Anyone try the new Kanger T3 yet?
- Thread starter skelley
- Start date
- th_trl_thread_readers 0
- Status
Ego Threaded.
I'm back, after playing with the coil and powering through another 1/2 tank, I had to take a power nap
The center post fits inside the atty much like the CE3, but it's much tighter.
Inside there is a normal short wick/coil and 2 small loose strands on top of the coil.
I use 70/30 PG/VG and removed both flavor strands.
I tightened everything super tight and while vaping it acted like it was on the verge of flooding. (gurgling)
I cranked the volts up to 5v and it was still on the edge. The vapor was really good while the flavor dropped to 'ok'
I added 1 flavor strand and the flavor went back to good and no flooding.
This is where I am going to run mine as I can really crank the volts to it and no flooding.
The wife is not going to mess with hers as she likes everything the way it is.
She likes a cooler vape and is using 3.7v on her new Super eGo VV
I'm back, after playing with the coil and powering through another 1/2 tank, I had to take a power nap
The center post fits inside the atty much like the CE3, but it's much tighter.
Inside there is a normal short wick/coil and 2 small loose strands on top of the coil.
I use 70/30 PG/VG and removed both flavor strands.
I tightened everything super tight and while vaping it acted like it was on the verge of flooding. (gurgling)
I cranked the volts up to 5v and it was still on the edge. The vapor was really good while the flavor dropped to 'ok'
I added 1 flavor strand and the flavor went back to good and no flooding.
This is where I am going to run mine as I can really crank the volts to it and no flooding.
The wife is not going to mess with hers as she likes everything the way it is.
She likes a cooler vape and is using 3.7v on her new Super eGo VV
They have ego cone threading. Yes the threads are on the inside of the skirt.
Edit: Most of our batts have 510/ego threads.
On my 510 box mod, I use a ego adapter. I would recommend the sealed adapter from provape...link.
They cost more than the cheap china adapters, but once you see/feel and use it, it's worth every penny.
Edit: Most of our batts have 510/ego threads.
On my 510 box mod, I use a ego adapter. I would recommend the sealed adapter from provape...link.
They cost more than the cheap china adapters, but once you see/feel and use it, it's worth every penny.
Last edited:
I got mine today as well an I'm on my second refill. They work very very good for me. They are similar to the ce3 in flavor but hold twice the juice and you fill right from the bottle. I think they produce more vapor as well and I had consistant hits all the way to the bottom of the tank. They are a unique designed Clearo and different than any other clearo or tanks I've seen or tried. I agree with the wife they work great right out of the box and I don't see a reason to modify for my vaping. They work very good on my vv ego as well as my Gripper with an adapter.
I bought mine at Kanger T3 EgO Bottom Coil Clearomizer Tank System
I only ordered one to try but after I tried it for ten minutes I immediately ordered some more before the word gets out and they are hard to get.
I bought mine at Kanger T3 EgO Bottom Coil Clearomizer Tank System
I only ordered one to try but after I tried it for ten minutes I immediately ordered some more before the word gets out and they are hard to get.
Last edited:
I thought the same thing to tx, I wanted to immediately order more, but couldn't justify it atm.
I just got another shipment of many T2's w/ another pack of heads that I didn't need and 2 mini novas w/ several extra heads.
I probably have around 200 devices for the zombie apocalypse, but I will be getting more T3 eventually.
Vendors would be crazy not to carry these in mass quantities....lol.
I just got another shipment of many T2's w/ another pack of heads that I didn't need and 2 mini novas w/ several extra heads.
I probably have around 200 devices for the zombie apocalypse, but I will be getting more T3 eventually.
Vendors would be crazy not to carry these in mass quantities....lol.
I got mine today as well an I'm on my second refill. They work very very good for me. They are similar to the ce3 in flavor but hold twice the juice and you fill right from the bottle. I think they produce more vapor as well and I had consistant hits all the way to the bottom of the tank. They are a unique designed Clearo and different than any other clearo or tanks I've seen or tried. I agree with the wife they work great right out of the box and I don't see a reason to modify for my vaping. They work very good on my vv ego as well as my Gripper with an adapter.
I bought mine at Kanger T3 EgO Bottom Coil Clearomizer Tank System
I only ordered one to try but after I tried it for ten minutes I immediately ordered some more before the word gets out and they are hard to get.
I have 6 boxes of CE3s that might collect some dust once I get my T3s.
The reason I ask is because I use an x2 which has ego and 808 threading. So if it has just the skirt threads I can use these.
The one I have won't work on my x2. The T2's do but the T3 bottoms out before the threads can start. The post is just a hair longer than the T2. It works fine on all my ego's but not the X2.
I know exactly what you mean. I have boxes of cartos and clearos I haven't opened yet. I wish I had boxes of these because I think if these hold up I have finally found the one I will be using for a long time at least on all my ego type devices. It does make some of my tube mods a little long for my liking and I hope they come out with a fatter shorter tank with straight 510 connection which I'm sure someone will. I'm pretty sure this design is being copied already because these are going to be very popular when more people try them.
I was considering the Viva Nova Mini, but this clearomizer is sounding so good I just had to order one + replacement head for myself.
The Vision mini nova is good but in my opinion the T3's are better. They hold more juice, produce better flavor, have an ego connection and they are less expensive. They are brand new and we don't know how they will hold up but they seem to be constructed better than the T2 so they should last as well as other clearos. They might not be as easy to clean and dryburn as the Vivi nova being as only the bottom comes off and not the top but very easy to just rinse out with warm water to change flavors.
Last edited:
Yeah, the lack of an eGo connector on the Mini Nova was a stumbling block for me. The T3 has solved that issue nicely.
Also I'm using a eGo Vision V3 Clearomizer now and was looking for similar in a bottom feed without having to go to a cartomizer. The T3 fills that bill, too.
Also I'm using a eGo Vision V3 Clearomizer now and was looking for similar in a bottom feed without having to go to a cartomizer. The T3 fills that bill, too.
Yes the T2 has a replaceable tip and has metal ones but on the T3 the tip is permanently attached to the tank and does not come off.
Everyone that I know that has a T2 complains about it leaking... Hopefully these ones are constructed better
- Status
Similar threads
- Locked
