Artery vapor Nugget box mod/50W TC/SMALLER than the COV Mini Volt!
- Thread starter XspidermanX
- Start date
- th_trl_thread_readers 0
- Status
The will get the early adopters and suckers, but when the other sites offer it at a reasonable price, they won't get much repeat business as no one likes to get ripped off. Can't recall if I ever ordered from them, but I'm going to avoid them, if gouging is evident.
I've never ordered from them and somehow ended up on a mailing list. There prices have never been competitive but they normally get product early on so it's good to get their e-mail because I know a reasonably priced supplier has or will get them soon.
Still waiting 
I'm really hoping the kits are sold elsewhere for cheaper than madvapes has them stocked, or the batteries themselfs will be stocked somewhere.
I'm really hoping the kits are sold elsewhere for cheaper than madvapes has them stocked, or the batteries themselfs will be stocked somewhere.
20 amps on an 18350! Really? It must be some kind of lipo, right?
Sent from my M7_PLUS using Tapatalk
Sent from my M7_PLUS using Tapatalk
lol........yes ken it's a lipo. i was lookin around for a high amp 18350 and could find none. i was going to make my nugget, when i get one, battery replaceable. so now my search will include a high drain tiny 3.6v lipo.
well defdock, i found a website that is selling the entire kit for $52.08. that's more reasonable that madvapes at least. www.vapingmall.comStill waiting
I'm really hoping the kits are sold elsewhere for cheaper than madvapes has them stocked, or the batteries themselfs will be stocked somewhere.
I can't seem to make it past the registering proscess to even place the order
sent an email and still waiting.
huh, weird........i have the kit sitting in my shopping cart. i have an account from last year when i ordered their hammond version of the dna200. why isn't it letting you register? maybe you're filling a field in incorrectly? are you in a state that vapingmall won't ship to?I can't seem to make it past the registering proscess to even place the order
All info correct, I click the "next" button and then it just sits and said loading. Click a few times and it says the verification process failed. Maybe because I'm on a mobile device it's having a glitch. I don't have access to a desktop until I'm back home tomorrow
Talk about "vaporware", their website is still parked. On 3FVape site you can get a Cuboid for $40. I'll get one of these when the price hits $30, not before. But please, everyone else buy one, so I can see if it's good, or a POS!
my ESP tells me it's a winner. therefore, it's a winner. trust and believe people.
things will start moving very soon. especially over in china. i expect to see the nugget for about $40 very soon.
things will start moving very soon. especially over in china. i expect to see the nugget for about $40 very soon.
I sent them an email when fasttech got off break :/ assuming a few companies were atleast back.
I wrote:
Reply
I wrote:
Reply
I wrote:
Reply
I wrote:
Reply
wow, madvapes are a bunch of scumbags trying to make a quick buck. i'd send them an email defdock. askin what's up with the price gouging.
edit.......maybe madvapes has some sort of coupon code we're missing????? if one is found that brings the price down CONSIDERABLY, i will retract my above scorning of madvapes.
edit 2......i just checked my spam folder and i did get a response from artery on Jan 27. here it is.
Good evening!
I am Sam, glad to receive your inquiry about our Nugget box mod!
We are the manufacture of this smallest device, you can directly buy from us.
The Nugget box mod has 2 kinds material: stainless steel and zinc alloy material, price is different!
Sample price: ss: 35$, zinc alloy: 24$. Our Moq is 5-10pcs, how many do you need?
By the way, we also have the kits: gold rush kit, which includes one 2ml 49er tank, one Nugget box mod!
Is it the kit suitable for your taste too?
Hope to talk more details with you!
Last edited:
I knew it!
Regardless, I did send madvapes an email, and I also sent a price match. Seems they sold out :/ jerks.
For those interested, I was successfully able to purchase a Gold Rush Kit from VapingMall (I think I got really lucky and came across it the day they listed them as available) and I received it about 4 days ago. It cost me $52 with free shipping and it seems as if VapingMall keeps them in their direct inventory because the mod shipped from either NC or SC and I received it in WA State about 4 days later. If you're interested in one, I would definitely hold out until they get more in-stock, rather than buying them at the ridiculous $70+ price point madvapes wants.
$52 honestly isn't a bad price at all for this setup when you consider it's more capable than the Mini Volt and the Mini Volt full setup sells for around the same price (Mod + Vengeance tank)
The mod has so far actually blown my expectations out of the water. I haven't had any issues what-so-ever with the mod. I took it out of the box, primed my coil, filled up the tank, put the tank on the device, set the device to wattage mode and boom, functioned without issue.
I've been using the mod with the 49er tank and 0.5ohm Kanthal coil as well as a Derringer Clone with a 0.4ohm build on it and both work great. The mod has one of the best coil detection systems I have ever seen. Whenever you screw in a new atomizer the device immediately asks if it's a new coil or old coil and doesn't allow you to proceed without selecting an option. Build quality is better than expected. No odd defects, scuffs or even button rattle. The battery life is also a lot better than I had expected. Oh and the menu navigation on this device is actually superb. It's extremely easy to switch between wattage, TC Ni and TC Ti. It's also super easy to set the sleep time or turn the sleep function off completely. I'd love to see these guys make some full-sized, higher wattage mods with whatever chip and menu system their using because it's actually very good.
The 49er tank has also exceeded my expectations. I haven't messed around with the tank that much, but that's part of the beauty...it just works and it works well! The top fill design on this tank is simple...but it has some of the largest fill ports I have ever seen on a top fill tank. You could fit any dripper or bottle tip in the fill ports and fill it up. You could almost fill a turkey baster with ejuice and fit it in the fill ports. I'm getting great flavor from the 0.5 Kanthal coil in the tank and the coil heads are not leaking. Wick holes on the coils are pretty huge as are the juice control ports within the tank, so even when chain vaping back to back I haven't gotten any dry hits. I think I like this 49er tank more than I like the Kanger Subtank Mini and that's saying something.
I've only had it for four days, so it's not yet possible to tell if it has any sort of long-term issues, but at this point I am fairly confident is saying that the device and tank are worth buying.
The only issue I can think of off-hand is that I cannot find a source for replacement coils for the 49er tank. I'm also unsure if there's any other manufacturers coils you can use within the tank, so that may prove to be an issue pretty soon.
I wish I could help you with that, but I have yet to mess with the temp control. I actually don't have any intentions to mess with temperature control until the stainless steel update is available. It came with an Ni200 coil but I avoid the use of Nickle coils as much as possible. I have some stainless steel sitting right here ready for a simple build though.
- Status
Similar threads
