This thread is about playing with and exchanging ideas. Pailpoe's design is showing a different way to get a result. That it doesn't seem practical isn't the point. It is a working prototype of an atty using the wick as the heating element. Simply an idea with which others can play. If you want people to withhold ideas because they aren't good enough for you this forum has no purpose. If I make something I think is interesting it will be posted. So I apologize in advance.
- Status
This thread is about playing with and exchanging ideas. Pailpoe's design is showing a different way to get a result. That it doesn't seem practical isn't the point. It is a working prototype of an atty using the wick as the heating element. Simply an idea with which others can play. If you want people to withhold ideas because they aren't good enough for you this forum has no purpose. If I make something I think is interesting it will be posted. So I apologize in advance.
Hi modders,
right now I am very busy business. Therefore, I will be very brief.
How long a atty works:
I clean my atty once a week. First i wash it under very hot water, then i take a toothbrush and brush it.
Normaly a atty should work month without changing anything. Best vapour is after 4hours/4ml vapouring, not at the first hour.
I don't like overpowered atty's. My atty's works with ~2.3Ohms.
I depents very much on the quality of the liquid, how long a atty works without cleaning.
If you config your atty as an glowing oven, you will get a lot of waste on the screen.
Menthols vapours never cleans their atty's - whyever?
My newest atty works without kanthal. once the patent is through, I put him in front of you.
right now I am very busy business. Therefore, I will be very brief.
How long a atty works:
I clean my atty once a week. First i wash it under very hot water, then i take a toothbrush and brush it.
Normaly a atty should work month without changing anything. Best vapour is after 4hours/4ml vapouring, not at the first hour.
I don't like overpowered atty's. My atty's works with ~2.3Ohms.
I depents very much on the quality of the liquid, how long a atty works without cleaning.
If you config your atty as an glowing oven, you will get a lot of waste on the screen.
Menthols vapours never cleans their atty's - whyever?
My newest atty works without kanthal. once the patent is through, I put him in front of you.
Last edited:
@raidy
I do not know if you can say but what is your no filament atomizer operates on the same principle as my project?
People see right away some money in their invention. I do not like this state of mind. Sorry if you take it badly.
I do not know if you can say but what is your no filament atomizer operates on the same principle as my project?
People see right away some money in their invention. I do not like this state of mind. Sorry if you take it badly.
You misunderstand what I'm saying, and in no way did I say that he should withhold any ideas... my point is 3 threads on page 1 of the modders forum, in addition to the posts in this thread that, for the most part, just talk about how perfect and amazing his atty is. And don't get me wrong, that's fine and what not, but it seems to me like he's spamming because he's not getting the amount of attention Raidy has gotten with the genesis.
Now, were he to actually give more information and specs rather than just spam us with youtube videos about how much vapor he gets, and how perfect and amazing the atty is.. and keeping it in one thread, then I wouldn't have anything to say.
I probably was a little awkward and my English is not very good, so I'm not very talkative on this forum.
The path of my development happens here: http://www.forum-ecigarette.com/e-bricolage-et-prototypes-f37/mod-100-perso-a-suivre-t16642.html
And the principle is that the heating power is mainly in the inner tube, in the interface between steel and inside the electrode. We can thus rise to power much more important even if I do not recommend this use.
There is never a burnt taste with this method of heat and flavor are perfectly rendered.
This spray works with very low resistance and therefore requires a conversion of energy to lower the voltage and rise the current.
The path of my development happens here: http://www.forum-ecigarette.com/e-bricolage-et-prototypes-f37/mod-100-perso-a-suivre-t16642.html
And the principle is that the heating power is mainly in the inner tube, in the interface between steel and inside the electrode. We can thus rise to power much more important even if I do not recommend this use.
There is never a burnt taste with this method of heat and flavor are perfectly rendered.
This spray works with very low resistance and therefore requires a conversion of energy to lower the voltage and rise the current.
Last edited:
@cjhmdm
Ok I understand why a little more now. I only saw what he posted here. However his postings on the forum are legitimate and are in line what this forum is about. You don't have to read his threads. I just thought your comments weren't constructive or in the proper thread. With that lets not derail this thread any longer. Sry for any misunderstanding.
Ok I understand why a little more now. I only saw what he posted here. However his postings on the forum are legitimate and are in line what this forum is about. You don't have to read his threads. I just thought your comments weren't constructive or in the proper thread. With that lets not derail this thread any longer. Sry for any misunderstanding.
Ummm, so what? I understand exactly how his works and how one would go about making it. And he hasn't been doing what bothers you on this thread. Why would you come over here to post that? Why not post your views on those threads?
Pailpoe, I don't think that raidy's new one is the same, on the german forum others were working on one like yours in April, at least with respect to resistance to the mesh and no filament. Similar, but not the same. The patent pending atty has some element that must be precisely manufactured, and for cleaning it can be simply wiped clean. More I don't know, but can only imagine.
I posted it because Raidy hadn't posted in a few days and I was slightly concerned. The whole genesis concept is huge (proof of that is in this thread) and I thought maybe he (Raidy) may have stopped posting on the subject because of pailpoe's attention spamming. Anyway, I'm not going to turn this into a flame war, and that wasn't my intention, so let's just leave it at that...
Back on topic.. I'm still waiting for my mesh and wire to arrive, and I also have some ideas for making the coil/mesh removal a little easier.. but I need to get hands on with it first to be sure... that is if I can manage to not put super glue in it ><
With almost 70000 views and over a 1000 replies in month and half this topic don't deserve to be on the second page 
Raidy, I know you are the busy man but .... what's with part two?
Raidy, I know you are the busy man but .... what's with part two?
What's with part 2?
What a part 2?
Is there any part 2?
Yes, there comes a part 2.
But i'm so busy at the moment, that also my german main forum ECF waits for more. I'm realy sorry for that, but the day has only 24h and my brain to much ideas. At the moment i'm realizing a complete new invention completely outside the vapours scene. This costs my 25h a day.
I read this thread every day and i'm amazing about the ideas of the other modders.
my association ist to show new ideas and you work on it. What i see looks fine!
But i start with part 2 in the next days.
What a part 2?
Is there any part 2?
Yes, there comes a part 2.
But i'm so busy at the moment, that also my german main forum ECF waits for more. I'm realy sorry for that, but the day has only 24h and my brain to much ideas. At the moment i'm realizing a complete new invention completely outside the vapours scene. This costs my 25h a day.
I read this thread every day and i'm amazing about the ideas of the other modders.
my association ist to show new ideas and you work on it. What i see looks fine!
But i start with part 2 in the next days.
Take your time.
You give us allready so much in part one and thank you for that. I enjoy made Genesis with your instructions and much more enjoy vape with Genesis. Thanks again.
You give us allready so much in part one and thank you for that. I enjoy made Genesis with your instructions and much more enjoy vape with Genesis. Thanks again.
Last edited:
Not to worry raidy, at least you are home safe. I'm even curious about your other project it must be good too.
it must be good too.
I am curious about the other project too....
Rady, can I go to live with you ??? at least for a few years...
Rady, can I go to live with you ??? at least for a few years...
ok, I've got a spare top for my buzz (variable voltage) so I may be doing to modding here in the near future, I'm in love with the idea of a simple to use good tasting and vaping carto/atty that I don't need to change out all the time. maybe clean once every day or so.. the idea that I don't need anything but mesh is VERY appealing. thanks for the work raidy and everyone else, these are the reasons I hang out here.
pat
pat
- Status
Similar threads
- Locked
