Ahlusion LLC Chat Thread

Status
Not open for further replies.

LouisLeBeau

Shenaniganery Jedi! Too naughty for Sin Bin
ECF Veteran
Jul 23, 2013
14,099
43,300
I love Saturday Morning! I mix it with something else most of the time
Sweet Strawberry mostly. Might have to get it sweetened next.
Joining in from hospital the day after surgery!

Sent from my SM-G550T using Tapatalk

Well, aren't YOU fiesty?! You go easy on that knee even if the doc is AWESOME. I hope the pain is manageable and your therapy goes well, Coco!

When I got my hip replacement, I was talking to a guy in rehab that was knee. Apparently the recovery takes a bit longer. I was on my feet an hour after waking from the procedure, walking that afternoon, and out 24 hours after surgery. Then I thought I was superman, and I'm getting about due to have the cup replaced already I think. It hurts again, not like the first at all, but still annoying.
 

chanelvaps

ECF Guru
ECF Veteran
Verified Member
Oct 3, 2013
16,059
85,416
Burbank CAlifornia
LLB... I am up walking the halls to show them I am good to. Did my physical therapy twice hoping to be out of here. I have to admit the pain pills are doing their job and have me feeling fine. I usually deny myself this kind of meds due to the addiction potential but they are mandatory for the next week or two and I would rather be home having fun

Sent from my SM-G550T using Tapatalk
 

daniele25

Ultra Member
ECF Veteran
Verified Member
Feb 18, 2012
2,728
3,525
phoenix
Well - it happened again. The new coil i put in the Crown last night now has some burnt hits and giving hardly any flavor. So that's not even 24 hours of decent use. I've taken a pin and poked through the cotton in the juice holes, that helps for 5 minutes and then back to crap. Idk what is going on - literally the same ordeal with every single tank and coil lately. Getting very frustrated.
 

LouisLeBeau

Shenaniganery Jedi! Too naughty for Sin Bin
ECF Veteran
Jul 23, 2013
14,099
43,300
LLB I know you enjoy vaping at higher watts these days. Do you vape AHL like this. What ratio do you get?
Sent from my SM-G550T using Tapatalk

Not so much higher watts, but Stainless Steel, which has such low resistance that you just HAVE to go higher with the power. But then you have the option of temp control no matter what you put on top if you are sure they are all stainless. I do 70vg/30pg @ 6mg now. I had dropped to 3, but it was taking too long to get.. saturated.. again after long breaks (like on the Motorcycle). I definitely vape less ml @6mg than @3. I don't get OFF the thing at 3mg. ;)

Well - it happened again. The new coil i put in the Crown last night now has some burnt hits and giving hardly any flavor. So that's not even 24 hours of decent use. I've taken a pin and poked through the cotton in the juice holes, that helps for 5 minutes and then back to crap. Idk what is going on - literally the same ordeal with every single tank and coil lately. Getting very frustrated.

You are definitely having juice flow issues by the sounds of it. The Crown coil, very oddly, likes to be primed with max VG, and then to be run on no less than 70% VG in my experience. Counter-intuitive, I know, but it seems to wick the THICKER juices FASTER. Or maybe what is really going on, is that the thicker juices are better at capillary action against gravity, where the thinner juices don't travel up into the top of the wicking as well, thus burning there? Always best to pick one variable at a time. Are you sure that your coils are authentic Uwell? I know some have had an issue with that as well.
 

chanelvaps

ECF Guru
ECF Veteran
Verified Member
Oct 3, 2013
16,059
85,416
Burbank CAlifornia
Well - it happened again. The new coil i put in the Crown last night now has some burnt hits and giving hardly any flavor. So that's not even 24 hours of decent use. I've taken a pin and poked through the cotton in the juice holes, that helps for 5 minutes and then back to crap. Idk what is going on - literally the same ordeal with every single tank and coil lately. Getting very frustrated.
Are you vaping high VG juice? I am new to the convo and you did not say what juice you are vaping
 

chanelvaps

ECF Guru
ECF Veteran
Verified Member
Oct 3, 2013
16,059
85,416
Burbank CAlifornia
Not so much higher watts, but Stainless Steel, which has such low resistance that you just HAVE to go higher with the power. But then you have the option of temp control no matter what you put on top if you are sure they are all stainless. I do 70vg/30pg @ 6mg now. I had dropped to 3, but it was taking too long to get.. saturated.. again after long breaks (like on the Motorcycle). I definitely vape less ml @6mg than @3. I don't get OFF the thing at 3mg. ;)
Somebody gave me a couple of packs of SS coils for Subtank Mini and I did not know how to use them. Do I have to use a TC mod and set it to tEmp control?
 

LouisLeBeau

Shenaniganery Jedi! Too naughty for Sin Bin
ECF Veteran
Jul 23, 2013
14,099
43,300
Somebody gave me a couple of packs of SS coils for Subtank Mini and I did not know how to use them. Do I have to use a TC mod and set it to tEmp control?

Nope, that's one of the beautiful things about Stainless 316L. It works great in power mode (watts) also, and is safe to dry burn, as long as you don't get it BRIGHT red hot. Titanium and Nickle, if you ever get those ANY color of red, they're no longer safe to use. And that can happen just forgetting the coil is Ti or Ni and then using it in power mode. Why risk that?
 

Mr.Mann

ECF Guru
ECF Veteran
Verified Member
Dec 30, 2011
17,401
40,572
48
All over the place
I love Saturday Morning! I mix it with something else most of the time
Sweet Strawberry mostly. Might have to get it sweetened next.
Joining in from hospital the day after surgery!

Sent from my SM-G550T using Tapatalk

Speaking of mixing...

Halo has a new flavor called Toasted Reserve that will take damned near any fruit vape and make it into a baked dessert taste. Hell, I add it to tobaks too! Good stuff.
 

Mr.Mann

ECF Guru
ECF Veteran
Verified Member
Dec 30, 2011
17,401
40,572
48
All over the place
Are you vaping high VG juice? I am new to the convo and you did not say what juice you are vaping

A lot of times, these coils out now have to be hit with a certain draw speed or the coils kinda fry themselves. If you have a cloud-chuckin' device, make sure you hit it as such.

I don't know if that was mentioned yet. Good luck, D25.
 

daniele25

Ultra Member
ECF Veteran
Verified Member
Feb 18, 2012
2,728
3,525
phoenix
Interesting on both tips, thank you guys! And yeah - most of the juices I've got in rotation are pretty high VG and all very sweet flavors. I went to a local shop today to get a less sweet and more "coil friendly" juice to see how that goes until my Ahlusion juices get here. Threw a new Triton Clapton coil in my super Tank Mini to just start fresh with something and will see what happens. Fingers crossed.

And yum! I'm into any baked dessert vape (or food)! lol That actually reminded me of this cinnamon roll juice I get from time to time, and if you take a vape after eating a couple of skittles, it literally tastes exactly like the best bowl of apple jacks cereal you've ever had. Lol! I found that out by accident of course, but then made a little habit out of it since it was so darn good. I'll have to give it a try with Drewdles to see if it does the same thing.
 

LouisLeBeau

Shenaniganery Jedi! Too naughty for Sin Bin
ECF Veteran
Jul 23, 2013
14,099
43,300
A lot of times, these coils out now have to be hit with a certain draw speed or the coils kinda fry themselves. If you have a cloud-chuckin' device, make sure you hit it as such.

I don't know if that was mentioned yet. Good luck, D25.

Exquisite point, Mr. Mann. The crown feeds by negative pressure, and a low, slow draw might not be enough to create the pressure necessary to really pull in the juice. Daniele, you know what to do. ;)
 

PennyLynn

Ultra Member
ECF Veteran
Jan 28, 2014
1,301
5,430
74
Rockledge, FL, USA
LLB... I am up walking the halls to show them I am good to. Did my physical therapy twice hoping to be out of here. I have to admit the pain pills are doing their job and have me feeling fine. I usually deny myself this kind of meds due to the addiction potential but they are mandatory for the next week or two and I would rather be home having fun

Sent from my SM-G550T using Tapatalk

You go, Chanel! I took a walk around the hospital floor the evening I had my surgery done (not knee), and I also took the pain meds. They really do help, and you'll know when to switch to OTC meds. It really feels good to get back home after spending time there. Best wishes for a rapid recovery!
 

daniele25

Ultra Member
ECF Veteran
Verified Member
Feb 18, 2012
2,728
3,525
phoenix
So i decided to look into something tonight to see if this recent issue with every coil I try could somehow be related to my mod...especially since it only started happening very recently, and its been regardless of which tank/coil, or what juice I'm using. I started to wonder if as my mod has gotten older, if it is somehow maybe putting out more power than I think it is, and frying my coils faster. (No idea if this is even a reasonable thought process or not, but I went with it). Lol. And unfortunately, I just last weekend gave away my only other mod that was powerful enough for these tanks I've been using, so haven't been able to try out another mod to see if that helped. So i decided to check a couple ohms law calculators online. When i enter the ohms and wattage to calculate volts, every calculator I tried is about .8 volts lower than what my mod is reading. Is that a normal range of inaccuracy for a mod, or is that significant enough to be an issue? Now, what I don't know, is if this is a new thing with my mod, or if it would have always shown higher volts than what the calculators are saying, because I never looked into it before. This could be a crazy far fetched theory with nothing to it....because even for as long as I have been vaping, I never really became all that smart on the ohms/watts, etc. front... Lol. So feel free to tell me if I'm just totally off base on this one. I won't be offended. Lol :)
 

Jumpin' In...

Ultra Member
ECF Veteran
Sep 11, 2013
1,920
5,210
Maui, Hawaii
So are you guys all emailing a cc of your photo ID to Ahlusion? I've tried some other juices recently because of Ahlusion website snafus. I miss the Ahl's 50/50 ratio and I wanna go back - but now the site says "No ID No Sale". :(

I wish they'd done one of the services. Already registered for both of the main ones.
 

Jingles

Ultra Member
ECF Veteran
Verified Member
Jul 18, 2011
2,503
9,908
Ohio
I was worried about the photo ID thing a couple of weeks ago when I placed my last order. My order billed and shipped just like normal. Maybe because I am a long-time customer. I don't think I was 13 years old four years ago when I started ordering from Ahlusion, with a credit card in my name. Now I am only 17, still underage...in my dreams. Ha! Ha! Anyways, I encourage you to place an order and see what happens.


Sent from my iPhone using Tapatalk
 

PennyLynn

Ultra Member
ECF Veteran
Jan 28, 2014
1,301
5,430
74
Rockledge, FL, USA
I want to wish all my Ahlusion buddies who celebrate a Merry Christmas. Me, I'll be frying up latkes tonight and lighting a couple of candles (now where were those matches?). Great weekend to everyone who celebrates Solstice, Kwaanza, or Festivus, too!
I'm feeling pretty good these days and looking forward a few months to completing my treatment. I have some hair, almost enough to look like a style. We're still trying to figure out why my right hip hurts and makes walking unpleasant; I thought it was caused by Herceptin, but my doctor ordered an X-ray (nothing) and a full-body bone scan. I'm going to visit my chiropractor next week; I have a feeling that might help a lot (haven't gone since February, when all this cancer stuff started).
Party on and Vape if you got 'em!
 

Sirius

Star Puppy
Supporting Member
ECF Veteran
Verified Member
Nov 19, 2013
18,632
76,259
North Carolina
Merry Christmas Ahlusion LLC Chat Thread!
Wishing you all a happy and blessed New Year as well. :wub:

o-CHRISTMAS-DOG-FOOD-570.jpg
 
Status
Not open for further replies.

Users who are viewing this thread