- Status
BTW - There is one thing I forgot to mention about Dry Burnig.
If you have a VVPV, use a Lower Voltage to Dry Burn Verses a Higher Voltage. Lower Voltages are Easier on the Coil than Higher Ones.
If you have a VVPV, use a Lower Voltage to Dry Burn Verses a Higher Voltage. Lower Voltages are Easier on the Coil than Higher Ones.
For me, i wouldn't blow on the coil. That will kill it faster somehow.
i dont think she ment to blow on it while burning - blow the ash off AFTER it cools back down lol
can you explain the soaking, I have white vinegar, I filled a little dish, and dropped in a ce2 to try it, let it soak for a bit but it didn't seem to remove anything, am i supposed to leave it in like overnight? gonna try it again with a vision that needs to be cleaned.
I usualy soak mine for about 5 or 6 hours but Overnight is fine.
Then Rinse/Dry in hot water and it sound like your ready for a Dry Burn.
I have probably 6-7 visions, and I've only ever had one crap out on me in less than a month. The dry burn really does make a difference! As long as you aren't using a high voltage, don't be afraid to lay on the battery button. Sometimes I will burn them maybe 10-15 seconds at a time.
Rob if it makes you feel better I got one where the center pole is wonked sideways. Gonna have to do some work on that one to get it right.
Nope, the air tube, the metal tube thingy. When I looked at it the wick slits did not match to the wicks so I pulled the plug out. And when I did, the whole internal assembly immediately cocked over to the side so that the cup is touching the tubing. You cant get the plug back in of course now. It was definitely a WTF moment.
hes moved onto the stone and stardust and so far is having luck with them, so this is good news i guess.
That's Good to Hear.
3/4 of the e-Cig Battle is Finding the Right Combination of Batteries/Hardware/Ohms/e-Liquids/Etc.
The Other 1/4 is Keeping Up with the Constant Parade of New and Interesting Products gotvapes seems to be able to Come Up With.
Hope you had a Good New Year Bad and am Ready for some More Bombing Runs.
I've had that happen. You can usually center the cup by putting something such as a heavy pin, small, nail, etc, in the hole from the battery end, to center the cup while you push the cup seal back in. I use a finishing nail.
What ever happened to Rob soaking his Cartos in Vinegar?
With his Luck, the Vinegar probably caught Fire and Burned his House Down.
One vision and ce2 soaking in vinegar since last night. I will try them this weekend
No, thank you! I was reading this thread while I was getting ready to fill a new Vision with a new recipe juice I just made. I forget sometimes to look to see if the slits are lined up. They were off. I had to pull the seal and realign them. Thanks for the reminder.
What ever happened to Rob soaking his Cartos in Vinegar?
With his Luck, the Vinegar probably caught Fire and Burned his House Down.
Vinegar plus baking soda equals fire extinguisher.
Throw some baking soda in there for some fizzy action, I tried doing that with some atomizers, don't think it works very well cleaning the oil, but it may help you.
Vinegar plus baking soda equals fire extinguisher.
Throw some baking soda in there for some fizzy action, I tried doing that with some atomizers, don't think it works very well cleaning the oil, but it may help you.
Hmm, that is a good question. It might, it's why I use a sonic cleaner (the motion bubbly thing) as often as not. And that DOES work well with atomizers too.
- Status
Similar threads
