They very well could have been. I saw your convo with elev8vape stating they won't start until after the samples have been received.
Attack of the Hana Modz Clone. Let's wait together!
- Thread starter Fathomrock
- Start date
- th_trl_thread_readers 0
- Status
Super...I ordered both lolI ask Illvapes if the mass email applies to the "Logo Version." and they responded..
Re: Hana clone "With logo"
6th May 2014 @ 4:15 PM
ILLVAPES Said:
Hi Phillip,
It applies to both. It is the same manufacturer, however, they only produced a limited amount of hana printed logos. You will be one of the few that get one with a logo. Please check our blog for weekly updates.
Best Regards,
Illvapes Team
Frickin' sweet
I suppose so...but each person is sitting in front of full bins of parts.
Maybe this is just the prototype sweatshop...
Ugh, the VTR is the only device I have that could read ohms currently. I recently bought a Fogger v4 and used it to read on the VTR, and it indicate 0.6 OHM on build.. Considering nurmerous report that it could fire at sub ohm I did exactly that and it fires on a several long hits that given night. The next morning it completely stop firing, the led light battery indicator flash when push but it won't fire. A hard lesson learn with devices that couldn't fire at sub ohm regarding product description
This blows.. Now I am looking forward for my Hana clone @ illvape
How do u like the fogger? Getting ready to clean mine and do the first build.
$40 for a logo
I MUCH prefer the no logo version... ESPECIALLY now that we know they are the same (except for the logo)!
I'm with you on that. Even if I did like the logo, there's no way I would pay $40 more for it. I'll probably end up putting a wrap on mine anyway.
I ask Illvapes if the mass email applies to the "Logo Version." and they responded..
Re: Hana clone "With logo"
6th May 2014 @ 4:15 PM
ILLVAPES Said:
Hi Phillip,
It applies to both. It is the same manufacturer, however, they only produced a limited amount of hana printed logos. You will be one of the few that get one with a logo. Please check our blog for weekly updates.
Best Regards,
Illvapes Team
Frickin' sweet
That is messed up! $40 for a logo. Did you notice the logo pre order is closed on their site, but they put them up on ebay ( says over 10 available) for $119.99!! I think that is f-d up! This thread probably ruined the logo sales so they closed it and are getting $10 more from ebay impulse buys. Plus they have 2 user names and 2 posts! I'm all for making profit, but don't like tricking people to gain a buck. Happy I ordered from Elev8. I would cancel and just get the no logo. Still available and I'm sure will all get within days of each other. Good luck!
At least you didn't do this!!!! Crazy!!!
DNA30 Mod 1 1 Hana Clone Colors w Sony VTC4 High Drain Battery Preorder | eBay
DNA30 Mod 1 1 Hana Clone Colors w Sony VTC4 High Drain Battery Preorder | eBay
And a LiPo, when I ordered I don't think they had the NoLogo one avaiable.$40 for a logo
Spoke to elev8vape, there has been talk of logo versions coming with a lipo. NONE of the Cloupor clones come with a lipo! Both logo and none logo versions require a 18650.
They realized they had to change there price to compete with everyone else once they started dropping to $80-70 and they couldn't change the logo price since people had already paid it, so they offered up the no logo for cheaper and tried to say that the logo one was better quality for a while.... whatever, now the truth is $40 for a logo.... ..., id be canceling that unless you just cannot live without pretending to have a real hana mod lol.
BTW, that is most likely a lie that they don't start production till sample's are approved, the photo's prove they are working on it and they are just buying time to get 100's if not 1000's pumped out in time. Which I still think there will be another delay. Hope not but I bet it's going to be closer to the end of may then the beginning.
In the pictures of assembly there is a interesting clear plastic sticky back looking thing, look's like the screen slides into it and the chip is glued to it and then it's stuck to the inside of the box.... interesting. I don't know if the have a deal like that on the original one. Seems like it would protect the screen if it's not actually exposed to the outside. Maybe they will be improved from the original's in some ways. But also that one that is completely assembled with the back off of it and battery in it. Looks like they spilled hot glue all over the place on the wire's even the chip lol.
Idk about that. Let's say they Cloupor said that and are buying time, what if the vendors feel it's not up to par? They wasted all the $ on parts and labor (I realize labor is far cheaper in china). Which results in a useless product and satisfying the vendors that already placed orders. IMHO Cloupor would be done. And judging from the emails sent, they understand that that would "bankrupt" them.
I do need to say that the above is just my opinion. I don't really know for sure.
I was wondering why the battery coating was peeled back on the positive side.
I'm pretty sure the Illvapes ones with logo are Cloupor and they have a LiPo I ordered one.
Hana Modz Pack v3 DNA30 1:1 Clone (Pre-Order) - ILLVAPES
Also ordered the NoLogo (No Battery)
No-Logo Hana Modz DNA 30 1:1 Clone (Pre-Order) - ILLVAPES
Doesn't make sense to have the Logo one and NoLogo one from different manufacturers.
Their Videos show the manufacturer is Clouport
Hana Modz Pack v3 DNA30 1:1 Clone (Pre-Order) - ILLVAPES
Also ordered the NoLogo (No Battery)
No-Logo Hana Modz DNA 30 1:1 Clone (Pre-Order) - ILLVAPES
Doesn't make sense to have the Logo one and NoLogo one from different manufacturers.
Their Videos show the manufacturer is Clouport
Check my post # 1023, Illvapes does
- Comes with a 2400 mAh Li-po but can be replaced with any 18650 battery. (hint hint: Sony VTC5!)
Last edited:
Why the VTC5? There are many batteries that are even more capable. The new Efest 35A batteries give 5A of headroom over the VTC5 with only a 100mah drop in capacity.
- Status
