Attack of the Hana Modz Clone. Let's wait together!

[CurlyxCracker]

How far back is the PSA about not throwing anything below a .6 on there? I'm only vaping at 15 watts at this point. I won't be going above that until I start wrapping my own coils.

Idk about that I ran a 0.5ohm for first 24hrs I had it

 

[CurlyxCracker]

Mine is green but I am letting it charge overnight.

From elev8?seems to effect wetvapes exclusively

 

[CurlyxCracker]

How far back is the PSA about not throwing anything below a .6 on there? I'm only vaping at 15 watts at this point. I won't be going above that until I start wrapping my own coils.

I'm at 13w on my 1.4ohm kayfun. Between 22-30w with my Gaia. 20-22w with my omega

 

[MrPlink]

From elev8?seems to effect wetvapes exclusively

Mine has never turned green and it is from elev8.
Even with a bat fresh of my nitecore it didnt.
Not worried about that at all though

 

[MrBeo]

My Clone is turning GREEN once its charged and the "2" Click thing is Fine with me but I am sticking some 1200 psi epoxy on the charger port and fire button as the hot glue will not work long...

 

[kboxvegas]

Gotvapes is now carrying the cloupor unit's. They want $130 each though. Might be better off with eBay.

Sent from my SM-G900P using Tapatalk

 

[Chanlor Lami]

Got my red round 3 from 101vapes today and it's amazing. My only gripe is that the screws were a pain. I found the right screw driver for it though and now it works fine. Idk about the green light yet because I put a fully charged vtc4 in it. Overall its good quality and the voltage is right on the money. I did some math and the voltage it reads is pretty spot on.

 

[imabuddha]

Feeling blue because my blue cana still hasn't shipped from elev8 (order #709). Guess that shipment hasn't cleared customs yet. <sigh>

Maybe by end of June…

 

[tuney]

How far back is the PSA about not throwing anything below a .6 on there? I'm only vaping at 15 watts at this point. I won't be going above that until I start wrapping my own coils.

http://www.e-cigarette-forum.com/fo...lone-lets-wait-together-536.html#post13359419

the other posts were pretty far back basically stating members were not going to push the limits of this unknown chipset and 0.6 was mentioned a couple times.

you should be fine at only 15 watts.

 

[joecil]

http://www.e-cigarette-forum.com/fo...lone-lets-wait-together-536.html#post13359419

the other posts were pretty far back basically stating members were not going to push the limits of this unknown chipset and 0.6 was mentioned a couple times.

you should be fine at only 15 watts.

At .6 ohms at 15 watts you are running on the power in the battery. This clone chip like the DNA chips don't support the ability to go down so run straight off the volts in the battery. I'm running a 1.1 ohm coil on mine in a Kayfun Lite and it is at 14.3 ohms gives me the minimum of 4 volts. I did try a RDA today with a .54 ohm coil and the ohm reading blink till I got to 30 watts. Both however vaped very good at those settings I might add.

 

[Fegbri]

So glad it has no logo. Gives me chance to make it my own! Finally choose and ordered a white die cut vinyl decal for my "Tiger Mod". Will probably put it on then cover it with the jwrap clear carbon. I liked the look of the Hana logo shining through the carbon fiber. Here is my design. A little rough, but was just a quick design for the company to cut the decal.

What do you think?

 

[cheesestain]

That's sick bro!

Sent from my Nexus 4 using Tapatalk

 

[lot17ss]

So glad it has no logo. Gives me chance to make it my own! Finally choose and ordered a white die cut vinyl decal for my "Tiger Mod". Will probably put it on then cover it with the jwrap clear carbon. I liked the look of the Hana logo shining through the carbon fiber. Here is my design. A little rough, but was just a quick design for the company to cut the decal.

What do you think?
View attachment 343957

I like it! I see what you are going for. Too bad you cant etch it then put a clear wrap though.

 

[armadillo]

Looks great. There is an alternative that would allow etching:

Waterslide, Decal Paper, Image, Transfer Paper, Iron On, Decals

 

[Varelse]

woo-hoo! I'm around 1650 silver.

Now why did I go and get excited? No shipment, order still waiting fullfillment and no answer to my email. Too bad, I was ready to pick up some accessories. I'll take that cash elsewhere now. Won't be pre ordering anything again.

 

[keithvi]

I like it! I see what you are going for. Too bad you cant etch it then put a clear wrap though.

Because your clone is anodized, you may want to speak to a trophy/engraving shop in a town near you about laser engraving. I was quoted $12 and I am to provide the image. Unfortunately my clone is silver and they were unable to help me.

 

[entoptic]

It looks like you guys are right, the V3 on the real ones from the pics I have looked at, does not have the spaced out V 3. It is right together on the real ones like V3. That is easiest way to tell difference between them. I found a post that looks like someone was most likely sold a fake earlier in the month when someone probably got ahold of an early one somehow unless this was real and I am wrong about the V3 part and red see through part:

For Sale: CA FS: HANA MODZ V3 (BLK REG) + KF LITE PLUS v2

pretty sure the authentic does not say hana modz on the internal holographic stickers, I've seen a few videos to that effect..... Begun, the clone war has!

 

[JuicerJ]

Start a couple shill accounts and bid it up to 5k

This guy looks like he's bidding against himself trying to up the price. WOW !! I almost thinks if somebody is green enough to buy that clone thinking it's an original I would be scared for them using a 30 W mod. They would probably hurt themselves. SMH !!

 

[MrPlink]

So glad it has no logo. Gives me chance to make it my own! Finally choose and ordered a white die cut vinyl decal for my "Tiger Mod". Will probably put it on then cover it with the jwrap clear carbon. I liked the look of the Hana logo shining through the carbon fiber. Here is my design. A little rough, but was just a quick design for the company to cut the decal.

What do you think?
View attachment 343957

Looks good. Get it engraved and do a color fill and it will look even better

 

[ClintS]

http://www.e-cigarette-forum.com/fo...lone-lets-wait-together-536.html#post13359419

the other posts were pretty far back basically stating members were not going to push the limits of this unknown chipset and 0.6 was mentioned a couple times.

you should be fine at only 15 watts.

A couple of You Tube videos showed .3 and .4 builds firing. I ran a .5 build at 30 watts over the course of a couple of days, including several chain vapeing sessions, there were no issues except the short battery times. It does not much sense to run these builds on a DNA.