Artery vapor Nugget box mod/50W TC/SMALLER than the COV Mini Volt!
- Thread starter XspidermanX
- Start date
- th_trl_thread_readers 0
- Status
looks like vapingmall is joining the price gouging game. went from $52.08 to $75.99. thanks vapingmall.
Still waiting on mine :/
From the looks of it, the SS kit is to be sold in the 70-90$ range and the SS battery alone (if found) for 40-50$
The zinc alloy versions in other colors should be priced lower.
From the looks of it, the SS kit is to be sold in the 70-90$ range and the SS battery alone (if found) for 40-50$
The zinc alloy versions in other colors should be priced lower.
Arived, and playing with it now. 
First tc mod so I cannot compare accuracy, but seems to be working well.
Later tonight going to see if the ss wire tc update is avaliable.
First impressions: little heftier compared to mini volt, and boxier, but I prefer the look/feel over the volt. **Finger print magnet** beware**. Included tank is "nice" but seems muted in flavor, hoping the coils are easily rebuildable otherwise the tank Is disposable imo.
Update later
First tc mod so I cannot compare accuracy, but seems to be working well.
Later tonight going to see if the ss wire tc update is avaliable.
First impressions: little heftier compared to mini volt, and boxier, but I prefer the look/feel over the volt. **Finger print magnet** beware**. Included tank is "nice" but seems muted in flavor, hoping the coils are easily rebuildable otherwise the tank Is disposable imo.
Update later
Temp control seams to kill the battery fast. It is my first temp controll mod so I may have to play with settings, but compared to a build that outputs similar results running in power mode, tc is overkill.
Does not come shipped with ss temp mode
Update is not avaliable yet
Using it out the box, set at 50w and 540°f it eats thru the battery. First experience with temp control mods so that may need tweaking for better results. Otherwise in temp mode, it seems to last as long as the mini volt, if not slightly longer(with lower resistance).
With the mini volt at half charge, a .5 build at 30w will fire for a half a second before saying battery too low. The nugget will take the same build and fire the 30w till the battery gauge is literally empty
Few quirks: in tc mode, changing temp downwards it eventualy round Robbins into the "opposite" temp setting. F changes to C and vice versa, but does not change when increasing voltage, only when decreasing.
In the menu, there is an "exit" selection, if you have the screen on the "firmware version" it also acts as the "exit" selection.
In the menu, there is an "exit" selection, if you have the screen on the "firmware version" it also acts as the "exit" selection.
Also, in a German pdf, the older versions have/had a "stealth mode" - screen does not lite when firing - and was apparently removed from the firmware in future update/revisions. Makes me wonder why it was taken out? I'd love to see that feature to save some of the precious battery life.
Besides tc (since I only have the one coil that came with the kit), I'm really enjoying this mod, expecially vs the mini volt. The quicker charge time really takes the cake.
Also new to me is the fact it locks the resistance of coils - burden to some who swap tanks alot, but I like it, it ensures a consistent vape as the board is not chronically doing math to supply the power shown on screen due to slight flux in heated coils
Also new to me is the fact it locks the resistance of coils - burden to some who swap tanks alot, but I like it, it ensures a consistent vape as the board is not chronically doing math to supply the power shown on screen due to slight flux in heated coils
glad to read you like the nug. i sent an 'i'm so poor email' (sadly i am) to vaperoyalty asking if i could get a discount on the kit and they said they would give me 10% off the kit. if i have the cash, i'm gonna join the nugget club.Does not come shipped with ss temp mode
Update is not avaliable yet
Using it out the box, set at 50w and 540°f it eats thru the battery. First experience with temp control mods so that may need tweaking for better results. Otherwise in temp mode, it seems to last as long as the mini volt, if not slightly longer(with lower resistance).
With the mini volt at half charge, a .5 build at 30w will fire for a half a second before saying battery too low. The nugget will take the same build and fire the 30w till the battery gauge is literally empty
really liking the bell cap on you kayfun. mods looks nice. so at 30 watts, about how long would you say the batt lasts?
Tbh it is very similar in runtime compared to the mini volt, maybe slightly less.
I get around 4mls - 2 tanks- on the mini volt before charge, I honestly haven't payed attention with the nugget.
Yes it is spring loaded.
I just got mine today and am having problems. I put it on voltage (and tried power) mode and tried to use it with my playboy tank (also tried the COV Vengeance tank), it reads the ohms just fine but when I fire it, the voltage/wattage zero out and it doesn't fire up. Any ideas or suggestions?
So let me get it straight...
Asking a few questions to gauge the situation...
Atty on, resistance reads fine, you have a number set for volt/wattage mode. You press the button, screen blinks and shows 0 for the number "of the set volt/watts"?
When holding the button, does it just display 0 for the entire 10 seconds before the over puff cut-off kicks in and displays?
Also if you don't mind posting your "software version" - it seems every unit shipped, I've seen different numbers :/ I have yet to come across 2 nuggets with the same firmware. And they have yet to still post an update for the mod on their OEM site.
The screen shows PM (Full Battery), 35W, 0.00 V, 0.22 Ohms... When I click it, the readout changes to 0.0 W, 0.01 V, and the ohms remains the same. It stays at that reading for the 10 seconds then the Voltage drops to 0.00 V. Soft Version 100201 602271.
Edit.. I have tried this on 3 tanks now and one RDA running Kanthal 28g, reading at 0.8 Ohms.. Same result
Edit.. I have tried this on 3 tanks now and one RDA running Kanthal 28g, reading at 0.8 Ohms.. Same result
- Status
Similar threads
