All my mods part1

[peaceoffcake]

Hey Peace, please tell me what material has you used to build the cristal tubes and the fume top cap... ?

And another thing, with what element are you sealed the battery conector into the bottom aluminum part ? with epoxy glue ?

Thx.

I use aluminium and plexiglas.
Epoxy.

 

[dsy5]

No lathe is needed to make a perfectly functioning atty.

Are you talking about a Genesis - LV? I mean a threaded version like the one ichbines posted. Make one and let us see.

I know, you could use a drill press and a bottoming bit, but it would be tough for the intermediate piece and the finish would probably look like crap. Besides I would want to use stainless.

 

[Gummy Bear]

You will notice that WillyB said "No lathe is needed to make a perfectly functioning atty"

He didn't say a "Good looking" one. You must have one, that's it, you must, you must,,,, Now there's your excuse, Go get it.
You know you want one. (can I borrow it)

 

[Persis]

I use aluminium and plexiglas.
Epoxy.

Thankyou for answer peace, and how PMMA Plexiglas resists the scratches ??? I read on the web that scratch easily, I hope it not.

 

[Persis]

Hi, I'm back
but tired after 36h of driving,flying,waiting.
Wow, a lot happens here in this thread, i first have to read hundrets of posts.
But now i go sleeping. I'm soooooooooooo tired.
What a wheather shock: From 36° to -5° (97F to 23F), and snow everywhere here in Germany.

Greetings Raidy

You are very very very welcome.....!!!

I hope that your holidays were pleasant.

YEEAAHHHH... The vapor wizard has returned...!!!!!

 

[peaceoffcake]

Thankyou for answer peace, and how PMMA Plexiglas resists the scratches ??? I read on the web that scratch easily, I hope it not.

Your welcome. Not so gently as he look. I use my atty last three weeks and is still look like new.

 

[dsy5]

You will notice that WillyB said "No lathe is needed to make a perfectly functioning atty"

He didn't say a "Good looking" one. You must have one, that's it, you must, you must,,,, Now there's your excuse, Go get it.
You know you want one. (can I borrow it)

You are sooo right, Gummy! I have a couple of brands in mind that look good. Maybe after the New Year...

But at an average weight of around 450- 550 lbs for a midi size lathe, you're gonna hafta come and pick it up, if you want to use it!

 

[traderdan]

Welcome back Raidy
Everyone been waiting to hear from you ,how about the vacation . See anything good for modding ? Hope to see more posts soon rest up read up.
Dan

 

[dsy5]

Welcome back, Raidy! You're thread has been very inspiring. Looking forward to some more of your insights. And we have lots of questions!

 

[Gummy Bear]

@DSY5

I want one (mini-lathe) so bad I can taste it (so to speak). I have been able to use one at the end of my street. I was made in something like 1905,, It has a 2" wide leather drive belt and is soooo worn out. but if you don't push it it works. I did manage to make a new tank with it over the past 2 days. I'll post a pic, but it's not a Genesis it's for the C-E2.

 

[dsy5]

New vidéo with the same config. It's enormous
100% PG No VG

How do you get the conductivity in the stainless mesh, when the liquid tends to make it non conductive, as when it tempered for the coil mod? Also, how long a piece would be required to get at leat 1.5 ohms out of it? 5 amps is way to much to use in a battery mod and I'd hate to have lug that power supply with me!

 

[WillyB]

Gummy Bear all ready have my membership card

Too bad you spelled GENISIS wrong.

the code name for my new invention is genisis

 

[perlionsmitnick]

Welcome back Raidy. Grandma is ready !!

 

[Vaporblind]

WOW my eyes are burning what a monster thread. Been vaping for 2 weeks and thanks to Raidy I have been bit by the modding bug.
Gummie what part of Orlando are you in Im in Casselberry would love to compair notes one day.

 

[pailpoe]

For my ato with no heat wire : Ultra Low resistance Atomizer (0,3 - 0,5) : ULRA
I open a new thread :
http://www.e-cigarette-forum.com/forum/modders-forum/141443-new-ato-like-genesis-but-no-heat-wire.html

The principe :

Mesh 400 - Width 14mm

The power is between the electode and the mesh, not on the mesh, it's amazing.
Hard test vidéo with 27W !! :


THE MOST IMPORTANT IT'S THE DIAMETER AND LENGTH OF THE TUBE (2,4mm- 10mm)

How do you get the conductivity in the stainless mesh, when the liquid tends to make it non conductive, as when it tempered for the coil mod? Also, how long a piece would be required to get at leat 1.5 ohms out of it? 5 amps is way to much to use in a battery mod and I'd hate to have lug that power supply with me!

The resistance seem to be stable (After 1h, no change @10W), the mesh is in stainless steel, the interior tube are gold plated.
I failed to have 1,5 .
It's a Ultra Low resistance Atomizer : ULRA (0,3-0,5 Ohm)

 

[Roy Von Rogers]

Hallo,

Deine "mods" sind absolute Klasse!!!!!!

Ich lese jeden post der hier geschrieben wird Ich bin aus Bayern, eingewandert in der USA in 1974 und lebe in Northern Virginia, ausserhalb von Washington DC

Willkommen in unserem USA Forum und Ich hoffe das Deine "Mods" uns hier in der USA aushelfen koennen, da die "normalen" Cartomizers etc. vielleich frueher oder spaeter hier verboten werden.

Ich hoffe das Du einen Klasse Urlaub hast and mit vielen neuen Ideen zurueck kommst

Karen
PS: Deutsch schreiben faellt mir nach so vielen Jahren in der USA ein bischen schwer, also mache Dir ueber Dein English keine Gedanken!

Die Bayern spreche doch nicht deutsch, die haben ihre eigene sprache...lol

Dont feel bad I been here for over fifty years and finished Volkschule before I came here, and my deutsch is getting terrible.

Roy

 

[Roy Von Rogers]

Well I'm pretty close to a Mercedes battery..lol, I'm in the process of building mine with this one....

http://www.a123systems.com/cms/product/pdf/1/_ANR26650M1A.pdf

Roy

 

[Roy Von Rogers]

Hi, I'm back
but tired after 36h of driving,flying,waiting.
Wow, a lot happens here in this thread, i first have to read hundrets of posts.
But now i go sleeping. I'm soooooooooooo tired.
What a wheather shock: From 36° to -5° (97F to 23F), and snow everywhere here in Germany.

Greetings Raidy

SNOW ?????? Whats snow...lol

Roy

 

[Roy Von Rogers]

Dang...I'm finaly at the end of this unbelievable long tread, its after 4am now and its one of the best treads I've read sofar.

I just started this ecig thing a few weeks ago, burned an atty the first day, had two auto batteries went bad (too much juice), so....I took the stuff apart to see what was in there. When I saw the element was soldered I said "holy $%it", I dont wanna inhale solder fumes, I have soldered many things and know how bad solder fumes are. So three days ago I googled...

Stainless Steel Mesh
Nicrome Wire
Ceramic Filters

And now I've read this tread.....must be something about germans wanting to always improve stuff, were on the same wavelenght..lol

I've only done this a few weeks, and I'm already moding my stuff. I'm so tired, need to get some zzzzz.

Roy

 

[Zeroi]

Goodnight and sweet dreams on the mod.

Dang...I'm finaly at the end of this unbelievable long tread, its after 4am now and its one of the best treads I've read sofar.

I just started this ecig thing a few weeks ago, burned an atty the first day, had two auto batteries went bad (too much juice), so....I took the stuff apart to see what was in there. When I saw the element was soldered I said "holy $%it", I dont wanna inhale solder fumes, I have soldered many things and know how bad solder fumes are. So three days ago I googled...

Stainless Steel Mesh
Nicrome Wire
Ceramic Filters

And now I've read this tread.....must be something about germans wanting to always improve stuff, were on the same wavelenght..lol

I've only done this a few weeks, and I'm already moding my stuff. I'm so tired, need to get some zzzzz.

Roy