Anyvape Peakomizer 2.0 (new top-filling tank)

Status
Not open for further replies.

drysprocket

Ultra Member
ECF Veteran
Verified Member
Jul 11, 2014
1,128
1,916
Los Angeles
I saw this tank come up in another thread, and it's lack of availability so far has me even more interested; playing hard to get. Also since some models take BVC coils, this could be some Silo competition in my mind.

Details:
anyvape peakomizer v2 | Shenzhen Anyvape Technology Limited
Anyvape Peakomizer 2.0 --A Top Filling AirFlow Glassomizer | Shenzhen Anyvape Technology Limited
(note the multiple versions, with different colors, sizes, and different coil support)

Availability:
kanVape does have some in stock, but appears to be the only US vendor so far:
ANYVAPE PEAKOMIZER 2.0 18mm PYREX WITH ASPIRE NAUTILUS COIL COMPATIBIL | kanVape
I spoke to them over email and they said that they did have a few 22inch versions in stock, but only in Silver. I'm holding out for Black. I've never used them, but they were friendly with my questions over email. Also price is $24.99 for the 18 and 22 inch. I hope that sticks with other vendors.

I saw one 18inch on ebay for $29.99 freeshipping

Reviews:
Anyvape Peakomizer 2.0 - Review | ALL ABOUT E-CIGARETTES UK
Only one I can find, but sounds good.

My concern after doing some research is that their last Peakomizer tank sounds like it had some issues, though they are upfront about that and seemed to address them with version 2.

Is anyone else's interest piqu...I can't do it. But I'm not seeing many posting about this, maybe someone has more info on where/when to get all versions?
 
Last edited:

rocketman29

Super Member
ECF Veteran
Verified Member
Dec 9, 2014
448
2,480
57
Melbourne, FL
I am also very interested in this tank. I actually want a tank with AFC (air flow control) that takes the Non Nautilus BVC coils. The reason is I love the way the BVCs work and taste but don't like the new Nautilus BVC coils with the larger wicking holes.

I haven't tried the new Nautilus BVCs but I am reading the larger holes are causing flooding issues. I have a feeling that my style of vaping will cause them to flood.
 

brickman7

Full Member
Jan 15, 2015
66
33
Gonzales, LA. USA
I have 2 versions of the Peakomizer and one of the smaller P16s. I love these Anyvape series! The top and bottom are connected by a spring-loaded air-stem, allowing for both top filling and bottom filling. This also allows for the use of both Kanger dual coils and Aspire coils. They also make a CeroTank series but I cannot find these.
 

drysprocket

Ultra Member
ECF Veteran
Verified Member
Jul 11, 2014
1,128
1,916
Los Angeles
Good question, I just did a rogues lineup to see....it's not quite as menacing as the full size Silo Tank, but that's mainly due to the drip tip being inverted, which I personally love. Also, since it's black....it's naturally slimming :) My camera sort of sucks, since the perspective is distorted, but these are all lined up by the bottom of the tank.

Left to right is:

-Peakomizer 2.0 (22mm)
-Beyond Silo (22mm)
-Nautilus (standard one, but with that cover)
-Atlantis
-Naultilus Mini (with phallic cover)
-Eleaf Air

IMG_20150318_142658194.jpg
 
  • Like
Reactions: aikanae1

Mactavish

Ultra Member
ECF Veteran
Verified Member
Jan 19, 2010
2,051
3,649
New York
Find it odd this tank is not talked about more online. Granted this "2.0" version is fairly new, but the original AnyVape "Peakomizer", the clear glass tank version has been out for a year, and there is not much buzz about that version either, other then there was a small improvement made early on, then the design changed dramatically to the now covered tank 2.0 versions, that one must select the type of internal atty, before buying. Besides the design and seemingly more parts of the original, the biggest difference I can find, is the original would only accept the Aspire NON-Nautilis "small" atties. I already use those in my Aspire K2 Clearos it was not a temptation to buy. While I own two Aspire Nautilis Minis, I'm always looking for something better. Just ordered the new 2.0 version from KanVape, for $25. It holds .5 more juice at 2.5 ml, compared to the 2.0 ml the mini can take, and the top juice refill option is the MAIN improvement assuming it works as advertised. The new versions require you to make a decision on which type of atties you want to install, and this is the MAJOR difference from the original Peakomizer, since I like the new larger hole, all Cotten Aspire Nautilis coils, I choose the compatible Peakomizer 2.0 tank. Waiting on delivery, hope this is a step up from the now dated Nautilis Mini. Other then these are a bit hard to find online, why is there so little buzz on these?
 

drysprocket

Ultra Member
ECF Veteran
Verified Member
Jul 11, 2014
1,128
1,916
Los Angeles
And just to give a bit of a review update. Mactavish, sounds like you got the 18mm. I truly hope you like you. But er um...

Ok, so I think the 22mm Mega version is my favorite tank of all time. I'm ready to say it's better than the Nautilus, Naut Mini, and Silo. It's just amazing.

However, the 18mm version is pretty disappointing on airflow. Where the 22mm version has fantastic flow, the 18mm just feels too restrictive. I'm just not enjoying it. Also, it's the same height as the 22mm version, as you can see in the pictures below. So there is very little upside, since all you save space-wise is in the width. But if you get the 22mm, you get better airflow, hold more liquid, and it just seems to flow better.

In short, get the 22mm BVC version over the 18mm BVC.


IMG_20150407_210546379_HDR.jpgIMG_20150407_210707587_HDR.jpg
IMG_20150407_210616927.jpgIMG_20150407_210625836.jpg
 
  • Like
Reactions: aikanae1

aikanae1

Vaping Master
ECF Veteran
Verified Member
Feb 2, 2013
8,423
26,259
az
I'm interested even though I'm just now hearing about them. I have a ton of various coils and these sound perfect since I'm also not a huge fan of dual coils but have them anyway (along with various singles and verticals now too).

Found a deal on MFS website however they don't mention whether they are 18mm or 22mm. GRRRRR .... that's one of the most important details! Can anyone here figure out which these are?

Anyvape Peakomizer | ECIG, VAPE, TANK - MyFreedomSmokes
 
  • Like
Reactions: drysprocket

drysprocket

Ultra Member
ECF Veteran
Verified Member
Jul 11, 2014
1,128
1,916
Los Angeles
  • Like
Reactions: aikanae1

drysprocket

Ultra Member
ECF Veteran
Verified Member
Jul 11, 2014
1,128
1,916
Los Angeles
Oh, and I just noticed your link (I'm still not used to the new forum) that link is for the version 1 that came out about a year ago. I hear that it had some issues, but got fixed somehow. I would probably not go with that tank, since it's been improved on, but some people were happy with it. I would research and see what the issues were. I read it somewhere but forget the details.

And I know what you mean about Metal tanks; that's why I got the black, so I can at least have it match somewhat. Too much metal in my vaping life.
 

UncLeJunkLe

ECF Guru
ECF Veteran
Verified Member
Nov 29, 2010
10,617
2
28,644
¯\_(ツ)_/¯
I see that some folks on this thread are comparing or confusing the peakomozer with the peakomizer 2.0. However, they are 2 different types of tanks. The 2.0 (natuilus coil version) is a nautilus type of tank for what I call mid-power/level vaping whereas the peakomizer 1.0 is lower level vaping as it takes the Aspire non-nautilus BVC/BDC coils which are for low power vaping (under 12 watts) like the Aspire CE5, ETS and any other eGo threaded clearomizer tank.

I may jump on the 2.0 someday. I don't care for the look and the printed metal sleeve, kinda feminine looking to me. I wish it looked more like the 1.0 version - that's a nice looking tank!
 
  • Like
Reactions: drysprocket
Status
Not open for further replies.

Users who are viewing this thread