding than normal when they smoke or they have drops on their shirts like one friend said on forum. The trick is this: Put off the o-ring that is around the small cap and screw tight the small cap on the big cap. That way the o-ring between the 2 caps will be totally seal the atomizer.
Thanks a lot keon my friend!
Vapn, yes, I wanted to make this video long ago because I had notice that I had to answer to some questions and I couldnt answer properly but only with a video.
I want to say something else for people that maybe have a little more overflooding than normal when they smoke or they have drops on their shirts like one friend said on forum. The trick is this: Put off the o-ring that is around the small cap and screw tight the small cap on the big cap. That way the o-ring between the 2 caps will be totally seal the atomizer.
Boom, noone will complain about my hair again!!!!!
Thanks a lot keon my friend!
Vapn, yes, I wanted to make this video long ago because I had notice that I had to answer to some questions and I couldnt answer properly but only with a video.
I want to say something else for people that maybe have a little more overflooding than normal when they smoke or they have drops on their shirts like one friend said on forum. The trick is this: Put off the o-ring that is around the small cap and screw tight the small cap on the big cap. That way the o-ring between the 2 caps will be totally seal the atomizer.
BINGO!!!!!!! I can take those short puffs now without flooding it imeo... I knew I had some sort of air leak and this just fixed it. When I was trying to take those two short quick puffs to get juice I would get a massive amount of juice... Plus the flow has slowed down quite a bit without this air getting in the system.... My finger is firmly on the top of the straw now Thank you for this tiny little tip... how important it was.
ps. let me clarify what I said about my finger on top of the straw.... the AFS is like holding a 6ml bottle of juice inside a straw... keep your finger on the top and you can hold the juice inside the straw, we are trying to get a tiny bit of juice to come out of the AFS with each puff right... If you have your finger only partially on top of the straw what happens... juice runs out fast way too fast to vape it, I don't want everyone to thing they have to crank down on their AFS to keep it tight.. but yes take this oring off the top cap and see if it make the huge difference mine did... I hope it does.
Last edited:
Good video Imeo. We need to get you a camera with a higher FPS rating though so it isn't so jerky. What model camera do you have?
I have a logitech Rob and its a very good one at higher resolutions (1,3 MP) but makes a very heavy video so I cant upload it very quick on youtube. When I make long lasting videos I use 720x576 analysis and for smaller ones I use 1,3 MP.
Ok,
received the AFS, atties and some other goodies, thank you Lisa again for the great service!!!
I cleaned the AFS, installed it like Imeo showed on the video, including removal of the o-ring that is around the small top cap.
1.) It looks beautiful, what a craftsmanship, the design, the finish: perfect!!!
2.) on the TS it looks like it is going to take of like a rocket ;-)
3.) The taste of the juice is perfect (i-3 on 3.7V and i-6 on 6V)
4.) Vapor production is beautiful
5.) First hits: juice in my mouth, after that working fine
6.) some leakage around the adjustment ring, not a lot but some drops first minute
7.) ordered the new mouthpiece, wait for another week to arrive :-(
8.) Imeo: you did it again, love it so far and know it will become better every minute!!!
9.) with the i-6 on 6V......that is what a GG junky needs!!!!
10.) i-7....this evening, first enjoy the i-6......
11.) goodbye dripping!!!!!!
received the AFS, atties and some other goodies, thank you Lisa again for the great service!!!
I cleaned the AFS, installed it like Imeo showed on the video, including removal of the o-ring that is around the small top cap.
1.) It looks beautiful, what a craftsmanship, the design, the finish: perfect!!!
2.) on the TS it looks like it is going to take of like a rocket ;-)
3.) The taste of the juice is perfect (i-3 on 3.7V and i-6 on 6V)
4.) Vapor production is beautiful
5.) First hits: juice in my mouth, after that working fine
6.) some leakage around the adjustment ring, not a lot but some drops first minute
7.) ordered the new mouthpiece, wait for another week to arrive :-(
8.) Imeo: you did it again, love it so far and know it will become better every minute!!!
9.) with the i-6 on 6V......that is what a GG junky needs!!!!
10.) i-7....this evening, first enjoy the i-6......
11.) goodbye dripping!!!!!!
Last edited:
"Hi, this is Imeo. Sorry about the delays to the AFS and the hair, I was taking care of some obligations...."
<cut to Imeo with helmet in the front row of a phalanx, pulling out a ggts with afs and holding that over his shield while the two guys on either side turn and look at him>
"....but everything turned out alright. Except I have hurt my back, and have a spear tip in my shoulder."
<cut to Imeo with helmet in the front row of a phalanx, pulling out a ggts with afs and holding that over his shield while the two guys on either side turn and look at him>
"....but everything turned out alright. Except I have hurt my back, and have a spear tip in my shoulder."
"Hi, this is Imeo. Sorry about the delays to the AFS and the hair, I was taking care of some obligations...."
<cut to Imeo with helmet in the front row of a phalanx, pulling out a ggts with afs and holding that over his shield while the two guys on either side turn and look at him>
"....but everything turned out alright. Except I have hurt my back, and have a spear tip in my shoulder."
You are a writer buddy!!
I can't put it down, it totally rocks!!!!
one question: the control ring all the way down or up and leaving a small gap does not make any difference....
one question: the control ring all the way down or up and leaving a small gap does not make any difference....
Not a big diference friend. Better to keep only the small gap. The CR shows the differencem in draw after you have already cover the holes.
I am very pleased that you liked the AFS friend. You are one of the dificult customers I mention before!!!
difficult??? there is only one person difficult on this forum and that is the one who just got a haircut!
Maybe I am a little Emonty. I like perfection and details so much that sometimes my friends get bored of me
. I like perfection and details so much that sometimes my friends get bored of me
Maybe I am a little Emonty
then I am not your friend!!
- Status
