Another 3.7v juicer

[Sgood1971]

Nothing special, but I was pretty happy with it. It's hard to tell in the pic, but the LED in the bottom under the bottle is blue. It looks pretty good at night. Also, used the blue horn style switch from madvapes.

The AW battery lasts me a full day, and the bottle will last me almost 2 full days.

 

[CloudBurst]

Bout time Dgood! Looks good!

 

[hangin1]

looks great, I wish I was handy and could make one of these myself but unfornately I am just not that skilled nor have the time to do it.

 

[Sgood1971]

Thank you Stormi, I don't know if you have seen the thread with my mighty-puffer mod but it's a juicer now too. Once it looks presentable I'll be updating that post. I can not imagine going back to no juice bottle now.

Hangin1, it's not nearly as hard as you think and it takes approx. an hour to build one without an LED and only slightly longer with one. After you have built one or two, I would say you can knock them out in 20 min. or so.

If your soldering skills are subpar, you can even get shrink tubing and solderless crimp connectors. The only hard part is waiting on the parts to arrive after you place your first order.

 

[Sci]

Lookin' good, Sgood.
I wish my drill/bit would drill through a carto. I want a JB-C.

 

[CloudBurst]

I had to go back to filling for a minute on the plane last week but I also took my vibe-vape in my carry on, first time I tried it and they never even looked twice! Vaped it on the way there! Swcretely, of course! Had to use my 510 on the way back and in the airport. I'll NEVER go back for good! Why would anyone?

 

[Sci]

I had to go back to filling for a minute on the plane last week but I also took my vibe-vape in my carry on, first time I tried it and they never even looked twice! Vaped it on the way there! Swcretely, of course! Had to use my 510 on the way back and in the airport. I'll NEVER go back for good! Why would anyone?

You used it in flight?

 

[48lowes]

Sgood1971
What did you use for the connector at the atty? The plastic line looks like it's from the spray bottle from Seedman's. How did you make a leak proof connection at the bottle?
inquiring minds need to know. Nice job by the way.

 

[Sgood1971]

It's a 510 connector with mighty putty holding it in place.
The plastic line I ordered 4 feet of from McMaster Carr. I can look around and see if I can find a link.
I drilled right through the dripped tip with a 1/8 drill bit. It's 1/8 line and it slides through really snug. No leaks so I was happy.

Thank you for the kind words.

 

[Sci]

It's a 510 connector with mighty putty holding it in place.
The plastic line I ordered 4 feet of from McMaster Carr. I can look around and see if I can find a link.
I drilled right through the dripped tip with a 1/8 drill bit. It's 1/8 line and it slides through really snug. No leaks so I was happy.

Thank you for the kind words.

Does any of the Mighty Putty 'taste' seep through? How long did you let it cure?

 

[Sgood1971]

The connector is sealed so no taste and it cured 24 hours. I actually used mighty putty to seal a non-sealed connector, I let it sit for 48 hours and it has never leaked or tasted funny.

 

[JRWReich]

I think that's awesome and looks great. Who woulda thunk that you can build a better ecig than a 510 kit, with 9$ of Radio Shack parts.

 

[Sci]

The connector is sealed so no taste and it cured 24 hours. I actually used mighty putty to seal a non-sealed connector, I let it sit for 48 hours and it has never leaked or tasted funny.

Kool. It seems to last also? I've found out epoxy will let go from plastic when you least expect it.
Btw, that is one clean looking mod. Seems like just a few short weeks ago I remember a quote about someone being a network guy, not an electronics guy... You've come a long way in a short time!

The reason I asked about the taste, I was in a bad car wreck years ago & can't smell anything. So, I have to be careful with what is part of something I plan on inhaling. I get the effects from things, just can't smell 'em. Found that out the hard way with an ammonia cap. Don't ask...

 

[Sgood1971]

I think that's awesome and looks great. Who woulda thunk that you can build a better ecig than a 510 kit, with 9$ of Radio Shack parts.

Thank you, yea it was total about $7.50 for parts and they are fun to build too. Think model cars or something.

Kool. It seems to last also? I've found out epoxy will let go from plastic when you least expect it.
Btw, that is one clean looking mod. Seems like just a few short weeks ago I remember a quote about someone being a network guy, not an electronics guy... You've come a long way in a short time!

The reason I asked about the taste, I was in a bad car wreck years ago & can't smell anything. So, I have to be careful with what is part of something I plan on inhaling. I get the effects from things, just can't smell 'em. Found that out the hard way with an ammonia cap. Don't ask...

LOL I'm still a network guy. and not an electronics guy but I have to admit this is fun.

The mighty putty on my mighty puffer is still holding strong. Around the connector it gets juice on it from time to time and it's even still holding strong there. I really need to quit puffing on that thing and finish it up.

 

[Connman]

Nice job Sgood. Those white boxes and some good modding sure do make a clean looking mod.

 

[Sgood1971]

Thanks Conman and you're right, I really like the white box.

 

[jcamacho]

Good job, looks nice.