- Status
My only beef about folks in Texas (at least the ones in Southeast Texas) is that they have no cotton pickin' idea what the left lane is for.
I have clients in Houston and I've made the 7-ish hour drive between the Alabama Gulf Coast and Houston too many times to count. Every time there's a traffic cluster, it's always some jackwagon with Texas tags doing the speed limit in the left lane.
Get the FOXTROT out of the left lane, Texas!
I have clients in Houston and I've made the 7-ish hour drive between the Alabama Gulf Coast and Houston too many times to count. Every time there's a traffic cluster, it's always some jackwagon with Texas tags doing the speed limit in the left lane.
Get the FOXTROT out of the left lane, Texas!
I don't know when that tren started, but it is common place now in Texas and aggravating as can be. The most irritating stretch of road in Texas is heading East from San Antonio on I-10 for that very reason. THere, it is a little more understandable because of the 5-foot entrance ramps to I-10 along there, but it is difficult to make that drive without reaching for a weapon. If I could strap some full_auto paint ball mini-guns to the roof, I would... but those would only be for ranging the target.
I want to start a point system for driving. After, say, three points in a month, you can't get on highways for six weeks. Allow each driver to "tag" three cars in a month, so people would use them wisely. A total peer-based driving system. Drive like a jack-wad, three people "tag" your plate number, and no highway for you for six weeks... Anybody in?
Yeah me and my wife both almost road rage when there is a slow poke in the fast lane, she will get right on there azz and lay on the horn ( she don't have much patient any more ), I will pass them on the right and shoot them the look ( and also see if they are on their cell ).
I drive all over and its not a problem unique to TX One thing I like about TX Drivers is on 2 lane roads most times if you come up on a slower driver they will take the break down lane so you can pass.
Yeah , I'm from ohio originally and the first time some one took the breakdown so I could pass here, I thought , something must be wrong with their crappy car.
Then it happened a few more times with nicer vehicles, and then I realized it was a texas thing
Then it happened a few more times with nicer vehicles, and then I realized it was a texas thing
I checked with vapegeeks and they do have kanthal wire ¢.99 a meter.
I stopped by and christina was happy to see me, her shop had changed since I was there last, alot of new toys at very reasonable prices, I defiantly will be going back more often.
I'm vaping on a microcoil I made for my evod out of 28g kanthal ,10 wraps 1.7 ohms. So far so good for my first coil ever.
Flavor is better, vapor is about the same maybe a little more, throat hit is a little better as well.
I stopped by and christina was happy to see me, her shop had changed since I was there last, alot of new toys at very reasonable prices, I defiantly will be going back more often.
I'm vaping on a microcoil I made for my evod out of 28g kanthal ,10 wraps 1.7 ohms. So far so good for my first coil ever.
Flavor is better, vapor is about the same maybe a little more, throat hit is a little better as well.
Yeah I know I can get it a lot cheaper online, I was just wanting to try a micro-coil and I don't like to wait, |but I am going to order some soon.
Well I stoped by vapegeek's today, I picked up some cinnageek juice, and before I left christina asked me to take a look at a few mods the were broken or messed up ( I'm good at fix'n things ).
1 was a Vamo with stripped 510 threads. And a ego type vv device ( not sure if it is a Joytech, dosen't say it any where ) that I'm pretty sure has a blown diode by the looks of the circuit board.
I know I have seen some where something for stripped threads that require you to drill out the old threads and insert some kind of shim that has threads on it ( wasn't for a ecig but it may still work if I can find one the right size ) , just gotta do some research.
The ego threads are still good but the 510 are so stripped that you cant even use a 510 atty.
So until I come up with a fix or decide I cant fix it, my evod works on it so I'm gonna put it use, since all I have is a twist and have been thinking about getting a vamo this is a good way to find out if I want one or not.
1 was a Vamo with stripped 510 threads. And a ego type vv device ( not sure if it is a Joytech, dosen't say it any where ) that I'm pretty sure has a blown diode by the looks of the circuit board.
I know I have seen some where something for stripped threads that require you to drill out the old threads and insert some kind of shim that has threads on it ( wasn't for a ecig but it may still work if I can find one the right size ) , just gotta do some research.
The ego threads are still good but the 510 are so stripped that you cant even use a 510 atty.
So until I come up with a fix or decide I cant fix it, my evod works on it so I'm gonna put it use, since all I have is a twist and have been thinking about getting a vamo this is a good way to find out if I want one or not.
Last edited:
I was going to say I'm from Aggieland. Then I read the post and realized that Aggieland refers to more than one place. I live up by Utah State University, but they imply a different meaning with the word Aggies...
Well here in Texas, Aggies are students or alumni of Texas A&M University.
The term Aggies is derived from the meaning of A&M , Agriculture & Mechanical.
This while area is so wrapped up in the university it is referred to as Aggieland.
But I guess you are from Aggieland as well seeing as how Utah state is named the Aggies.
just not the one I was referring to when I started this thread.
Attachments
Last edited:
man i almost had to come find you a put a whoopin on you for mentioning aggieland vapor and leaving out vapegeek, but then you totally redeemed yourself! lol. aggieland vapor is a joke compared to vapegeek and i doubt they'll stay in business for too long. It's not that i so much dislike the store (which i kinda do actually), but it's the fact they have to be so petty and try to talk crap about vapegeek to keep people from going there...
also i'm up in bryan
We need to get a vapenight going!
also i'm up in bryan
We need to get a vapenight going!
hey aggies out there, do you think that you could use another store? i would do starter kits, to vv/vw mods, to higher end mechs and rba's. probably higher end juices idk about mixing own juices. Feedback would be appreciated.
Domcap
There are actually three now. A new store opened recently in Bryan next to Tequeria Arandas.
Sent from my SCH-I545 using Tapatalk 2
There are actually three now. A new store opened recently in Bryan next to Tequeria Arandas.
Sent from my SCH-I545 using Tapatalk 2
- Status
Similar threads
