Artery vapor Nugget box mod/50W TC/SMALLER than the COV Mini Volt!
- Thread starter XspidermanX
- Start date
- th_trl_thread_readers 0
- Status
From your firmware version displayed in the picture, your 1910 updates ahead of my SS model 
Nice to see yours came with ss tc, so it means they have finished it. When I email staff they cannot deny releasing the update "because it isn't finished" - there is proof!
Nice to see yours came with ss tc, so it means they have finished it. When I email staff they cannot deny releasing the update "because it isn't finished" - there is proof!From your firmware version displayed in the picture, your 1910 updates ahead of my SS model
Well. No. Their website says efun.top never got original product from them.. iow I shouldnt have an authentic nugget..
you see that def! they finally put SS in the firmware. now the question is, "how is the SS TC on this device?" might have to visit efun. i really don't need this mod, at all. i have the extra dough though, so i might as well just get it.From your firmware version displayed in the picture, your 1910 updates ahead of my SS model
i can almost guarantee you have an authentic nugget. just like fasttech, efun get their product from suppliers at a very low cost and they can't disclose who the supplier is for fear of getting them in trouble and not beiñg able to offer us low prices. SMY says the same thing about their products sold from fasttech. "could be counterfeit" lol, ya ok SMY, nice try.
@cowfood I have a question for ya since you have a more recent firmware, if you can test it for me please.
The nugget is my only tc mod, so I dont know alot about that subject.
I left it in tc mode with the supplied tank, and then swapped to a rta with kanthal, completely forgot about tc mode and it STILL FIRED at the set watts for tc... the temperature didn't show up, but it shows 20w (whatever is set) being supplied when you fire the mod.
Can you check and see if that still occurs?
For tc mods, I expected an error message or something. Seeing as the coil was 1.2ohms, I didn't expect the tc mode to opperate....
The nugget is my only tc mod, so I dont know alot about that subject.
I left it in tc mode with the supplied tank, and then swapped to a rta with kanthal, completely forgot about tc mode and it STILL FIRED at the set watts for tc... the temperature didn't show up, but it shows 20w (whatever is set) being supplied when you fire the mod.
Can you check and see if that still occurs?
For tc mods, I expected an error message or something. Seeing as the coil was 1.2ohms, I didn't expect the tc mode to opperate....
Well I got an email back attached was their "lastest" firmware. Now to find a usb cable with data transfer capabilities.
Update in a moment
attached was their "lastest" firmware. Now to find a usb cable with data transfer capabilities.Update in a moment
Well, with a kanthal atty, herakles hydra, 1.8 ohm I was able to fire it in SS tc with 25 watt limiting, for 4 seconds, it then popped into power mode at 30 watts. Same happened in ni mode. This is the chip saying nope, wrong coil. Did this with a nautilus mini, 16 watts max, popped into 30 watts power mode, oof.. anyhow, not a problem, expected behavior
CF
So it was a bug. Good to know and thanks.
The update sent, I couldn't seem to install, not sure what the deal is yet :/
The update sent, I couldn't seem to install, not sure what the deal is yet :/
Last 4 digits of the software was in the 3000 zone I beleive. When I have access to the pc again, Il post it.
I think my issue with updating is with Windows 10 and the stupid "8 seconds of connection" ,code on the nugget, before it disconnects from the pc.
I think my issue with updating is with Windows 10 and the stupid "8 seconds of connection" ,code on the nugget, before it disconnects from the pc.
A file just popped up at
Support_Artery-Electronic cigarettes,E Cigaretets,E-cigs,Mods, Atomizer |Artery Vapor
called 'Nugget Box mod upgrade firmware Download'.
~18MB. Filename is ARTERY_NUGGET_2016031801.zip.
It appears to contain a firmware file called ARTERY_NUGGET_USER_2016031801.BIN.
Looks like fun!
Support_Artery-Electronic cigarettes,E Cigaretets,E-cigs,Mods, Atomizer |Artery Vapor
called 'Nugget Box mod upgrade firmware Download'.
~18MB. Filename is ARTERY_NUGGET_2016031801.zip.
It appears to contain a firmware file called ARTERY_NUGGET_USER_2016031801.BIN.
Looks like fun!
If you can get it to install, please update us lol. I followed the instruction in the pdf file and I couldn't get it to work
I think I found the problem with the firmware update: Amazon.com: Plugable USB to RS-232 DB9 Serial Adapter (Prolific PL2303HX Rev D Chipset): Computers & Accessories
Or at least, the driver for the com port use is for this type of cable. Or, the special cable really is a special cable where the pinouts match that of a rs232c rx/tx on the mini usb female connector inside the mod, and the pl2303 rev D chip is in there..
Or at least, the driver for the com port use is for this type of cable. Or, the special cable really is a special cable where the pinouts match that of a rs232c rx/tx on the mini usb female connector inside the mod, and the pl2303 rev D chip is in there..
Last edited:
There is a file in the folder to install a driver so you don't need that cord.
The issue is with the cord tho I beleive. They come with a "charging only cable"(2 pin), and from what I understand there are 3 different types of "data cables"(5 pin).
Most device makers use the same "pin layout" but there are few that like to switch it up :/ I personally have 2 cords with different layouts, but I don't have the 3rd type which I'm assuming is what artery used...
If the representative emails back, I'm going to see about the situation :/
Well, I installed the driver, infact even tried the latest version for windows 10. Went looking in cntrl panel for the new com lpt section, or an "other" section nada, not available. Of course my laptop does not have any rs232 ports. Used the checker tool to see if any of the com ports this driver opens opened, nothing.. Im using a known good data cable, so yes, I am in agreement its a proprietary data cable needed.
CF
The complexity involved just to install this fw update points further towards a special cable ... I have 3 nuggets, 2 of which need the new firmware so I am interested to see this resolved too.
CF
... I have 3 nuggets, 2 of which need the new firmware so I am interested to see this resolved too.CF
Last edited:
- Status
Similar threads
