Atomizer Low???

[MrVapePineapple]

I have the I stick 100w with 0.15 ohm coils. It keeps giving me the atomizer low screen when I attempt to fire. It is reading the ohms at 0.14. How can I fix this???? I don't wanna waste a new cool yet and I'm afraid the same thing will happen to that one. Please help!

 

[retired1]

Some coils have minor differences, which is normal. You'll need to try a new coil.

 

[thomas l]

i would agree with retired1

 

[Scy123]

The istick 100w has a resistance range of 0.15 to 5.0 ohm. You will need to buy higher ohm coils.

 

[zoiDman]

I have the I stick 100w with 0.15 ohm coils. It keeps giving me the atomizer low screen when I attempt to fire. It is reading the ohms at 0.14. How can I fix this???? I don't wanna waste a new cool yet and I'm afraid the same thing will happen to that one. Please help!

Someone who has an iStick 100w should answer your Question. But I believe the iStick 100w has an Ohm range of .15 ~ 5.0 Ohms.

The iStick 100w TC has a Resistance Range of...

• Resistance: 0.1 - 3.5ohm for Variable Wattage

• Resistance: 0.05 - 1.5ohm for Temperature Control

So you can use a .15 (or so) Ohm coil in it.

BTW - Welcome to the ECF.

 

[suprtrkr]

Hi and welcome. That's probably the answer. Mods are generally not all that accurate when measuring resistance. Using a coil exactly at the low atomizer cutoff can be a problem.

 

[Rabbit Slayer]

The iStick 100w TC has a Resistance Range of...

• Resistance: 0.1 - 3.5ohm for Variable Wattage

• Resistance: 0.05 - 1.5ohm for Temperature Control

So you can use a .15 (or so) Ohm coil in it.

A) If he has the TC version
B) and if he is using NI200 coils

 

[zoiDman]

A) If he has the TC version
B) and if he is using NI200 coils

I'm not 100% Positive what Mod the OP has? But they Didn't mention it being a iStick 100w TC.

And if it was, a .14 Ohm coil should have Not thrown an error. In either TC or in Wattage Mode.

 

[BrotherBob]

Welcome and glad you joined. 40TC here-No help.

 

[Scy123]

The non tc one has a cut off of .15 Ohms. That must be what he has.

 

[zoiDman]

The non tc one has a cut off of .15 Ohms. That must be what he has.

It sounds like it to Me.

 

[Rabbit Slayer]

And if it was, a .14 Ohm coil should have Not thrown an error. In either TC or in Wattage Mode.

opps, my brain saw .015 for some odd reason

 

[zoiDman]

opps, my brain saw .015 for some odd reason

No Worries.

I do that sometimes. In My case, I think it is a factor of How Many Candles were on the Birthday Cake last year.

 

[skullblade789]

Someone who has an iStick 100w should answer your Question. But I believe the iStick 100w has an Ohm range of .15 ~ 5.0 Ohms.

The iStick 100w TC has a Resistance Range of...

• Resistance: 0.1 - 3.5ohm for Variable Wattage

• Resistance: 0.05 - 1.5ohm for Temperature Control

So you can use a .15 (or so) Ohm coil in it.

BTW - Welcome to the ECF.

It matters if the person is using Kanthal and hitting 0.14. The coil will not fire!
If the person is using a titanium or Nickel and is using the coil in Temperature Mode then yes he could fire the coil.

The vaper needs to understand what they are using as the coil and what mode they are trying to fire the coil in. @MrVapePineapple I hope this helps you.

Kanthal Wire (NON TC MODE) Resistance: 0.1 - 3.5ohm for Variable Wattage
Titanium and Nickel Wire: Resistance: 0.05 - 1.5ohm for Temperature Control