Just saw this on white stag vapors website and was wondering if anyone has used it yet? It says full ss build and looks to me like the overall quality beats out the aga slightly. I went ahead and ordered one so maybe ill be the pioneer for this little rba. Just wanted to know if anyone else is using one yet?
Anyone use a intuition iatty
- Thread starter 04stinugget
- Start date
- th_trl_thread_readers 0
- Status
Looks interesting. Definitely not much room to drill out a larger wick hole or U-wick capability, but I like the all-stainless construction and glass tank. Not crazy about the center-nut design, though, similar to AGA-T2. And are those threads I see for the cap? Threads make it difficult to line up the airhole with the wick, unless they machine it to line up perfectly.
I'll be interested to see more about this one. Looks pretty solid.
I'll be interested to see more about this one. Looks pretty solid.
I personally hate the center post nuts but I'm thinking about modding my aga after I recieved this one to see if I can make it a screw pos post. I don't mind sanding caps or drilling holes I do it for a living anyway so no big deal to me. For under 30$ I figure some tweaking will be needed. I will give you guys a review sometime next week on this thing once I get it.
Isn't that the typical mini DID clone? In SS
It says 4 ml capacity, if that's the case it's certainly no mini, it looks like a mini though.
It says 4 ml capacity, if that's the case it's certainly no mini, it looks like a mini though.
Last edited:
I'm sorry, iAtty? That is not an iAtty and shame on them for stealing the name. They could have easily made one up themselves...
THIS is an iAtty:
THIS is an iAtty:
Looks like this: Griffin - Stainless - Rebuildable Atomizer
Only the top cap is SS.
I have this DUD: The Vulcan - Rebuildable Atomizer Tank (Satin)
It's decent. Negative screw is tapped loose so don't over tighten. Also the center post and nuts are chrome. Everything else is SS though.
Only the top cap is SS.
I have this DUD: The Vulcan - Rebuildable Atomizer Tank (Satin)
It's decent. Negative screw is tapped loose so don't over tighten. Also the center post and nuts are chrome. Everything else is SS though.
BTW, from what I can tell, i'm pretty sure this is the same "Cobra clone" (I put the quotations because it very, vaguely resembles a Cobra, just the way the tank slides on and off) that has been around for months. Nothing new, though I've heard they work well but aren't as well machined as a DID clone (not that a DID clone is super well machined either).
Thought it looked vaguely familiar. If that's what it is (and it appears to be), they shouldn't be advertising it as a stainless RBA, although they don't really specify that it's "all stainless". It would also be the first Griffin I've seen with a glass tank.
'Tis a shame if that's what it is, but I have to agree it certainly looks like it.
I think this clone is being advertised as a cobra ish clone but it looks to be a mix of the better designs I've seen. The full ss of the Aga the slide over tank of the did the screw top of the did and the single coil connection points if the higher end rbas. Should be pretty sweet to mess with when it gets here.
Ok so quick update. Recieved this yesterday afternoon as I was running out the door to take my wife to have a baby. Got some time to mess with it today and all I really have to say is don't waste your money. The neg connection it literally a smooth post with threads. No grip no screwdriver head no Allen head. Basically it requires needle nose and the threading isn't long enough to run 28ga and be able to tighten it. The top cap almost touches the pos post when snapped on and almost stops the air flow. There is only 1 adjustable nut on the pos post and the post itself is so short that it only allows for 2 full wraps using 28ga kanthal. Half a wrap off the neg plug and 2 wraps above it finishing at the pos post. No room to work and the neg plug gets in the way when trying to wrap your coil making it extremely difficult to get tight. Very very little room for adjustments of the coils once wrapped due to the shortness of the pos post. All In all. Total crap amd not at all what it looked like on the website. Also shipping took a week and was delivered 3 days after the projected delivery date in am envelope. No bubble wrap nothing at all just an envelope. Very disappointed with this.
I emailed white stag vapor and let them know this thing doesn't match their site pics and is basically not even useable. I will update this thread after they get back to me and give me an explanation.
update: White stag emailed me back and asked for pics. So I sent them some nice clear pics of all the things on this device that just aren't right. Hopefully they get back to me quickly and replace it. Looking at the pics on the site vs what I got in the mail I'm hoping they made a mistake and sent me an unfinished product by accident. Again I will keep updating this thread in hopes that no one gets screwed.
- Status
Similar threads
- Locked
