Atmistique Atomizers

[qorax]

1. Nice work Stan thanks a lot for your time . Its correct
2. Exactly, BilleBox users must go to flangless base
3. You will not have any problem because the holes are in the bottom of the tank and when liquid level is low it will still feed the atomizer while you make a move to vape. We test it many times and always without any feeding problem.

Cool. Done deal. Now waiting

 

[Konstantinos]

1. are the center pins from v1 compatible with v2?
2. will we be able to buy spare tubes (if we buy the standard 35mm diver v2, can we add on an xl tube, or an enezlis tube? looks like you said you can buy spare tubes!!!!!! awesome.

thank you K! so excited.

V2 can take V1 brass pin BUT V1 cant take the new ss pin because the V1 acetals have smaller hole
Spare tubes will be available in about three weeks

 

[Firestorm]

Good call on offering spare tubes. I'm going for a standard Enezlis with SS pins myself.

 

[digitals]

Assuming I missed the announcement, when will the availability begin?

 

[Konstantinos]

Set-up Diver V2

 

[qorax]

V2 can take V1 brass pin BUT V1 cant take the new ss pin because the V1 acetals have smaller hole
Spare tubes will be available in about three weeks

Hi K, I'm thinking of opting for the 'brass pin' in the base ~ believing that brass would be more conducting than SS.

As per your above statement it seems that the SS pin is a bit wider than the brass pit ~ will this cause any serious issues? I mean, will putting the brass pin instead of the SS pin create 'gaps' in the base promoting leakage?

 

[qorax]

Set-up Diver V2

Awesome! Can we also have a short vide of the Diver v2 being positioned inside a tank please?

 

[qorax]

~ Deleted ~

 

[Konstantinos]

If you want to see how it looks: for example the Enezlis tube:

 

[qorax]

If you want to see how it looks: for example the Enezlis tube:

View attachment 273498

Which is Driptip is that, K? That combo is lookin' gr8

 

[raqball]

Think I might just need 3 or 4 of the Standard 35mm flanged Diver V2's

 

[nightfell]

I think that drip tip is the yeller, it's only been out for maybe 2-3 weeks. Missed the release by a couple of days last time I ordered.


Sent from my iPad using Tapatalk HD

 

[Firestorm]

Yeller: http://www.atmistique.gr/en/driptip...page_images.tpl&product_id=544&category_id=44

 

[finagle69]

I'm glad the micro coil made a cameo in the setup vid. Its all I use now.

Sent from my HTC One using Tapatalk

 

[Kataphraktos]

While ya'll re drooling over the v2, I spent the last couple of days putting my new Kanthal A-1 28g to good use. I installed 1.3-1.5 ohm microcoils in all of my attys (except drippers, those are next).

The Diver v1 microcoils are amazing, a meaningful upgrade from a regular build. This will be my new coil for all attys.

 

[Kataphraktos]

Not sure if it will work, but you just KNOW I'm going to leave the extra wick hanging out of the sides of the v2 into the bottom of the tank, filling my SnP with SS tube with fluff, and trying to build a 22m Diver/Spheroid Frankenstein's Vape Monster - my Holy Grail, the Diveroid.

 

[qorax]

Not sure if it will work, but you just KNOW I'm going to leave the extra wick hanging out of the sides of the v2 into the bottom of the tank, filling my SnP with SS tube with fluff, and trying to build a 22m Diver/Spheroid Frankenstein's Vape Monster - my Holy Grail, the Diveroid.

Not sure why you'd want to do that. The filler material is used to "auto-drip" juice from "top", in a top-feeder setup. In a regular tank the juice will always be there (at the bottom) to moisten the wick.

 

[Konstantinos]

I made this setup (wicks out of the Diver) with almost the same results. Possibly it will helps in high voltage.

Tasos make microcoils these days and he is very satisfy with the final result. The problem for me is that they need more time to make them. I personally prefer the traditional way, i am too old for these

We try these days to make the new Grail and its not so easy because we try to keep the same price and the new higher base doesnt help us at all :-(

 

[qorax]

I made this setup (wicks out of the Diver) with almost the same results. Possibly it will helps in high voltage.

Tasos make microcoils these days and he is very satisfy with the final result. The problem for me is that they need more time to make them. I personally prefer the traditional way, i am too old for these

Actually K I find microcoils are easier and faster to make. It takes the deliberation out from rolling and spacing the wraps ~ since you are conjoining them. Besides, it does make 'maintenance' of build a nippy ~ b'coz I don't need to change the coil (for a long long time)... just dry burn it and replace the wick. Can't be easier / happier.

 

[qorax]

BTW, is the Enezlis and the Standard sized Diver v2 of the same dimensions?

I mean, are they both 35.5mm long, with the same OD (except for the coned section)? I ask b'coz I want to know whether it would fit all 35mm tanks, and not made just for the Billet Box.