getting real sick of your stuff carl.....
I'm loving this a lot!
looks great. hows she performing compared to teh V1?
Aromamizer RDTA by Steam Crave
- Thread starter roxynoodle
- Start date
- th_trl_thread_readers 0
- Status
looks great. hows she performing compared to teh V1?
All right friends. What am I missing? I'm having to flip my aromamizer completely over to get it to put juice down in the well. Otherwise after a few pulls I'm getting a dry hit. I've tried vertical, horizontal, and various thicknesses and lengths of rayon. Any ideas?
You mean you have to flip it upside down to get the juice flowing? That's weird, especially since the Aromamizer is less dependent on the vacuum to regulate juice flow than most tanks. Nothing about your build looks particularly out of the ordinary from what I can see. Have you verified that the juice and airflow channels are all properly milled in your middle piece (the one you screw the build deck into)? That's the only thing I can think of, but I feel like it'd be pretty obvious if your juice channels weren't through-and-through.
I haven't checked each and every hole, but I will. Seems if that were the case is have trouble filling, which I haven't. Who knows.
I do. I've got the two holes that are aiming at the posts completely blocked off on all of our 'mizers using silicone plugs.
I'm loving this a lot!
I'm trying very hard not to fall prey to one or two of the "Deadly Sins"!!!!!
Yeah it would be strange. The only other thing I can think of is to check the o-ring in the top cap. It's well molded to its channel and clear, so it was a week or two before I even realized one was there. Normally it's pretty stable, but it slips out now and then. You may have unknowingly rinsed it out at some point, or maybe it's damaged, and that could be interfering with the vacuum enough to cause juice flow issues.
Maybe. I was trying to get it all apart earlier to give it a thorough inspection and so far the only parts I can get off are the base and the drip tip. Lol. I'm not giving up yet. Too many people love this tank for it to be this bad.
Got the bits apart... Everything seems right with the o rings... I haven't a clue why I'm still having wicking issues.
Lift the coils, fluff the rayon to sit on the little ledge in the deck and cover it completely, don't stuff or block the wicking holes. Other than that I have no advice. I use cotton and my builds have way more wicking material mass than yours, so that's the only thing I can see being a problem. Good luck.
Ok I know... Late to the party but, I just got my first aromamizer in the mail today. After a good wash I've tried a couple of builds so far ( super easy). I must say I don't know why I didn't try this thing sooner. Great tank solid built great capacity (got the 6 ml). Excellent vape and from what I can see should be pretty leak resistant. Not crazy about the vape band AFC. I have the two hole one on there now. Definitely gonna have to try the new supreme for the top fill and built in AFC. I can't find any fault with this RTA. Big [emoji106]
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Just to clarify that the latest pic posted is the v2 and not Supreme.
Regarding Supreme's juice control, I'm currently using it as a 'on off' switch to prevent leak when refilling. After refilling, I'll just switch it to max.
To be honest, the tank is a whole new beast and I'm still working to find my sweet spot. The tank performs great..the wicking is much more forgiving due to larger juice feeds and the deck is huge giving a much larger space for complex coil builds.
I feel that the vape is so much more smoother but that might just be my own imagination...lolgetting real sick of your stuff carl.....
looks great. hows she performing compared to teh V1?
The v2 vapes awesome. As the changes are aesthetic...the performance should be the same minus the hassle of correcting the vape band after refilling. The metal afc functions very well.
Eagerly awaiting the Supreme to go up for sale for preorder! Going to be checking at around midnight and throughout the night! Wondering though if someone could clarify, Isn't the Supreme alittle wider than the Aromamizer V1? How many MM is the Supreme compared to the Aromamizer V1 and V2? Thanks because I know the Aromamizer V1 just barely fits on top of the Box width wise without going over the edge. So assume the Supreme would hang off the sides a bit. Not really concerned though at how my Box and Tank Look together only thing that matters to me is performance. Hoping the deck is even larger than my Mutank which is my current biggest deck to build on. If so that would be amazing, we're talking 3.5mm coils(perhaps spaced) with thicker gauges of wire(22G, maybe even 20G!)
m00shie, not sure if you've vaped on the V2 or the Supreme enough, but how long is each tank of juice lasting compared to the V1? Wondering if the V2 and the Supreme sucks through juice quicker? If Im not mistaken only the Supreme has bigger feed holes though right? The V2 internally is the same thing as the V1(same size deck etc) Meaning ultimately only difference is a few cosmetic things(removing the nipple and a metal AFC band)
Can't wait to get a Supreme, maybe even a V2, hopefully start seeing some youtube reviews soon of the new tanks!
m00shie, not sure if you've vaped on the V2 or the Supreme enough, but how long is each tank of juice lasting compared to the V1? Wondering if the V2 and the Supreme sucks through juice quicker? If Im not mistaken only the Supreme has bigger feed holes though right? The V2 internally is the same thing as the V1(same size deck etc) Meaning ultimately only difference is a few cosmetic things(removing the nipple and a metal AFC band)
Can't wait to get a Supreme, maybe even a V2, hopefully start seeing some youtube reviews soon of the new tanks!
They are supposedly going to make an upgrade kit available to go from Aromamizer v1 to v2, so shouldn't be out too much money to get a real afc ring instead of the rubber band.
V2 consumes the same amount of juice as v1. As for Supreme, the juice consumption is higher but mainly depending on your coil build and air flow used.
The v2 has the same internals. The difference is metal afc ring, flat top and a 'straight-flow' drip tip.
As for size, both v1 and v2 are 23mm. Supreme is 25mm.
Here's a size comparison:
That's not a v2. It's my v1 with trea mink drip tip that sits on the nipple.
- Status
