- Status
Slopes, the magic eye mod is close, but still needs your finger. What is your avatar? Looks like an evil legoman 
Thank you sir. Your personal attention to each and everyone of us is commendable. You seem to be truly a great guy. I forgot to mention, if you find yourself in NC, I got a spare room, steak and whatever brew ya want.
Well I still don't have the mesh in yet, but I did get a somewhat working model. I made up a quick tea bag wick to drip onto.
The taste is sure different than with my other mods. (not bad, just different, very thick taste) not a lot of vapor. nothing at all on the exhale. I must have a ton of vapor on the exhale. Nothing else will do. I also can't seen to find the menthol flavor in my juice with the tea bag wick. It was there with the same juice when I used tea bags for cart filler, before I started dripping.
So I will have to wait for the mesh to see if I do like it.
The taste is sure different than with my other mods. (not bad, just different, very thick taste) not a lot of vapor. nothing at all on the exhale. I must have a ton of vapor on the exhale. Nothing else will do. I also can't seen to find the menthol flavor in my juice with the tea bag wick. It was there with the same juice when I used tea bags for cart filler, before I started dripping.
So I will have to wait for the mesh to see if I do like it.
Yes, it was one of my first mod. It works, but i prefer manual "smoking".
It starts, when the mouthpiece contacts the lips. It does not look well, it was for test only.
Last edited:
Hooray, found the kanthal. Presta Shop - Kanthal D - 0.20 mm - 43.8 ohm/m - 10 m Not in the US, though.
My plans are in place. As soon as I get the goodies, I should be set to make a horribly ugly parody of raidy's wonderful concepts.
I wonder, raidy, what other industries you've casually revolutionized in your free time?
My plans are in place. As soon as I get the goodies, I should be set to make a horribly ugly parody of raidy's wonderful concepts.
I wonder, raidy, what other industries you've casually revolutionized in your free time?
Mentat, no offense, but you might want to search further, that stock looks pre-war almost. Salvaged from the warehouse flood or I dunno what. Labels are even typed.
Want buy Kanthal ?
Look here: price o.k. shipping us. o.k.
0.16mm:
Kanthal D - 0,16 mm, 10 m, Draht Heizdraht - 66,9 ohm/m bei eBay.de: Connectors, Switches Wire (endet 06.12.10 12:04:08 MEZ)
0.2mm
http://cgi.ebay.de/Kanthal-D-0-20-m...327?pt=LH_DefaultDomain_0&hash=item41529fdb57
I know him, he is a fair seller. I also bougth from him a year ago.
He has a own store: www.buymywire.com
Look here: price o.k. shipping us. o.k.
0.16mm:
Kanthal D - 0,16 mm, 10 m, Draht Heizdraht - 66,9 ohm/m bei eBay.de: Connectors, Switches Wire (endet 06.12.10 12:04:08 MEZ)
0.2mm
http://cgi.ebay.de/Kanthal-D-0-20-m...327?pt=LH_DefaultDomain_0&hash=item41529fdb57
I know him, he is a fair seller. I also bougth from him a year ago.
He has a own store: www.buymywire.com
Last edited:
simply awesome Raidy.
I finished my "greeny Genesis" yesterday with the parts from Bulli. Taste is awesome.
Now i have to seal everything
Jens
I finished my "greeny Genesis" yesterday with the parts from Bulli. Taste is awesome.
Now i have to seal everything
Jens
Wow, you are realy fast. Want see pictures, want read a report.
Yes, the taste of genisis atty is a own class
raidy, they are just the usual parts that everyone used. so i want to try and oiptimize little bit.
Did you try to use ic contacts directly in the middle part?
i got the parts from bulli with the 3 big holes. will make the holes smaller and cast new parts
Did you try to use ic contacts directly in the middle part?
i got the parts from bulli with the 3 big holes. will make the holes smaller and cast new parts
Great work! Make it to Louisville, Kentucky and I'll take you out for KFC Buffet... yes, it exists.
This thread is so fun to read--and I don't understand ANY of it! On your grand tour of USA, Raidy, you're welcome at my place in Idaho! Potatoes! http://www.lastresortvacation.com
I'm excited to buy one of your atomizers in about a year when you've got the patent and a manufacturer. Don't forget to tell us where to go to make the purchase....
I'm excited to buy one of your atomizers in about a year when you've got the patent and a manufacturer. Don't forget to tell us where to go to make the purchase....
Hey, I had a girlfriend in Sandpoint and used to snowboard at Schweizer, all long ago. Very beautiful area, made it out to Harrison, ID this summer to show my family even. Your cabin is booked very well come December.
raidy, you'd like the fishing!
Last edited:
What is your avatar? Looks like an evil legoman
It's the ceramic cup from an M Series atty
He looks like I feel quite often when trying to make mods!! 
I've been taking the time to read through this entire thread for a while now. This stuff is just light years ahead of anything I've seen elsewhere and just makes everything out there look like toy's in comparison. Wish I was more savy enough to build something like this, but alas I am not. I as well look forward to a time when I can purchase something of this sort from somewhere. But until that time, I greatly appreciate all the work that goes into these. And just seeing them for now is awesome.
So I still don't have the SS mesh but I'm sure someone will like to see it this far.
I went and got some oak to make the cigar sleeve for it.
The clear top part is just temporary but it has variable air flow to adjust the draw back pressure.
I went and got some oak to make the cigar sleeve for it.
The clear top part is just temporary but it has variable air flow to adjust the draw back pressure.
Last edited:
Wow, i'm amazed. Looks realy good. But you need longer wire.It must not glow. If the throat hit is to strong, use not so much fiber and a longer wire.
Wow!
Last edited:
- Status
Similar threads
- Locked
