Attack of the Hana Modz Clone. Let's wait together!
- Thread starter Fathomrock
- Start date
- th_trl_thread_readers 0
- Status
Ugh, the VTR is the only device I have that could read ohms currently. I recently bought a Fogger v4 and used it to read on the VTR, and it indicate 0.6 OHM on build.. Considering nurmerous report that it could fire at sub ohm I did exactly that and it fires on a several long hits that given night. The next morning it completely stop firing, the led light battery indicator flash when push but it won't fire. A hard lesson learn with devices that couldn't fire at sub ohm regarding product description 
This blows.. Now I am looking forward for my Hana clone @ illvape
This blows.. Now I am looking forward for my Hana clone @ illvape
Last edited:
I sent Illvape a message on the 4th of May asking if the mass email applies with the Logo unit, and I have yet to hear from them >_<
You can get them from lots of places.
It's not actually a Kayfun Nano, but a regular Kayfun with a nano drop kit.
The kit includes two steel rings that replace the rings which are on either side of the plastic tank section, and a nano chimney (just the top part) to replace the standard chimney top. Some will come with another plastic tank section, but the one that came with the Kayfun is the same.
It reduces the Kayfun by 10mm. Throw a SS2 Top Cap by Nano (not to be confused with the nano drop kit which is just a generic term) and you shorten it up by another 5mm or so.
I got my drop kit on eBay (though you can get them cheaper on Fast Tech if you're willing to wait) from here. The seller has good feedback and shipping was lightning fast.
Kayfun Nano Stainless Steel 4 Piece Color Tank Kit | eBay
You can also get just a nano full plastic kit which eliminates the stainless rings altogether. I got one from here.
Kayfun Nano Clear Tank | eBay
I got my SS2 Top Cap from here.
Nova SS2 - Kayfun Top Cap - VaperZon | VaperZon
Here is what it looks like all together.
The one on the left (Black Copper Stingray clone) has a quartz nano kit installed (no longer in use because filling the quartz kit is a PITA), and the right (Tree of Life clone) has the nano kit I'm talking about with the top cap.
Hope this helps.
Because they are notoriously difficult to get and the chasm between $70 and $250 is vast.
I am supporting American small business by purchasing from a US-based vape shop.
I originally chose to support Hana, but the terrible customer service and damaged and defective units customers received for the premium price of $250 completely turned me off.
Businesses don't automatically deserve to be supported just because they are located in the USA.
I've been toying with the idea of ordering a drop kit for quite a while now. I have a few KFL+ originals and want to shorten one up for my new H-Clone. I was hoping to find a seller that someone would vouch for. Thanks! I just picked one up from that seller on Ebay that you recommended.
You can get them from lots of places.
It's not actually a Kayfun Nano, but a regular Kayfun with a nano drop kit.
The kit includes two steel rings that replace the rings which are on either side of the plastic tank section, and a nano chimney (just the top part) to replace the standard chimney top. Some will come with another plastic tank section, but the one that came with the Kayfun is the same.
It reduces the Kayfun by 10mm. Throw a SS2 Top Cap by Nano (not to be confused with the nano drop kit which is just a generic term) and you shorten it up by another 5mm or so.
I got my drop kit on eBay (though you can get them cheaper on Fast Tech if you're willing to wait) from here. The seller has good feedback and shipping was lightning fast.
Kayfun Nano Stainless Steel 4 Piece Color Tank Kit | eBay
You can also get just a nano full plastic kit which eliminates the stainless rings altogether. I got one from here.
Kayfun Nano Clear Tank | eBay
I got my SS2 Top Cap from here.
Nova SS2 - Kayfun Top Cap - VaperZon | VaperZon
Here is what it looks like all together.
The one on the left (Black Copper Stingray clone) has a quartz nano kit installed (no longer in use because filling the quartz kit is a PITA), and the right (Tree of Life clone) has the nano kit I'm talking about with the top cap.
Hope this helps.
Glad I could help.
I don't mess around on eBay. If you don't have at least 1000 feedback score, I won't do business with you. Certainly I make exceptions, and I understand that everyone has to start somewhere, but I like the idea of a seller being well vetted by the market before I hit Buy It Now! I will always spend more money with a seller that has 1000+ ratings.
http://www.illvapes.com/blog/heres-the-update-cloupor-gave-us/
Sent from my HTC6525LVW using Tapatalk
Last edited:
Now that I can see the production process I'm betting the test unit is a way to buy more time. Over promised and under delivered comes to mind. I hope this helps calm some of the speculation about the seam and battery compatibility. Looks like they are anodized and not painted as well. I order black 1:1 so I'm pretty happy with what I see. Hell the craftsmanship looks better than some of the hana modz I've seen
Sent from my HTC6525LVW using Tapatalk
Sent from my HTC6525LVW using Tapatalk
I hope the craftsmanship is better than the hana.An old modder friend of mine got a hana when they first came out and deceided that the hana was a hack job.He was proven right.
How was he proven right? Mine is perfect. I'd be interested to know what proof there is that it's a hack job. Maybe I've missed it in my 3 weeks with it.
Per an email from illvapes the 1:1 with the logo is also made by clouper. Sleep easy my friend we are only a week or two away from an awesome device
Sent from my HTC6525LVW using Tapatalk
I hate to be a ......... and seem like a jerk but i will put my dz up against any other dna 30 the craftsmanship is remarkable. But as far as i can see those clones look amazing!!
that is exactly what i said a couple of days ago... this whole "sample" business is just an excuse to give them an extra week for catch up on the overwhelming orders they received and in the end couldn't deliver on time. i dont wanna sound like a jerk but, how do i put this... i cant see the people they have putting the box mod together ever having put a box mod together before this, if that makes sense. which would explain why the inside looks a jumbled mess, i just hope the soldering holds up for the long run and it was done correctly.
- Status
