Anybody else sick of 3 post / tri-post RDA 's?!

[super_X_drifter]

Tree, I just got one of these. The Odin by Loki Labs. Look closely at it - it's a different spin on AFC and wire capture.

http://lokilab.com/products/odin-rda

I sent mine off to a friend on here to drill the centerpost for bottom feed about 15 minutes after I got it so I haven't built it yet but I can tell you that it's SS, USA made, appears well made, it's hefty and only $65.

The Well thought AFC is made for dual or single coils.

I look forward to building vaping and reviewing mine.

 

[Cearamm]

Uh check out the Odin rda. Im glad im not the only one lol.

I have it. Easy as heck to build. Great flavor,
Ample clouds. Center post builds not necessary.


The build deck is a big leap forward. Theres only one "post" per se. The negative
Terminals are integrated into the body

 

[reeftivo]

Thanks again reeftivo for the shout out on the 454 big block.

This thing is as epic as it's name, it looks to be the most perfect dripper for me out at the moment, I have one on it's way! It's a genuine (looks to be) well built, nicely designed dripper for $85, which is damm fair to me. It's what I've been hoping for, a magma with airflow for clouds!

Check this beast out!

I always get a kick out of twisteds videos

a note on the 454! Before I received mine, I read that the AFC ring should be pulled and the o-ring juiced a bit before building. Otherwise it could be a booger to get it to move when you start heating the unit from a new build. I pulled mine and put some e-liquid on the single o-ring and it moves fine. Some don't like the negative lead ring and chose to attach directly to the screws but I find the ring works just fine and is actually easier for me. Nice little unit for sure!!!! I got mine from 101vape for 67 bucks + shipping

few pics of mine that I posted on another thread


on a windros


26g, .06ohm quad with cellucotton.


decent little cloud

 

[treehead]

Seriously i havent had any leaking and the flavor is on par with my Magma which does leak more than i would like


Sent from my iPhone using Tapatalk

Yeah I'm not sure what that was about, I think Twisted is just a little..."silly" sometimes . I mean with an epicly generous juicewell like that, why would you need to over-drip?!

Plus, anything with a good juice well will leak if you tilt it. This thing looks so awesome, I can tell just from the pictures and video that the leaking just user error. Even if it did by design (which it doesn't), who cares! lol those airholes are 3mm! That's so freaking awesome, it'll probably be the first atty I won't ever drill. 12mm of airflow?! I'll take 2.

 

[treehead]

You can drill it out actually. Instead of a drill bit, you would use a router bit to elongate the inside airflow holes since you can't increase the diameter die to the thin wall between the juice well. The outer airflow holes can still be enlarged with a regular drill bit though. Honestly, I like the airflow on mine. I keep it set at the middle setting for more flavor and denser clouds.

That's true, I hadn't even thought of that, thanks for the idea man . Hmmm, now you got me thinking...

I've always thought you could maybe widen the airflow towards the outer edge, but since I don't own one, I wasn't sure if the air channels were a straight "L" or not. That's awesome to know they aren't curved, I've always loved the design of the magma, it's like my favorite Tobh Atty, but with airflow from the bottom up!

 

[treehead]

Tree, I just got one of these. The Odin by Loki Labs. Look closely at it - it's a different spin on AFC and wire capture.

Odin - RDA | Loki Lab

I sent mine off to a friend on here to drill the centerpost for bottom feed about 15 minutes after I got it so I haven't built it yet but I can tell you that it's SS, USA made, appears well made, it's hefty and only $65.

The Well thought AFC is made for dual or single coils.

I look forward to building vaping and reviewing mine.

Wow that's beautiful Super! That'll be an epic squonker I can tell! You gotta pm me that review brother, if I don't buy it before then of course . Now I have a decision to make whether to buy the 454 or odin first...

I seriously like the look of it, it's like my favorite Tobh, but condensed for better flavor, and much better AFC design. And as you mentioned, a quality US made hunk of steel! I'm really digging how solid it looks, I abuse my build deck, because if the coils aren't exactly perfect, I tug on'em like a silverback gorilla until they are haha, and this looks sturdy. That's awesome that the peek insulator is enjection molded too, I bet it's the strongest positive post on earth right now! Plust, that engraving though .

That's probably the perfect dripper for a squonker dude, nice choice. I've got some black ceramic 22mm tubes on the way in the mail, I'm thinking about making a few squonkers myself btw. I'll keep the micro-coil's forum updated.

 

[treehead]

I always get a kick out of twisteds videos

a note on the 454! Before I received mine, I read that the AFC ring should be pulled and the o-ring juiced a bit before building. Otherwise it could be a booger to get it to move when you start heating the unit from a new build. I pulled mine and put some e-liquid on the single o-ring and it moves fine. Some don't like the negative lead ring and chose to attach directly to the screws but I find the ring works just fine and is actually easier for me. Nice little unit for sure!!!! I got mine from 101vape for 67 bucks + shipping

few pics of mine that I posted on another thread
View attachment 352371

on a windros
View attachment 352372

26g, .06ohm quad with cellucotton.
View attachment 352373

decent little cloud
View attachment 352374

Thanks for sharing brother! Yeah Twisted's a funny dude, I love how real *cough* unproffesional! *cough* his videos are, he's just a real vaper, giving real advice .

I was wondering how she'd look with some actual nice coils in'er, unlike twisteds, bless the poor guy lol. That's a badarse setup, with some proof of clouds, thanks man. I like how your dripping straight on your cotton, even though you still have a nice drip well, I bet dry-hits are non-existent with that puppy. That's one thing I was wondering myself, if having some wick tails going upward would catch any vapor before it left, but I doubt it does. Even if it did, it'd be worth it to harp on it hard without any dry hits.

Do you happen to know where the thread is, I'd love to check it out?

 

[AMDTrucking]

3 post RDA doesn't bother me at all:

 

[treehead]

3 post RDA doesn't bother me at all:

Me neither, I'm more than capable of making it work. However I'd like the RDA to work for me for once, I think it'd be nice to have a post for each individual connection, and to have those posts right on the outer rim.

(Bent the legs just to fit it!)

(Here's another purdy continuous parallel, which side did I start on? )

I'm somewhere behind that cloud lol.

 

[vapero]

I have a few omegas and quasars so once you have a good 3-post rda the rest are the same, I just don't need another one

but I do love my origen and i'm getting the veritas soon...

 

[jpcwon]

I have a few omegas and quasars so once you have a good 3-post rda the rest are the same, I just don't need another one

but I do love my origen and i'm getting the veritas soon...

I have experience with a bunch of drippers, but the one I am enjoying the most right now is the Veritas. It is pretty easy to build on once you get the hang of it, and the flavor is out of this world (can definitely compete with the Origen and the Magma IMO)....and the best part? The design is such that it is nearly impossible to get it to leak......and you drip though the (massive) cyclops air hole...how cool is that?!