We'll get them figured out, step by step, so long as you guys just keep answering the questions. 
Thanks,
Debbie
Thanks,
Debbie
AFS Prime
- Thread starter harpo
- Start date
- th_trl_thread_readers 0
- Status
Yes of course, thanks for the help and I am trying to do the same here. I just say what will come next so they have to know that they will not have any problem from now on.
I am trying to make better products. I try to satisfy the most dificult customers , so I try to make improvements
Small pieces of metal are inside the laser hole so it seems closed. It has to be opened by blowing or sucking air, thats all.
I am one of your biggest pain in the ... customer 8-o and you satisfied me!!!
We'll get them figured out, step by step, so long as you guys just keep answering the questions.
Thanks,
Debbie
We are working on a good user manual kind of thing right now. Hopefully it will answer all the FAQs and help new AFS customers out. The next version of the AFS should be a lot better and much easier to use. Remember we are only in the 4th month of using this product. I still learn something new about it every now and then. It still beats dripping hands down..... any day!!... even with the problems with it I still would not be without it anymore.
I am one of your biggest pain in the ... customer 8-o and you satisfied me!!!
Thanks friend, I will remember that!!!!
I want to thank all of you for your help. I don't have a working atty so I'm dead in the water at this point until I receive more. Again thanks everyone for the help.
I'm going to buy a few new carts for this, as my 510's are loose. Which would you recommend I look for, 901 or 4075?
Debbie
Debbie
sorry yo hear that my friend, I know how you feel (I had my frustrations), but I promise you and know 4sure that it will be solved. You will look back soon and think: holy s^^t the GG is all I want/need/desire/use. Take care and see you back soon....!!!!
Your new atty's will get to you quick, Harpo. And then you'll be back in business again.
I'm sure I'll still be here, still trying to figure it all out.
Debbie
I'm sure I'll still be here, still trying to figure it all out.
Debbie
To all GG users:
I always try to make improvements, thats my job. If I stop this then we will not have always better products. I want to remind to all of you that I made a new AFS that is not complex at all, it doesnt leak, it has no learning curve, no laser holes and still automatic without having to push buttons to bring liquid inside atty. Also its more beautiful.
We all appreciate and admire your constant desire for THE ultimate e-cig.
We've got to make sure existing customers are all happy, as well as new AFS customers who will use the standard AFS rather than the new improved GGTS AFS that you are producing.
I poked a needle into the burn spot on my 4 extra attys, just in case. I couldn't get the needle in, barely if at all, and wondered if I needed smaller needles.
And then I used a large flashlight and locked myself in the bathroom (hubby thinks I'm crazy
I'll check the one in the AFS when I take it apart again.
Debbie
Yep, not surprised that the needle didn't actually come through, just the very sharp point is all you'll ever get through these holes, they are much much smaller than the thickness of a human hair.
Sorry if we sounded rather dismissive, it's just we all couldn't believe that there were actually holes in these atties at all when we first received them. We must have given Imeo a BIG headache in those first weeks.
Hopefully your replacements will arrive soon (and if you send those ones back to Rob and he discovers they are indeed blind, Imeo will replace them, I am sure.)
4075 with the brown inner part taken out, or 901 with the inner bit cut down a little should work equally well.
Your new atty's will get to you quick, Harpo. And then you'll be back in business again.
I'm sure I'll still be here, still trying to figure it all out.
Debbie
Once you get the hang of it, there really is no going back to dripping. I have about 20 different varieties of excelent HV 901s and 510s here that I obtained for my own testing purposes and I am just NOT using them because they aren't AFS ones!!! I just cannot bring myself to use them because it means dripping again............
THis is for GGTS users.... GGT users no need to read this unless you have air hole on back cap threads....
well I started to run into some problems yesturday with my AFS. For some reason the air hole on the 901 kept on leeking and I ended up blowing an attie. Then it hit me. no matter how I adjusted the AFS air kept on hitting the 901 air hole which kepted pushing more air into the attie wich caused it to dump more liquid in the attie....hince the flooding.
So i hit up wally world and got some o-rings. I put the first o-ring .5 mm above the 901 air hole. Then i put the bottem half of the AFS together. Once thats done I take an aditional o-ring and put it on the attie (thread side and push it up until its flushed with the AFS....no more air can hit the 901 air hole. After that assemble the rest of the AFS and you should be okay. THere will be a bigger gap.
Oh one other thing you dont have to put the o-ring on the attie to block air hole you can also put it on the GGTS cap threads, just makes sure it blocks air hole.
well I started to run into some problems yesturday with my AFS. For some reason the air hole on the 901 kept on leeking and I ended up blowing an attie. Then it hit me. no matter how I adjusted the AFS air kept on hitting the 901 air hole which kepted pushing more air into the attie wich caused it to dump more liquid in the attie....hince the flooding.
So i hit up wally world and got some o-rings. I put the first o-ring .5 mm above the 901 air hole. Then i put the bottem half of the AFS together. Once thats done I take an aditional o-ring and put it on the attie (thread side and push it up until its flushed with the AFS....no more air can hit the 901 air hole. After that assemble the rest of the AFS and you should be okay. THere will be a bigger gap.
Oh one other thing you dont have to put the o-ring on the attie to block air hole you can also put it on the GGTS cap threads, just makes sure it blocks air hole.
Last edited:
well I dont know if that is safe.... the o-ring seemed to be an easy way to do it.
HEy vapen the size of the O-ring is just a hair smaller than the ones that came with the AFS. I'm still having issues with 2 other atties but I think the lazer hole is to big maybe it missfired or something. Because the one I'm using now is working perfect... I mean huge fumes of vaper that would give Yellowstone National Park a run for its money......lol sorry just couldnt help myself....
I'm thinking what may cure the flooding is the 5v passthrough for the GGTS. More votage just may be enough to give that juice no chance to flood the attie.
Crap ROb is out of the PT's.... crap
Crap ROb is out of the PT's.... crap
Last edited:
Yea I am loving this Pass thru man... it is just the ticket for the AFS. If you have CR2s they are just what I was using to cure the flooding problem. The juice gets used up fast enough to keep up with the AFS feeding. We could use that adjustable draw thing now.
I'll wait for AFS V2, 100% sure Imeo will make that one leak and fool proof!!!
Is anyone beta-testing the new AFS? Does it offer a bigger throat hit in addition to the ease of use?
New AFS is something that you cant imagine friend.
No leakage, no flooding problems, no learning curve, no need to see where the laser hole is.
- Status
