Anybody Using A Kabuki?

[Knifemaker]

[emoji14]opcorn:


LOL! This "IS" my EDC, along with a Radius/Kabuki!

Knife made by Me. A half American Cherokee Indian, and half German. Which makes me both civilized, and Arrogant at the same time. My people were here BEFORE there WAS USA, and still I am Proudly Patriotic!


Note 5!!!

 

[Knifemaker]

@gnees thanks for pointing me in the direction of those engraved tanks! I contacted them, and have 2 dragon engraved on the way to me soon, and plans to send them some custom art to perhaps make a few more if they think it's feasible!!!

I love it, and it's gonna look amazing on my Kabuki!!!

BB, You can also take a plain tank to just about any Trophy shop, or higher end Jewelry Store and have a tank taglio engraved with just about anything you want!
Electro/Acid etching is also an option. I did a LOT of it on Knives for folkes.

Bad Pic, I know, but here are some I did for Ted Nugent on Set I made for him in the very early 90's
Knife

 

[spacetime]

@Knifemaker, you have an amazing talent sir.

 

[Katdarling]

Those truly ARE beautiful, Knife!

 

[coldgin96]

I said no such thing. Nor would I. I'm about as flag waving as you can get. Even though you implied that I'm not patriotic, it must be remembered that the goodness of vaping wasn't brought to us from the USA. LIke it or not, we didn't put it on the market, nor did we make them first. Far from it.
Without the Chinese, like it or not, we wouldn't have had this wonderful chance to get off the stinkies. I must also remind you that we are forced to use Chinese coils in our beloved Kabukis. Does it also make me, (you as well), now un patriotic? By your logic, Yes it would suggest so!
Perhaps I've just been at this vaping thing a lot longer than you. When I started, there was NO Provari, Wish there had been. It would have saved me a Lot of disappointment, and Money!
I am quit thankful that there are at least a very few Domestic companies making high quality products in the Vape world for us.
But I am not going to Flag Wave to the extent that I, thru ignorance, self induced blindness, cannot see what has come before, or what is right before my eyes.

I am not anti American products whatsoever. to suggest as so much is arrogant, and foolish. Typical of a true elitist. , Nor am I a namby Pamby! I Vote AMERICAN, Not Progressive, Social Communist.
This is as far as I'm willing to take this conversation, or your attack. This is politics, and Not allowed here! I'm done with this foolishness!

Knife

I refer you to the Radius - Part 2 thread post #417 where you did indeed suggest I was flag waving and trying to be a superior elitist all because I suggested you call customer service concerning your troubled fake kabuki.

As far as your other accusations, you are making them up and pulling them out of thin air. I simply laughed about your comment (post #5127) after suggesting I was the flag waving elitist. Nothing wrong with that post at all, Brother, just funny and ironic after that reference about me.

For the sake of everyone else in here, I will let you have the last word. Something tells me you will anyway.

 

[ENAUD]

I just want to be able to put any tank I have onto any device that I have. I do not care which connector that happens to be, but it happens to be 510 for me.

So.......................

I flipped a Ti 2.5 Provi the other day, with a 510 connector Cerotank on top, and it hit the tile in FULL spin, far from gently. Nothing broke, nothing bent, and the only thing it required was a wipe-down.

Vapin' ON (as Ms. @tearose50 might advise).

Got to love those Stainless Steel tanks!

 

[DPLongo22]

BB, You can also take a plain tank to just about any Trophy shop, or higher end Jewelry Store and have a tank taglio engraved with just about anything you want!
Electro/Acid etching is also an option. I did a LOT of it on Knives for folkes.

Bad Pic, I know, but here are some I did for Ted Nugent on Set I made for him in the very early 90's
Knife

BEAUTIFUL!

@Knifemaker, you have an amazing talent sir.

Agreen (and thumbs up for KG, Jr, Spacelord. Last of a great breed...

Those truly ARE beautiful, Knife!

Again, agreed.

 

[AstroTurf]

I just want to be able to put any tank I have onto any device that I have. I do not care which connector that happens to be, but it happens to be 510 for me.

So.......................

I flipped a Ti 2.5 Provi the other day, with a 510 connector Cerotank on top, and it hit the tile in FULL spin, far from gently. Nothing broke, nothing bent, and the only thing it required was a wipe-down.

Vapin' ON (as Ms. @tearose50 might advise).

I have found the Daily Holster Carry of a Provi Mini and a P3 Naughty Tank problematic...

In and out of a vehicle all day caused a torqueing of the combo. Slightly cocking the tank in such a way to cause the airflow adjustment ring to bind on the P3 Tank.

My hope is the the Provi Ti V2.5 Long Tube/Kabuki Tank with either Poly or Steel Tank will not have this problem.

I think I'll test it out with a Steel Provi just incase it rips/tweeks the Flat P3 Connector on the Mod.

That Is All...

Jim

 

[Knifemaker]

Thanks Folks!

Knife

 

[Ca Ike]

I said no such thing. Nor would I. I'm about as flag waving as you can get. Even though you implied that I'm not patriotic, it must be remembered that the goodness of vaping wasn't brought to us from the USA. LIke it or not, we didn't put it on the market, nor did we make them first. Far from it.
Without the Chinese, like it or not, we wouldn't have had this wonderful chance to get off the stinkies. I must also remind you that we are forced to use Chinese coils in our beloved Kabukis. Does it also make me, (you as well), now un patriotic? By your logic, Yes it would suggest so!
Perhaps I've just been at this vaping thing a lot longer than you. When I started, there was NO Provari, Wish there had been. It would have saved me a Lot of disappointment, and Money!
I am quit thankful that there are at least a very few Domestic companies making high quality products in the Vape world for us.
But I am not going to Flag Wave to the extent that I, thru ignorance, self induced blindness, cannot see what has come before, or what is right before my eyes.

I am not anti American products whatsoever. to suggest as so much is arrogant, and foolish. Typical of a true elitist. , Nor am I a namby Pamby! I Vote AMERICAN, Not Progressive, Social Communist.
This is as far as I'm willing to take this conversation, or your attack. This is politics, and Not allowed here! I'm done with this foolishness!

Knife

Actually the first electric cig was invented in the US back in the 50,s I think but it never went anywhere.

 

[Ca Ike]

It's an interesting situation. Zen supports ProVape by being one of the few (only?) makers to produce P3 tanks, yet ProVape ignores the chance to support his Z2. aOf course, I am not privy to the details, as in if the P3 was a contract project or if the Z2 has the wrong dimensions. Even if that's true for the Z2, I can't see that it would be anything major to produce a Z2 Radius.

I have all three connectors and can't really feel a difference in the quality of the vape, but the Z2 is by far the easiest to attach. And just glancing at the base, it just looks right. Jewelry-like craftsmanship and sound design is evident.

Edit: Was typing this when Ca Ike posted the information about Svoemesto.

Zen would have to explained it in detail if he wants but I think the Z2 thread is better suited to mechanicals since it seems it was designed specifically for hybrids.

The problem I see with using it on a provary is the tube/body would have to be widened to accommodate a bigger top cap. Provape already offers the P3 thread specs to anyone that wants it.

 

[Knifemaker]

Actually the first electric cig was invented in the US back in the 50,s I think but it never went anywhere.

Yes, you are exactly correct. Sadly it didn't take off then. and as they say, that was then, and this is now. And I appreciate being able to stay off the stinky's no matter who brought them out today.

 

[DarkZ]

back in the 50s cigs were cheap as hell, cig companies were still at their prime, there is no way in hell a small individual would be able to go up against these big corps.

I'm glad the Chinese have brought this device back to life, and I'm sure most of us are patriots for their own country. It's always easier to point the fingers to others/countries during hard times. In fact, I know many Chinese folks that are looking up to the Americans, and there are "bad apples" in every corner of the world. After all, the vaping community had brought us all together no matter what color/race we are.

Life is too short to .... about it, enjoy it while you can still vape.

 

[Knifemaker]

Zen would have to explained it in detail if he wants but I think the Z2 thread is better suited to mechanicals since it seems it was designed specifically for hybrids.

The problem I see with using it on a provary is the tube/body would have to be widened to accommodate a bigger top cap. Provape already offers the P3 thread specs to anyone that wants it.

I know I would Love to have one of ZEN's Mod's. Beautiful Workmanship!
Did any of you see the Bronze version on the review with him and PB? I know he doesn't make it in that combo of colors any longer, but, Zowie!!! Most beautiful Mod I've ever seen. It was a two tone antique Brond ZNA.

Knife

 

[Knifemaker]

back in the 50s cigs were cheap as hell, cig companies were still at their prime, there is no way in hell a small individual would be able to go up against these big corps.

I'm glad the Chinese have brought this device back to life, and I'm sure most of us are patriots for their own country. It's always easier to point the fingers to others/countries during hard times. In fact, I know many Chinese folks that are looking up to the Americans, and there are "bad apples" in every corner of the world. After all, the vaping community had brought us all together no matter what color/race we are.

Life is too short to .... about it, enjoy it while you can still vape.

Well said Brother!

Knife

 

[Knifemaker]

@Knifemaker, you have an amazing talent sir.

Thank You S.L.!

 

[DPLongo22]

Bad Pic, I know, but here are some I did for Ted Nugent on Set I made for him in the very early 90's
Knife

I'm thinking that Sir Stranglehold wasn't cutting his butter with them.

 

[classwife]

I know I would Love to have one of ZEN's Mod's. Beautiful Workmanship!
Did any of you see the Bronze version on the review with him and PB? I know he doesn't make it in that combo of colors any longer, but, Zowie!!! Most beautiful Mod I've ever seen. It was a two tone antique Brond ZNA.

Knife

I love my ZNA

 

[AstroTurf]

I know I would Love to have one of ZEN's Mod's. Beautiful Workmanship!
Did any of you see the Bronze version on the review with him and PB? I know he doesn't make it in that combo of colors any longer, but, Zowie!!! Most beautiful Mod I've ever seen. It was a two tone antique Brond ZNA.

Knife

This one?

Sent from my iPhone using Tapatalk

 

[Enta]

Got some more great mail today and now my Kabuki D'Elegance has a home.