Anybody Using A Kabuki?

Status
Not open for further replies.

coldgin96

Resting In Peace
ECF Veteran
Verified Member
Aug 22, 2012
3,202
19,383
North of Detroit, way south of Heaven
Buna please
I don't remember where I got these specs, so please don't quote me. I have this size jotted down in my Kabuki notes. 5/8" OD 1/2" ID x 1/16

I purchased mine from HOH and a spare pack came with Jackie's Christmas present [Kabuki D'Elegance (P3)].

Happy New Year!
 

Freedom2Vape

Ultra Member
Supporting Member
ECF Veteran
Verified Member
May 8, 2015
1,579
7,547
Texas

Freedom2Vape

Ultra Member
Supporting Member
ECF Veteran
Verified Member
May 8, 2015
1,579
7,547
Texas
I don't remember where I got these specs, so please don't quote me. I have this size jotted down in my Kabuki notes. 5/8" OD 1/2" ID x 1/16

I purchased mine from HOH and a spare pack came with Jackie's Christmas present [Kabuki D'Elegance (P3)].

Happy New Year!
I believe these were posted when they were discussing how to make a polymer tank for the Kabuki. When Zen~ offered that option, I purchased a few and replaced the glass tanks with them but also had to replace the o-rings as the fit of the polymer tank was a bit loose. YMMV.
 

Jim-

GCS E (1) + V (1) + M (1) = 3
ECF Veteran
Verified Member
Dec 18, 2013
1,329
5,811
Los Angeles County, Ca. USA

ENAUD

Resting In Peace
ECF Veteran
Verified Member
Jul 23, 2013
9,810
64,089
Bordertown of ProVariland and REOville

Freedom2Vape

Ultra Member
Supporting Member
ECF Veteran
Verified Member
May 8, 2015
1,579
7,547
Texas
F2V, do these work with both the polycarb and glass sections?
I didn't try with the glass tank on the P3 Kabuki, but it worked great on the MBV 510 Kabuki with the glass and polycarb tanks and on the polycarb tank on the P3 Kabuki.
 

ENAUD

Resting In Peace
ECF Veteran
Verified Member
Jul 23, 2013
9,810
64,089
Bordertown of ProVariland and REOville
I didn't try with the glass tank on the P3 Kabuki, but it worked great on the MBV 510 Kabuki with the glass and polycarb tanks and on the polycarb tank on the P3 Kabuki.
Thanks for the info :thumbs:
 

JUMA55

Ultra Member
ECF Veteran
Verified Member
Jul 4, 2014
1,031
6,104
Waco, TX
Does anyone know if one is going to be able to use standard Nautilus coils in the new Triton Mini? If I've read correctly, one cannot use the new Triton Mini coils a Kabuki. Correct? When the Triton Mini is on the market where one can purchase it without the Aspire mod, then I'd like to try one. But I have no interest in having to purchase yet another type of coil. Thanks.
 

Knifemaker

Super Member
ECF Veteran
Verified Member
Jan 17, 2010
725
2,220
Central Texas
Please, PLEASE do not get the impression I am judging. Everyman has to do his own thing in his own time. :blush: I just want to point out or remind you, if you are getting Social Security Disability, it's not being paid for by a Chinese worker...

Just so you know, I'm on Disability... :cool:

Happy New Year!
Your so right! It from money "I" Paid in. Now with that said, where do your bat's come from? And before you tell me that they aren't available made in the U.S., are you aware that the U.S. had every opportunity to purchase the mines that the Chinese now own that produce the needed lithium?

And what mods do you own? any from out side the U.S.? Humm?

The only store to shop of much of anything out in the middle of Texas where I live is Wally-World. The King of Counterfeiters. But they do it in a very sneaky way. Much of their inventory is fake. they get away with it by threatening companies that they will no longer do business with them, unless they go along.

The Pair of jeans for instance, marked with a top brand name, and given style name, are usually NOT the same jeans you would find at a department store. Only the label is the same. Not the material, nor the quality. sure you save 3-4 dollars. But in truth, the Department store version is 4-5 times the quality. The same with electronics, All clothing, tires, cutlery, you name it. And worse of all, Food!!!

It's a HUGE scam. And John Q. Public has bought it hook, line and sinker.
In electronics for instance, many times the manufactures ssn, will have a different set of numbers at the first, separating it from the same modes sold at say, Office Supply Stores. One is made in America, and one in China. One is repaireable, and one only replaceable if repair is needed. Yet Both carry the same Model Number and Name. Legal counter fitting. Plain and simple.

At least in this case, we can make our own decision, and not simply be the unwitting dupes of marketing and slip shod business practices!

Knife
 
Last edited:

stillnotsmoking

Ultra Member
ECF Veteran
Verified Member
Mar 1, 2013
1,379
2,092
GA, USA
Does anyone know if one is going to be able to use standard Nautilus coils in the new Triton Mini? If I've read correctly, one cannot use the new Triton Mini coils a Kabuki. Correct? When the Triton Mini is on the market where one can purchase it without the Aspire mod, then I'd like to try one. But I have no interest in having to purchase yet another type of coil. Thanks.

I'm using the triton mini coils in my Kabuki as we speak

Sent from my GS5
 

Knifemaker

Super Member
ECF Veteran
Verified Member
Jan 17, 2010
725
2,220
Central Texas
I'm using the triton mini coils in my Kabuki as we speak

Sent from my GS5
I have a pack of the Triton Mini Coils here, and notice that the top is not threaded. How do these work?
I read here on the forum that the inside dia. was larger, and therefore would have better air flow. The ones I have here, have smaller air holes in the bottom, as well as smaller dia. coils.

Bummer!
 

Bird Dog

Senior Member
ECF Veteran
Verified Member
Jan 20, 2015
215
436
45
Ohio
I have a pack of the Triton Mini Coils here, and notice that the top is not threaded. How do these work?
I read here on the forum that the inside dia. was larger, and therefore would have better air flow. The ones I have here, have smaller air holes in the bottom, as well as smaller dia. coils.

Bummer!

The Triton Mini coils do have threading at the top and do have larger air holes compared to the regular nautilus coils. I'm not sure what you have but I don't think they are Triton Mini coils.
 

MrBabushka

Senior Member
Sep 30, 2015
75
208
42
British Columbia
Does anyone know if one is going to be able to use standard Nautilus coils in the new Triton Mini? If I've read correctly, one cannot use the new Triton Mini coils a Kabuki. Correct? When the Triton Mini is on the market where one can purchase it without the Aspire mod, then I'd like to try one. But I have no interest in having to purchase yet another type of coil. Thanks.
They work fine in the P3, I don't have a 510 though.
 
  • Like
Reactions: AstroTurf

Zen~

Unregistered Supplier
ECF Veteran
Sep 12, 2010
6,024
21,316
Spencerport, NY
That one isn't bad at all! Was looking at the mini ionizers and towers, Unfortunately I can't get any of zen's tips shipped here. Would love Matilda in black delrin though, that would be one sexy tip.
RBAsupplies(DOT)com has them, I believe he ships internationally. (not Matilda)


I have a pack of the Triton Mini Coils here, and notice that the top is not threaded. How do these work?
I read here on the forum that the inside dia. was larger, and therefore would have better air flow. The ones I have here, have smaller air holes in the bottom, as well as smaller dia. coils.

Bummer!

You're not describing a Triton Mini Coil...

hm....so which one is better? BVC or triton mini? I have 30 packs of BVC on its way though....:confused:

So I've been testing the Triton Mini Coils in a P3 Kabuki this past two weeks...

I VASTLY prefer the Nautilus BVC coil... I do not care for the flavor of the Triton Clapton OR the Kanthal 1.2... nope... not at all.
 

Konvict

Senior Member
ECF Veteran
Aug 12, 2014
86
182
Thailand
So I've been testing the Triton Mini Coils in a P3 Kabuki this past two weeks...

I VASTLY prefer the Nautilus BVC coil... I do not care for the flavor of the Triton Clapton OR the Kanthal 1.2... nope... not at all.

Thank you for telling us this, Zen. I was waiting and hoping this would be the case, because like DarkZ I have a lot of BVC coils on the way to finally have a decent stock.
 

madangus

Super Member
ECF Veteran
May 10, 2015
917
2,091
47
Chicago-land
I tried the clapton and the reg kanthal triton minis..

Clapton drinks juice... Flavour no better
Kanthal.. Very similar to regular naughty coils, i did tweak the watts and airflow to have it be more flavour and a bit less airy

I have no plan on switching from the nauti coils. I guess its good the triton ones are there as another option though
 
Status
Not open for further replies.

Users who are viewing this thread