Attack of the Hana Modz Clone. Let's wait together!

[lsutiger]

Thanks for sharing! I will have to get one.

 

[chief63]

Mine has not burst into flames yet. Maybe I'm doing it wrong.

 

[lsutiger]

Received my black no-logo yesterday, I love it. Only problem I had with it was the bottom screw was on WAYY too tight and it took me a while to figure out how to get it off, ended up using a eyeglass repair screwdriver and a pair of pliers lol. was really worried about stripping it or something. So far so good though. On rip trippers review he was saying a big con of it was how when it goes into sleep mode you have to press the button and wait a few seconds before you can fire it but mine fires right up no problems. I'm kind of wondering if the one I got from A to Z vapor world labeled as a 'genome 30' is not from cloupor and actually from a different manufacturer. I doubt it though.

I am kind of iffy on the built in charger though.. I just don't trust it. I really don't want to keep having to take the battery out and charging it on my regular charger.. so if anyone can comment on how well the built in one works that'd ease my mind a little lol. I've also heard that it's a bad idea to screw and unscrew it a lot because it will destroy the threading..

I had to use the same tactic to get one of the screws out. I have gone through two full charges through a USB charger via an AC outlet. I attempted through the computer, but it was taking way to long. No issues so far.

 

[CurlyxCracker]

Agreed, and i think that will drop the prices even more on these DNA clones , i wouldn't be surprised if you can get them well under $50.00 in the future .

I also think someone will end up just selling the enclosure , not paying $50.00+ for a small aluminum box when i don't want the whole package.

I've seen several group buys and posted on in this thread for just the enclosure

 

[CurlyxCracker]

im sure there is a way to flash the ship the same way people jtag. if you wanna screw around with that haha.

I wouldn't doubt the data on the chip has been "fused" only way I know to bypass is deleting all the data...

 

[CurlyxCracker]

agreed and also made the purchases feeling as the same as Retird (could gut the box and build with known quality parts if need be).

my major issue is that cloupor seems to be pumping these out without 100% testing the shorted atty safety feature with a known resistance.

i was very nervous because of a few cases where the canas circuit board failed and lead to a fire. this lead me to physically test my 2 canas to be sure the shorted atty safety feature was indeed functioning. what i found was a little disheartening, i used an rda with a short section of #24 guage A1 with a resistance of 0.24 ohms (tested with a known high quality and accurate multimeter). i removed the back cover and made sure i could quickly remove the battery if needed.

my black cana displayed shorted atty and did not fire.
my orange cana displayed a resistance of 0.3 and indeed did fire. i shortened the length of A1 and tested again at 0.18 ohms which now
showed shorted atty and did not fire.

please guys if you have the capability of safely testing the shorted atty feature do it. i for one will not run any atty below 0.8 ohms on these because of the inaccurate resistance measurement variance.

There HAS NOT been a fire or explosion! Fried chips yes. The one in particular I believe you're referencing the original story of NO FIRE has been recanted and replaced with a more dramatic one.
That said, verifying short protection SHOULD still be done...

 

[joecil]

Agreed, and i think that will drop the prices even more on these DNA clones , i wouldn't be surprised if you can get them well under $50.00 in the future .

I also think someone will end up just selling the enclosure , not paying $50.00+ for a small aluminum box when i don't want the whole package.

Actually you can get the DNA 30 and DNA 20 clones from fasttech. $27.00 HANA MODZ Pack DNA 30 VW Modules - 7-30W at FastTech - Worldwide Free Shipping and neither is near $50 really but more like $27.

 

[CurlyxCracker]

Actually you can get the DNA 30 and DNA 20 clones from fasttech. $27.00 HANA MODZ Pack DNA 30 VW Modules - 7-30W at FastTech - Worldwide Free Shipping and neither is near $50 really but more like $27.

Using the chips from the ones FT sells....

 

[joecil]

Using the chips from the ones FT sells....

I don't know really just saw them listed today. I would assume they are probably pretty much all made at the same place though.

 

[bryyyan]

For the v3 clone wrap from jwraps. The bottom piece is one piece so I after I applied it I cut it to separate the bottom of the mod from the bottom part of the battery door

 

[cheesestain]

Yep, Toronto. It went from BUFFALO to ROCHESTER, to NEW YORK, to JAMAICA, and now it's back to NEW YORK.

Definitely the scenic route

You'll probably get yours first.

Did you pay extra for priority shipping?

 

[labowsky]

I wouldn't doubt the data on the chip has been "fused" only way I know to bypass is deleting all the data...

isn't that what flashing entails though?

 

[CurlyxCracker]

isn't that what flashing entails though?

Well, yes. But, the goal is to fix the existing code, not write one from scratch. And in order to read the code you would need to bypass the fuse. Think of it like DRM.

 

[Fegbri]

Finally came and I am very happy!! Color is a gorgeous royal blue. Experienced the 2-3 button wake ups, and my smoke omnitester shows it is showing +.2 volts. All stuff I can totally live with and function with a smile. The vape...OMG! Now some vape porn:

 

[Fegbri]

And definitely anodized. You can see here a great picture of the machining lines in the aluminum.

 

[labowsky]

Well, yes. But, the goal is to fix the existing code, not write one from scratch. And in order to read the code you would need to bypass the fuse. Think of it like DRM.

then we would want the source code haha what i was getting at was we could flash the chip if we can figure out a way to basically jtag it. instead of waiting for a chip that allows flashing VIA the USB.

 

[herb]

Actually you can get the DNA 30 and DNA 20 clones from fasttech. $27.00 HANA MODZ Pack DNA 30 VW Modules - 7-30W at FastTech - Worldwide Free Shipping and neither is near $50 really but more like $27.

I haven't figured out how to rig those chips to the enclosure yet , seems it could be complicated. If i was to buy a clone from FT i would probably study how the chip is wired and just use it as is .

If it dies i would then be able to just buy the chip on the cheap from them and replace it myself . Who knows for sure how reliable any of these DNA chip variants are , who can say with certainty one is better than another with these clones.

If one is proven to be better i wouldn't have a problem paying more but if it's not proven i would prefer to spend $52.00-$56.00 total than $70.00+

 

[MrPlink]

Blue looks great Fegbri

 

[ClintS]

Yep, Toronto. It went from BUFFALO to ROCHESTER, to NEW YORK, to JAMAICA, and now it's back to NEW YORK.

Definitely the scenic route

That may not be quite the long scenic route that it seems to imply - there is a post office at
JAMAICA › 8840 164TH ST
JAMAICA, NY 11432-9998

Still a scenic route to Toronto! Hopefully they get it to you soon.

 

[retird]

Not a very good picture but you get the jest of it.....( clone with charging light hole drilled...and one of the stealthy mods for size comparison ) and to cut out most of the glare...

[/URL]