Apex BF Customs

[Roscoe01]

Anybody interested in the mini mutation v4 xs authentics?

 

[Train2]

Dont those bottom airholes pretty much rule out bottom feeding?

Anybody interested in the mini mutation v4 xs authentics?

 

[inswva]

Anybody interested in the mini mutation v4 xs authentics?

I might be down for one pending some feedback... I oversquonk like a insane person. I had to ditch my Freakshow Mini due to wearing more juice than I was vaping. I seem to not deal with bottom or top air very well.

 

[Roscoe01]

I might be down for one pending some feedback... I oversqounk like a insane person. I had to ditch my Freakshow Mini due to wearing more juice than I was vaping. I seem to not deal with bottom or top air very well.

The bottom holes can be plugged with the included silicone plugs if one desires.

 

[Train2]

The bottom holes can be plugged with the included silicone plugs if one desires.

Ahhh... didn't see that. I'm on my phone and HATE looking at stuff on my phone. ..

 

[Papa_Lazarou]

I might be down for one pending some feedback... I oversquonk like a insane person. I had to ditch my Freakshow Mini due to wearing more juice than I was vaping. I seem to not deal with bottom or top air very well.

You and me, both, brother. Loved the FS mini, hated the stigmata-like outpouring of fluid. I like me a good ol' squonk, I guess. Had the same problem with the Magma (even with the needle hack) and Vengeance.

Funnily enough, I've not had the same issue with any side air atty other than the Bonsai (of all things), so I guess my high water mark is bottom of the coil(s).

ETA: I'm also thinking that the smaller (multiple) side holes on the Mut will help with leakage - what with surface tension and all.

 

[Mark Todd]

Saw that, looks like he made it way more complicated than it has to be...

I totally agree there, a review I am not proud of

 

[RobbieVape]

One to consider maybe for the mtl albeit 22mm is the UD IGO-W but air draw is supposedly tight. Has anyone used it?


Sent from my iPhone using Tapatalk

 

[element77]

I have an IGO-W
It sits on a REO with .5 duals and the clear cap. I find it a very loose draw, but consider the source, I'm used to single 1/16" airholes on IGO-S's
It works better than a lot of 22mm attys I've tried, but for me its just a huge space in there.
I like the manta or atomic, way better.
I've been chasing clouds lately for some fun anf experience, so lots of new builds outside my comfort zone.
Current favorite is dual .19 in an atomic.
I hated the atomic when I got it a year ago, but I had a dual .5 build in it.
The vapor production is IMO obnoxious. People are always looking for the fire or think a car has overheated. I can only use it at home. But I haven't got it out of my system yet.

 

[Roscoe01]

I have an IGO-W
It sits on a REO with .5 duals and the clear cap. I find it a very loose draw, but consider the source, I'm used to single 1/16" airholes on IGO-S's
It works better than a lot of 22mm attys I've tried, but for me its just a huge space in there.
I like the manta or atomic, way better.
I've been chasing clouds lately for some fun anf experience, so lots of new builds outside my comfort zone.
Current favorite is dual .19 in an atomic.
I hated the atomic when I got it a year ago, but I had a dual .5 build in it.
The vapor production is IMO obnoxious. People are always looking for the fire or think a car has overheated. I can only use it at home. But I haven't got it out of my system yet.

Wait till that mephisto v2 gets in your hands! It's crazy obnoxious. I left my .17 24g nichrome build in there for you[emoji91] I'm not liable if your reo spring turns into a pancake[emoji23] I am sad to see that atty go. I will be ordering a couple more soon ;-)

 

[element77]

That .19 atomic is on my REO, and no problem whatsoever, however it does spark like a lightning bolt, even with deoxit gold applied often.
Thanks for leaving the beast coil in there, will be lots of fun.
These darn kids at the vape shop finally ...... me off enough to apply myself at clouds, now they're going to see what the dagobah system looks like

 

[NatGasMan]

Buhawi interest list (10 on the way)

1- marshallb... copper for the avion
2- roscoe01 ...copper
3. Robbieblood ...SS
4.AllPepperS.....copper
5. element77......brown (interesting)
6. RiverNut...copper
7. NatGasMan...SS
8.
9.
10.


Note: 4 copper, 1 brown, 5 SS ordered

 

[McPuff]

Anybody interested in the mini mutation v4 xs authentics?

i just watched a review or 2 on that. looks like something worth trying. depending on price... i would give it a day in court

 

[McPuff]

how is 004 avion going?

 

[Roscoe01]

Slowly. Still getting healed up. Hope to be back after mod making shortly.

 

[McPuff]

gotta let that heal up right.

 

[Henry Etta]

I totally agree there, a review I am not proud of

I say that as someone who has mastered the Nuppin build, which also can be complicated, but once you figure it out, it's not bad at all. That Desmo looks like it could be similar if you just get the coils rolled the right way to begin with. My biggest concern is the quality... definitely looks a bit janky.
Any review is a good review in that it at least gives you a close look at the insides.

 

[RiverNut]

Got my Forge yesterday. Thank you Roscoe

Did a quick build and for some reason decided to try 3mm id with 26g. Dual came out to .51 which is as low as I've ever gone.
Call me a wimp but I don't get how you guys are doing lower than that. Flavor is in your face but even with only one hole on each side, it's too much airflow for me. So I'm gonna try a single tonight and get it back up in my normal .9 range. It squonks and drains like crazy. First impression-I think this will be a keeper
Great job Roscoe

 

[Loopy1224]

Hi Roscoe. I am on the Forge list but didn't realize it was time to pay. Would you let me know the procedure? Oh and make sure you take care of that hand!! Thanks

Sent from my SM-N910V using Tapatalk

 

[Roscoe01]

Got my Forge yesterday. Thank you Roscoe

Did a quick build and for some reason decided to try 3mm id with 26g. Dual came out to .51 which is as low as I've ever gone.
Call me a wimp but I don't get how you guys are doing lower than that. Flavor is in your face but even with only one hole on each side, it's too much airflow for me. So I'm gonna try a single tonight and get it back up in my normal .9 range. It squonks and drains like crazy. First impression-I think this will be a keeper
Great job Roscoe

What top cap configuration are you running? I prefer the 510 adapter only for shorty setup with a stubby wide bore tip. Seems to really bring the flavor out.