Attack of the Hana Modz Clone. Let's wait together!

Status
Not open for further replies.

Iceclouds

Senior Member
ECF Veteran
Jan 17, 2014
156
105
Miami Lakes, Florida
WTH... happened to this thread....man this was one of the most fun and interesting threads I have ever been a part of.... it was subject driven no matter what side you were on it stayed on Point, now it has become no better than a Social Gathering and
Trolling Thread like a Facebook Thread..... what a shame........ IMO......
 

Yellow Hawk

Senior Member
ECF Veteran
Verified Member
Just got tracking info on my Cana mod #4809 blue, ordered the 18th from elev8vape!

Sent from my ADR930L using Tapatalk

Not trying to be a Kill Joy, but, you DO realize that the Cana Mod is a DNA 30 mod clone. Meaning, it is limited in voltage from 4-8 VDC. That, means NO low resistance stuff, down to about 1.0 ohms, they are great. Below that, they start to show their hind parts. at .7 give up. Just letting you know, didn't read the whole how ever many hundred pages there are, so, I didn't see if any body got the reason, that the DNA30 DIED. At the time it was made, It was VERY hard to get a chip to go much under 4.0 vdc, NOW however, and for a while, it is VERY possible. MANY of them, go down to 1.5 vdc, letting current do the work, rather than voltage. Power, is what makes the heater, heat. Not JUST voltage, or JUST current, but, the product there of.
But, if your a 1.,0 ohm, and up kind of person, You'll love it. Hope you do. They were kind of neat in their day. I've got a load of the DNA30 chips, and maybe in a couple of years, I'll get less attached to them, and dump them. Until then, I just stare at them, and think of days when I could NEVER get my hands on one. The Nimrod who ran the co. sold them ONE day on his site, for a couple of hours, and that was IT. The rest, went to big companies making mods, and overseas. I got all of mine, from one of the U.K companies that went belly up.
Enjoy, hope I didn't sound like a kill joy. Just wanted needed info. out. And, to play the death Knoll for Evolv, you know, burial services being announced, SOON.

Yellow Hawk
 

Yellow Hawk

Senior Member
ECF Veteran
Verified Member
WTH... happened to this thread....man this was one of the most fun and interesting threads I have ever been a part of.... it was subject driven no matter what side you were on it stayed on Point, now it has become no better than a Social Gathering and
Trolling Thread like a Facebook Thread..... what a shame........ IMO......

Opinions Vary!
 

Iceclouds

Senior Member
ECF Veteran
Jan 17, 2014
156
105
Miami Lakes, Florida
Opinions Vary!

Of course opinions vary, but about what? What this thread was all about is not was is being discussed here any longer, Opinions are GREAT as long as they are about the subject matter, not un-related issues........JMO and not directed at you, you are not the only one that has gone away from the subject matter of the thread.....
 

Macaiah

Senior Member
ECF Veteran
Verified Member
Dec 29, 2013
176
119
Okinawa, Japan
Sorry guys...waaaaay OT but I thought it was only going to be a 40W upgrade!
6ubahasu.jpg


Sent from my SC-02E using Tapatalk
 

CurlyxCracker

Ultra Member
ECF Veteran
Verified Member
Jan 29, 2014
2,006
2,584
Williamsport, PA
LOL...... Evolv is not dying and they are not even sick..... :)

In fact Evolv is in the process of their next big thing. Don't know what it is yet but supposedly it's a game changer (pbursardo's words). Also 1ohm and up?? Wt "letter after" e"" are you talking about? This thread is a dead horse getting ran over by a truck at this point.... I liked the speculation and debate over these devices before release, it had some form of ground to stand on. Now we're just saying nonsense?
Side note, this thread recently and in the past has gone off track, been here from the start and at the risk of this being deleted, it's been left to the trolls....
 

herb

Vaping Master
ECF Veteran
Mar 21, 2014
4,850
6,723
Northern NJ native , Coastal NC now.
You asked! I KNEW this would start a war.
What's Junk? DNA 20 and 30. IF the useable voltage range was larger, such as 3.5 or 3.0-8.0, would have been an entirely different Beast. A GREAT one. The 4.0 vdc lower limit, prevented low resistance (comparitively) from effective use. However, IF the resistance of your atty. is 1.0 ohms or greater, is a great piece of hardware. DO the math, and see what happens if you try and use a .5-.7 ohm atty. So, advertising a resistance range of .5-? is ludicrous.


I don't know where "junk" comes into it but it seems as long as they are used for the application they are intended for they kick a_ _ , thats no different than anything else.
 

herb

Vaping Master
ECF Veteran
Mar 21, 2014
4,850
6,723
Northern NJ native , Coastal NC now.
In fact Evolv is in the process of their next big thing. Don't know what it is yet but supposedly it's a game changer (pbursardo's words). Also 1ohm and up?? Wt "letter after" e"" are you talking about? This thread is a dead horse getting ran over by a truck at this point.... I liked the speculation and debate over these devices before release, it had some form of ground to stand on. Now we're just saying nonsense?
Side note, this thread recently and in the past has gone off track, been here from the start and at the risk of this being deleted, it's been left to the trolls....

Speculation and debate is still going on , i don't recall any post going off track but i have only been following it recently so maybe it did at some point .

Going outside of the dna's intended use and using it for something other then what it was designed to be used for and then calling it garbage when it fails to perform is a ridiculous argument , it's like saying a Ford Mustang sucks because it's not good for off roading lol.
 
Last edited:

CurlyxCracker

Ultra Member
ECF Veteran
Verified Member
Jan 29, 2014
2,006
2,584
Williamsport, PA
Speculation and debate is still going on , i don't recall any post going off track but i have only been following it recently so maybe it did at some point .

Going outside of the dna's intended use and using it for something other then what it was designed to be used for and then calling it garbage when it fails to perform is a ridiculous argument , it's like saying a Ford Mustang sucks because it's not good for off roading lol.

I personally brought up the neighbor kids civic with modified exhaust a while back that went off on multiple tangents and now the fury and being a car collector. <Both of which I could care less about if being discussed or not in this thread just providing evidence that it has gone off track a few times.
Now on to the ramblings that make no sense... Throw a 0.7ohm coil at 23w (rda of course) tell me why in the world this won't work? It's 4v. I regularly run my 0.8ohm at 22w. Am I not doing this? Am I making it up for the heck of it?
I'm glad you have a sx350 mod or comparable device. I like them, I truly do. My next mod will be a variation of the sx chip. But not everyone needs that for a good vape. The DNA 30 chips are older technology, but soon the 350 will be too, it's how technology works. On a pure wattage capability basis, 50w is nothing! There's 200w mods being sold for $165. I don't do cloud chasing comps so that doesn't appeal to me at all but, point being, new tech is released everyday, buy it today, new version tomorrow. As far as upgrading firmware, you're still limited by the hardware in the long run... The DNA still has a place in the vaping world.
 

herb

Vaping Master
ECF Veteran
Mar 21, 2014
4,850
6,723
Northern NJ native , Coastal NC now.
I personally brought up the neighbor kids civic with modified exhaust a while back that went off on multiple tangents and now the fury and being a car collector. <Both of which I could care less about if being discussed or not in this thread just providing evidence that it has gone off track a few times.
Now on to the ramblings that make no sense... Throw a 0.7ohm coil at 23w (rda of course) tell me why in the world this won't work? It's 4v. I regularly run my 0.8ohm at 22w. Am I not doing this? Am I making it up for the heck of it?
I'm glad you have a sx350 mod or comparable device. I like them, I truly do. My next mod will be a variation of the sx chip. But not everyone needs that for a good vape. The DNA 30 chips are older technology, but soon the 350 will be too, it's how technology works. On a pure wattage capability basis, 50w is nothing! There's 200w mods being sold for $165. I don't do cloud chasing comps so that doesn't appeal to me at all but, point being, new tech is released everyday, buy it today, new version tomorrow. As far as upgrading firmware, you're still limited by the hardware in the long run... The DNA still has a place in the vaping world.


Ok, now i remember , i was a part of that as well and commented on the loud exhaust so your not the only one who went off track. I was not aware or just don't remember (more likely) about you commenting on the DNA not firing with your 0.7 build and i did not mean i discounted what you were saying , i 100% believe you.

The thing that irks me is the inconsistency of the device, some say it fires with everything they tried while others say it doesn't , i would really like to know the why's of this.

I think you may have confused me with someone else , i have not yet acquired a device with the DNA chip or the SX chip , just following what everyones saying and debating which would be better for my needs.
 

Iceclouds

Senior Member
ECF Veteran
Jan 17, 2014
156
105
Miami Lakes, Florida
In fact Evolv is in the process of their next big thing. Don't know what it is yet but supposedly it's a game changer (pbursardo's words). Also 1ohm and up?? Wt "letter after" e"" are you talking about? This thread is a dead horse getting ran over by a truck at this point.... I liked the speculation and debate over these devices before release, it had some form of ground to stand on. Now we're just saying nonsense?
Side note, this thread recently and in the past has gone off track, been here from the start and at the risk of this being deleted, it's been left to the trolls....

Could not agree with you more Curly, it has become a Trollers haven..........the guy that says the DNAs are dead, if you read thru his 2 long entries he keeps referring to the "large pile" of chips that he just has to get rid off......hummmm interesting ha?
 

st0nedpenguin

Moved On
ECF Veteran
Verified Member
Jun 24, 2010
1,317
1,109
WA
WTH... happened to this thread....man this was one of the most fun and interesting threads I have ever been a part of.... it was subject driven no matter what side you were on it stayed on Point, now it has become no better than a Social Gathering and
Trolling Thread like a Facebook Thread..... what a shame........ IMO......

Welcome to the internet, enjoy your stay.
 

CurlyxCracker

Ultra Member
ECF Veteran
Verified Member
Jan 29, 2014
2,006
2,584
Williamsport, PA
Ok, now i remember , i was a part of that as well and commented on the loud exhaust so your not the only one who went off track. I was not aware or just don't remember (more likely) about you commenting on the DNA not firing with your 0.7 build and i did not mean i discounted what you were saying , i 100% believe you.

The thing that irks me is the inconsistency of the device, some say it fires with everything they tried while others say it doesn't , i would really like to know the why's of this.

I think you may have confused me with someone else , i have not yet acquired a device with the DNA chip or the SX chip , just following what everyones saying and debating which would be better for my needs.

No, I wasn't referring to you. I was just providing iceclouds with evidence backing his off track statements.
If you don't feel comfortable with making the leap to purchase any of the higher wattage chips yet, and want to gather information, by all means!
I was referring to the person who says these devices are only made for 1ohm and up, and that Evolv was dead, etc.. These statements are the ones that bother me because of people like you (no offense meant) who are looking into a device like this. My understanding is the ECF us here to inform not misinform and flame...
 

DJTim

Super Member
ECF Veteran
Dec 30, 2013
565
2,470
Lindenhurst (Chicago), Illinois
Hey everyone - this will be my last post in here because IT FINALLY ARRIVED! I was watching my e-mail like a hawk. Unboxed my Orange DNA clone and everything looks good. Nice finish, no scratches. Screws came out easily. Battery holder is snug.

I picked up a Copper Tobe Atty clone Friday and it looks amazing with copper/orange. I'm enjoying a 1.2 ohm 26 gage single coil at 30 watts. It's amazing the difference between a mech and a regulated device. Single click takes it out of sleep. Smaller 510 connector as well.

As you can see below - I have some vaping to catch up on. Hope everyone enjoys their device as I am right now.

View attachment 351773
 
100 watt is NOT around corner, and will NOT be marketed like the sx350. Looks like it will be marketed to the high end Mod Makers, so as to make it unavailable to modders.
There are SOME of the 100's already here. And, a few more are coming in very shortly, test basis. I have seen one. to the eye, it is identical to the sx350. I have a boat load of the sx350's, and have upgraded them all to 50watts, that 40 watt firmware ended up being buggy. So they released the 50 watt firmware early.
It works great at 50 watts. That, is what it was designed for. IF it's still not on DL site, and anybody needs it, contact me, and I'll get it to you. Contact via PM please. I already got heand slapped once, as I told somebody IF they wanted some of the HUGE quantity of DNA's I have, to make a ridiculous offer, and email me. They said, I was trying to sel them on the forum. The opposite, I don't want to. WILL NOT sell them. Likemy old 64 Plymouth Sport Fury, I love it, My Baby, ONLY wife is more important. Dna'S FALL in there somewhere. They sit, and I look lovingly at them, and remember when I could not get even ONE, and now, I would not put a mod with one together for any money, there JUNK. No wars please, remember, each person has a right to his/her opinion, even if it's wrong.


Im confused are you saying there junk but love them anyway? Don't understand what your saying abou the dna chip?
 
Status
Not open for further replies.

Users who are viewing this thread