Attack of the Hana Modz Clone. Let's wait together!
- Thread starter Fathomrock
- Start date
- th_trl_thread_readers 0
- Status
Sweet - That looks just like my Clone and I to have a Kick XXX Dz XMOD 
So I ordered a non logo I don't even care though.
That's it beside the dz30l which dwarfs it lol this will be more pocket friendly I'm assuming .
Sent from my HTC6525LVW using Tapatalk
Good thing I ordered 3 of the floating ones before they ran out. Got one on my SX350 mod now. Very nice looking on it too. Might have to look at putting one on the ana 30 when it comes in. Its a wait and see thing. Poor guy on ebay I bought from has gotten negative feed back for his pre sale of the 30. He will have them in hand by Saturday and should be to me next week.
Elev8 just posted an update with a spreadsheet showing the last known order numbers shipping for each color rounded to the nearest 100. He said he is planning on updating it roughly daily. Already over 1000 shipped out.
Sent from my SCH-I545 using Tapatalk
Sent from my SCH-I545 using Tapatalk
Never turns GREEN.
I have been using a new LG18650HE2 in my WetVapes Clone since Monday and the charging light is still RED every morning after charging all night. Yesterday I charged my clone for over 12 hours and the charging light never turned green. Today I will swap to a NCR18650PF and try again. I have tried three different micro USB cords and three different USB power sources.
Curious is anyone has information regarding the charging light turning green or not?
I have been using a new LG18650HE2 in my WetVapes Clone since Monday and the charging light is still RED every morning after charging all night. Yesterday I charged my clone for over 12 hours and the charging light never turned green. Today I will swap to a NCR18650PF and try again. I have tried three different micro USB cords and three different USB power sources.
Curious is anyone has information regarding the charging light turning green or not?
It DOES NOT turn green. I told Wet Vapes to take that bit of info off the Clone page on their site. Looks like it's still up there. It's even on Cloupors site and they make the damn thing!!! The red light DIMS when the clone is charged.
Time served...I'm a contractor now. Been overseas for the past 16 years, you would think I would have gotten used to it by now. Most vapemail I get sent to my house but there are times where I have to deal with MPS and play the waiting game...Semper Fi
Sent from my SC-02E using Tapatalk
Morning coffee and a vape.....
I really hate that so many different issues are cropping up about this clone. I don't care if it's a 70 dollar or a 200 dollar piece it should not have that many different issues IMO. The vendors are caught in the middle again between the customer and China. From all I been able to read it seems that China offers no warranty (other than DOA) to the vendors thus any warranty is only given by the vendor. Most vendors sites that I checked did not have any warranty information posted on their site (not to say they don't give a warranty). Gotvapes indicated a 7 day warranty and that China offered them no warranty. So, to me this sends a message of "buyer beware" but that's just my take on that subject.
Hopefully these issues only involve a "very few" but time will tell.
At any rate, the main reason for my morning post is to post a link for all those who have "pm'd" about "how to replace X,Y, or Z"....
There are alot of tutorials by mamu on modding....and will give you a how-to example. Hopefully the link will aid you should you decide to replace stuff in the clone....proceed at your own risk and be safe..
http://www.e-cigarette-forum.com/forum/battery-mods/366666-milo-dna20d-mod-step-step-how.html
And another:
http://mamumods.com/tutes/arlo_howto.pdf
I really hate that so many different issues are cropping up about this clone. I don't care if it's a 70 dollar or a 200 dollar piece it should not have that many different issues IMO. The vendors are caught in the middle again between the customer and China. From all I been able to read it seems that China offers no warranty (other than DOA) to the vendors thus any warranty is only given by the vendor. Most vendors sites that I checked did not have any warranty information posted on their site (not to say they don't give a warranty). Gotvapes indicated a 7 day warranty and that China offered them no warranty. So, to me this sends a message of "buyer beware" but that's just my take on that subject.
Hopefully these issues only involve a "very few" but time will tell.
At any rate, the main reason for my morning post is to post a link for all those who have "pm'd" about "how to replace X,Y, or Z"....
There are alot of tutorials by mamu on modding....and will give you a how-to example. Hopefully the link will aid you should you decide to replace stuff in the clone....proceed at your own risk and be safe..
http://www.e-cigarette-forum.com/forum/battery-mods/366666-milo-dna20d-mod-step-step-how.html
And another:
http://mamumods.com/tutes/arlo_howto.pdf
Last edited:
To all those with the 2- click button push: I watched a review on youtube that said when the unit goes to sleep mode, it requires one push to wake up, then need to *wait* for a second or two until the display pops back on, then click again to fire. Is this problem different from that supposedly normal operation? I'm a bit confused before mine gets here tomorrow...
You should probably stay away from most Chinese VV/VW mods then. Whatever you do, do not buy an Innokin SVD, I had two of those fail within 4 months, both outside of their short warranty period.
You must remember, this is a CLONE. It is a cheap Chinese knock-off and is NOT made using the same parts or care as the real thing. The quality control and preproduction testing is questionable at best, and at $70 RETAIL they probably only cost $20-$25 each to produce. Does this sound like something you should EXPECT to be rock solid reliable and work flawlessly every time?
That's why I'm buying one with the understanding that it might fail. If it doesn't and lasts years and works great, that's fantastic. I'll end up only spending $70 and have a great quality APV. However, if it fails then I've got a great box kit to build a real DNA30 or possibly something better out of. Who knows, maybe 6 months from now Evolv will have a DNA50 chip and lo and behold, that's when my clone chip dies.
It's not ideal, we all want these things to last, but when compared to the price of real DNA30 mods out there it's a way to end up with the exact same chip and build quality at half the price or less.
The only thing with these Fasttech units is the Logo.....don't want it, not because I am concerned about Hana but because I think the logo is Horrible.....otherwise it looks nice.
My clone is from Elev8. The light on mine turns green when fully charged. It's a dim glow from behind the screen. I can only see it in the dark.
Sent from my Nexus 7 using Tapatalk
The fact that the picture on Fasttech's own website shows a visible manufacturing defect on the top-right corner of the box does not inspire confidence either.
After dealing with several Chinese Factories over the last 2 months I can tell you that to them it makes ZERO difference how the product looks or functions.....they are in the business of Mass Producing and that is all, they DON'T care of the end user as long as they receive their few dollars (and believe me the kill for .10 cents) so with that being said it does not surprise me that they would use a picture with a noticeable DING on the box for advertising purposes......
You should probably stay away from most Chinese VV/VW mods then. Whatever you do, do not buy an Innokin SVD, I had two of those fail within 4 months, both outside of their short warranty period.
You must remember, this is a CLONE. It is a cheap Chinese knock-off and is NOT made using the same parts or care as the real thing. The quality control and preproduction testing is questionable at best, and at $70 RETAIL they probably only cost $20-$25 each to produce. Does this sound like something you should EXPECT to be rock solid reliable and work flawlessly every time?
That's why I'm buying one with the understanding that it might fail. If it doesn't and lasts years and works great, that's fantastic. I'll end up only spending $70 and have a great quality APV. However, if it fails then I've got a great box kit to build a real DNA30 or possibly something better out of. Who knows, maybe 6 months from now Evolv will have a DNA50 chip and lo and behold, that's when my clone chip dies.
It's not ideal, we all want these things to last, but when compared to the price of real DNA30 mods out there it's a way to end up with the exact same chip and build quality at half the price or less.
Funny you should mention the Innokin SVD, I've had mine since September 2013 and no issues whatsoever.
Thank you guys for responding about the light turning green. The light is visible when viewed in low light and even easier to see at the correct angle and viewing around the edge of the display.
Someone posted in this thread several days ago about the LG batteries being used in this clone. They simply asked if anyone was using the LG 35amp batteries,,,,, now I would like to know why he asked???????
I haven't seen anyone post or heard about using them. The popular seems to be the Sony vtc4 or vtc5's. Probably a higher amp limit than is needed for this device...
*edit
But better a higher amp limit than a failed battery.
*edit
But better a higher amp limit than a failed battery.
Last edited:
I use them, but they aren't 35 amp they are 20. Same with the efest 2500 35 amp they are just re wrapped LGs
- Status
